Advertisement

Journal of Wood Science

, Volume 64, Issue 4, pp 436–443 | Cite as

Evaluation of chemical treatments on dimensional stabilization of archeological waterlogged hardwoods obtained from the Thang Long Imperial Citadel site, Vietnam

  • Thanh Duc Nguyen
  • Yohsei Kohdzuma
  • Rie Endo
  • Junji Sugiyama
Original Article

Abstract

In this article, the conservation of seven archeological waterlogged woods (WW) with polyethylene glycol (PEG) 4000, trehalose, and feather keratin was investigated. The results showed that the dimensional stability of WWs significantly improved after the different treatments. The anti-shrink efficiency values of the WWs treated with keratin ranged between 72.5 and 96.2% depending on the species and degree of wood degradation. These values varied from 82.4 to 96.9% for the WWs treated with PEG or trehalose. Microscopic observations showed that the chemically-treated woods maintained their original cell structures, forms, and shapes. It was also revealed that the reinforcement of cell walls by the feather keratin treatment was different from those observed for the PEG or trehalose treatments. It was observed that PEG and trehalose primarily filled the wood voids, while keratin predominantly absorbed on the cell walls and middle lamellae. Based on the improved dimensional stability of wood, shortened impregnation time, removability of chemical, and esthetic results obtained from the treatment, keratin showed a good performance in average as a preservation agent.

Keywords

Archeological waterlogged wood Dimensional stability Feather keratin Polyethyleneglycol Trehalose 

Notes

Acknowledgements

This study was partly supported by Grants-in-Aid for Scientific Research (A) no. 25252033, Japan Society for the Promotion of Science, RISH Cooperative Research (database) and RISH Mission Research V, Kyoto University. The authors acknowledge the Thang Long Research Center, Hanoi, and the Institute of Archaeology, Vietnam Academy of Science and Technology for providing the archeological wood materials.

