Abstract
Joints and faults are inherent parts of the rock mass. In the vast majority of mining slopes, discontinuity structures play an important role in slope stability and may trigger a slope failure. The most important step in understanding the slope failure mechanism is to have a reliable model, which shows how all the discontinuity sets are constituted in the rock mass and how they interact with each other. However, building a fracture model is not a straightforward process, since it needs to combine discontinuity information from a variety of sources, such as detailed slope mapping, borehole logging data and remote sensing technologies. Hence, this manuscript attempts to develop a comprehensive structural model of the complete mine area in an open pit, which is the biggest in Norway with respect to its depth and area of coverage. The manuscript demonstrates on how it is possible to consolidate information from different sources in order to identify typical orientation of the detailed fractures that are associated with the main structural lineaments. The process involves analysis of different sources of data in order to correlate this information into useful evidence about the orientation of the fracture systems in terms of dip and dip direction. Further, the mine is divided into different structural domains and a 3D structural model is developed. As an end result, the domains are kinematically tested with respect to different types of failure modes in both overall slope and bench slope scale of the mine for both a hanging wall and foot wall. It is highlighted here that the results presented in this manuscript are the part of the research project called “Decisive Parameters for Open Pit Slopes (DePOPS)”.
Similar content being viewed by others
References
Botsialas K, Mass A (2014) Slope stability conditions at Tellnes open pit mine. A case study and future challenges. Fortschr Mineral vol 5(2014):A53–A72 http://mineralproduksjon.no
Bye AR (2006) The strategic and tactical value of a 3D geotechnical model for mining optimization, Anglo Platinum, Sandsloot open pit. J South Afr Inst Min Metall 106
Bye AR, Bell FG (2001) Stability assessment and slope design at Sandsloot open pit, South Africa. Int J Rock Mech Min Sci 38:449–466
Charlier B, Skår Ø, Korneliussen A, Duchesne JC, Auwera JV (2007) Ilmenite composition in the Tellnes Fe–Ti deposit, SW Norway: fractional crystallization, postcumulus evolution and ilmenite–zircon relation. Contrib Mineral Petrol 154:119–134
Diot H, Bolle O, Lambert J, Launeau P, Duchesne J (2003) The Tellnes ilmenite deposit (Rogaland, South Norway): magnetic and petrofabric evidence for emplacement of a Ti-enriched noritic crystal mush in a fracture zone. J Struct Geol 25:481–501
Duchesne JC (2003) The Rogaland Intrusive Massifs - an excursion guide. Norges geologiske undersøkelse, Trondheim. Report no.: 2001.029
Einstein HH, Veneziano D, Baecher GB, O'Reilly KJ (1983) The effect of discontinuity persistence on rock slope stability. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 20 (5):227-236
Gigli G, Casagli N (2011) Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds. Int J Rock Mech Min Sci 48(2):187–198
Gigli G, Farina P (2016) LiDAR scanning of Tellnes Open Pit. Internal report. 102p
Gigli G, Frodella W, Garfagnoli F, Morelli S, Mugnai F, Menna F, Casagli N (2014) 3-D geomechanical rock mass characterization for the evaluation of rockslide susceptibility scenarios. Landslides. doi:10.1007/s10346-013-0424-2
Haines A, Terbrugge PJ, Carrieri G (1991) Preliminary estimation of rock slope stability using rock mass classification systems. International Society for Rock Mechanics, published in the 7th ISRM Congress
Hanson C, Thomas D, Gallagher B (2005) The value of early geotechnical assessment in mine planning. In: Aziz N (ed) Coal 2005: Coal Operators’ Conference, University of Wollongong and the Australasian Institute of Mining and Metallurgy, pp 17–30
Hormazabal E, Rovira F, Walker M, Carranza-Torres C (2009) Analysis and design of slopes for Rajo Sur, an open pit mine next to the subsidence crater of El Teniente mine in Chile. Slope Stability, Santiago Chile, November 2009
Karlsen TA (1997) Geometry of fracture zones and their influence on the quality at the Tellnes mine, Rogaland. Norges geologiske undersøkelse, Trondheim. Report no.:97.031
Langåker, M.Ø., Gylland, A.S., Jacobsen, K.W., Yri, T. (2015) Tellnes Gruve – Tunnelinspeksjon/Ingeniørgeologisk Kartlegging Av Tunneler. Sweco Norge AS. Internal Report 13711001-R01-A01. 94p
Lee Y, Ryu D-W, Lee H-K (2000) An application of Stereophotogrammetry in investigating rock discontinuity orientation. Geosystem Eng 3(2):71–80. doi:10.1080/12269328.2000.10541154
Marker M, Schiellerup H, Meyer GB, Robins B, Bolle O (2003) The Rogaland Anorthosite Province. Geological map 1:75000. Norges geologiske undersøkelse, Trondheim. Special Publication 9:109–116
Nilsen, B., Ballou, B.J. (2006) Stability problems and rock support at the Tellnes Open Pit Mine, Norway. The South African Institute of Mining and Metallurgy International Symposium of Stability of Rock Slopes, pp 155–165
Pantelidis L (2009) Rock slope stability assessment through rock mass classification systems. Int J Rock Mech Min Sci 46:315–325
Park HJ, West TR (2002) Sampling bias of discontinuity orientation caused by linear sampling technique. Eng Geol 66:99–100
Priest SD, Hudson JA (1981) Estimation of discontinuity spacing and trace length using scanline surveys. Int J Rock Mech Min Sci Geomech 18(3):183–197
Riglar, B., Varga, V. (2014) Final Report on borehole geophysical logging and hydraulic testing in 11 boreholes for Titania AS. Ruden AS. Internal Report. Project numner P109–2014. 275pp
Riquelme AJ, Abellán A, Tomás R (2015) Discontinuity spacing analysis in rock masses using 3D point clouds. Eng Geol 195:185–195
Riquelme AJ, Tomás R, Abellán A (2016) Characterization of rock slopes through slope mass rating using 3D point clouds. Int J Rock Mech Min Sci. doi:10.1016/j.ijrmms.2015.12.008i
Villaescusa E, Brown ET (1992) Maximum likelihood estimation of joint size from trace length measurements. Rock Mech & Rock Eng 25:67–87
Willie DC, Mah CW (2004). Rock slope engineering. Civil and mining, 4th edn. pp 41–42
Yamane T (1967) Statistics: an introductory analysis, 2nd edn. Harper and Row, New York
Zhang L, Einstein HH (2004) Using RQD to estimate the deformation modulus of rock masses. Int J Rock Mech Min Sci 41:337–341
Acknowledgements
The present research is supported by the mining company TITANIA AS and the Research Council of Norway (NFR). The authors are grateful to the management of TITANIA AS for allowing us to use data of the mine and research outcome to be published in this journal. The authors are also grateful to other persons such as Balasz Riglar from Ruden AS for the borehole inspection, Javier Macias and Nghia Trinh at SINTEF for developing the structural database of the boreholes, and Giovanni Gigli and Paolo Farina from GeoApp for providing the LiDAR scanning survey. The authors are grateful for NFR and the management of TITANIA AS for providing the research grant.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Morales, M., Panthi, K.K., Botsialas, K. et al. Development of a 3D structural model of a mine by consolidating different data sources. Bull Eng Geol Environ 78, 35–53 (2019). https://doi.org/10.1007/s10064-017-1068-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-017-1068-6