References

  1. 1.
    Bugani S, Modugno F, Łucejko JJ, Giachi G, Cagno S, Cloetens P, Janssens K, Morselli L (2009) Study on the impregnation of archaeological waterlogged wood with consolidation treatments using synchrotron radiation microtomography. Anal Bioanal Chem 395:1977–1985CrossRefPubMedGoogle Scholar
  2. 2.
    Christensen M, Kutzke H, Hansen FK (2012) New materials used for the consolidation of archaeological wood-past attempts, present struggles, and future requirements. J Cult Herit 13S:S183–S190CrossRefGoogle Scholar
  3. 3.
    Broda M, Mazela B (2017) Application of methyltrimethoxysilane to increase dimensional stability of waterlogged wood. J Cult Herit 25:149–156CrossRefGoogle Scholar
  4. 4.
    Rowell RM, Barbour RJ (1990) Archaeological wood: properties, chemistry and preservation. American Chemical Society, Washington DCGoogle Scholar
  5. 5.
    Jiachang C, Donglang C, Jingen Z, Xia H, Shenglong C (2009) Shape recovery of collapsed archaeological wood ware with active alkali-urea treatment. J Archaeol Sci 36:434–440CrossRefGoogle Scholar
  6. 6.
    Pearson C (1987) Conservation of marine archaeological objects. Butterworth Co Ltd., LondonGoogle Scholar
  7. 7.
    Reinprecht L (2016) Wood deterioration, protection and maintenance. JohnWiley, United KingdomCrossRefGoogle Scholar
  8. 8.
    Babiński L (2015) Dimensional changes of waterlogged archaeological hardwoods pre-treated with aqueous mixtures of lactitol/trehalose and mannitol/trehalose before freeze-drying. J Cult Herit 16:876–882CrossRefGoogle Scholar
  9. 9.
    Young GS, Wainwright INM (1981) Polyethylene glycol treatments for waterlogged wood at the cell level. In: Proc ICOM-CC Gr Wet Org Archaeol Mater Conf, Ottawa, Canada, pp 107–116Google Scholar
  10. 10.
    Hocker E, Almkvist G, Sahlstedt M (2012) The Vasa experience with polyethylene glycol: a conservator’s perspective. J Cult Herit 13:175–182CrossRefGoogle Scholar
  11. 11.
    Unger A, Schniewind A, Unger W (2001) Conservation of wood artifacts. Springer, BerlinCrossRefGoogle Scholar
  12. 12.
    Horie V (2010) Materials for conservation, organic consolidants, adhesives and coatings. Butterworth-Heinemann, LondonGoogle Scholar
  13. 13.
    Morgós A, Imazu S, Ito K (2015) Sugar conservation of waterlogged wood archaeological finds in the last 30 years. In: Conserv Digit National Maritime Museum in Gdańsk, pp 15–20Google Scholar
  14. 14.
    Babiński L, Fabisiak E, Dąbrowski HP, Kittel P (2017) Study on dimensional stabilization of 12,500-year-old waterlogged subfossil Scots pine wood from the Koźmin Las site, Poland. J Cult Herit 23:119–127CrossRefGoogle Scholar
  15. 15.
    Tahira A (2015) Conservation of archaeological wood using non-reducing sugars. East Carolina University, GreenvilleGoogle Scholar
  16. 16.
    Kawahara Y, Endo R, Kimura T (2002) Conservation treatment for archaeological waterlogged woods using keratin from waste down. J Text Eng 48:107–110CrossRefGoogle Scholar
  17. 17.
    Endo R, Kamei K, Iida I, Kawahara Y (2008) Dimensional stability of waterlogged wood treated with hydrolyzed feather keratin. J Archaeol Sci 35:1240–1246CrossRefGoogle Scholar
  18. 18.
    Endo R, Sugiyama J (2013) Evaluation of cell wall reinforcement in feather keratin-treated waterlogged wood as imaged by synchrotron X-ray microtomography (µ XRT). Holzforschung 67:795–803CrossRefGoogle Scholar
  19. 19.
    Endo R, Hattori T, Tomii M, Sugiyama J (2015) Identification and conservation of a Neolithic polypore. J Cult Herit 16:869–875CrossRefGoogle Scholar
  20. 20.
    Walsh Z, Janeček ER, Jones M, Scherman OA (2017) Natural polymers as alternative consolidants for the preservation of waterlogged archaeological wood. Stud Conserv 62(3):173–183CrossRefGoogle Scholar
  21. 21.
    Mchale E, Steindal CC, Kutzke H, Benneche T, Harding SE (2017) In situ polymerisation of isoeugenol as a green consolidation method for waterlogged archaeological wood. Sci Rep 7:46481.  https://doi.org/10.1038/srep46481 CrossRefPubMedPubMedCentralGoogle Scholar
  22. 22.
    Jensen P, Straetkvern K, Christensen KV, Bak D, Schnell U (2010) Keratin as a bulking and stabilization agent for collapsible waterlogged archaeological wood. In: Proc 11th ICOM-CC Gr Wet Org Archaeol Mater Conf, Greenville, pp 241–227Google Scholar
  23. 23.
    Endo R, Kamei K, Iida I, Yokoyama M, Kawahara Y (2010) Physical and mechanical properties of waterlogged wood treated with hydrolyzed feather keratin. J Archaeol Sci 37:1311–1316CrossRefGoogle Scholar
  24. 24.
    Kawahara Y, Ikegami M, Nakayama A, Tsuda Y, Kenji S, Tsuji M (2009) Transaction morphological studies on assembling behavior of oligopeptides obtained by dissolution of feather keratin with alkali. Sen’i Gakkaishi 65(11):319–323CrossRefGoogle Scholar
  25. 25.
    Babiński L, Izdebska-Mucha D, Waliszewska B (2014) Evaluation of the state of preservation of waterlogged archaeological wood based on its physical properties: Basic density vs. wood substance density. J Archaeol Sci 46:372–383CrossRefGoogle Scholar
  26. 26.
    Endo R, Sugiyama J (2015) Improving the stability of archaeological waterlogged wood by adding multivalent-metal salt process in feather-keratin method. In: Proc Int Symp Wood Sci Technol, Tokyo, Japan, p 31Google Scholar
  27. 27.
    Budgen B (1981) Shrinkage and density of some Australian and South-east Asian timbers. CSIRO, MelbourneGoogle Scholar
  28. 28.
    Unger W, Unger A (1995) On the bioresistance of waterlogged wood impregnated with sucrose. Mater Org 29:231–240Google Scholar

Copyright information

© The Japan Wood Research Society 2018

Authors and Affiliations

  1. 1.Research Institute for Sustainable HumanosphereKyoto UniversityUjiJapan
  2. 2.Nara National Research Institute for Cultural PropertiesNara CityJapan
  3. 3.Toyo Feather Industry Co. Ltd.SagamiharaJapan
  4. 4.College of Materials Science and EngineeringNanjing Forestry UniversityNanjingChina

Personalised recommendations