# A discrete element implementation for concrete: particle generation, contact calculations, packing under gravity and modeling material response

- 54 Downloads

## Abstract

A three-dimensional discrete element modelling capability for concrete based on rigid particles of arbitrary shape and size has been developed. The novel particle generation algorithm allows control of particle size, angularity and flakiness. General rigid body kinematics including finite rotations is accounted for, and an explicit time integration algorithm that conserves energy and momentum is implemented. An efficient contact algorithm with several features to increase the efficiency of the contact computations has been developed. This enables the gravity packing problem for arbitrary shaped particles to be solved in reasonable run time. The proposed procedure is used to generate assemblies of concrete specimens of various sizes that are homogeneous and isotropic in the bulk, and can capture the wall effect due to the formwork. The calibrated specimens are seen to be capable of accurately capturing experimentally observed macro stress strain response and failure patterns. The influence of aggregate shape on texture formation in the packed specimen, and on macro strength and failure patterns in hardened concrete, is demonstrated and is seen to be consistent with experimental results.

## Keywords

Discrete element Concrete Polyhedral particles Angularity Flakiness## Notes

## Compliance with Ethical Standards

## Conflict of Interest

The authors declare that they have no conflict of interest.

## References

- 1.Alexander, M.G., Mindess, S., Diamond, S., Qu, L.: Properties of paste–rock interfaces and their influence on composite behaviour. Mater. Struct.
**9**(28), 497–506 (1995)CrossRefGoogle Scholar - 2.Asahina, D., Landis, E.N., Bolander, J.E.: Modeling of phase interfaces during pre-critical crack growth in concrete. Cement Concr. Compos.
**33**(9), 966–977 (2011)CrossRefGoogle Scholar - 3.Azéma, E., Radjai, F., Saussine, G.: Quasistatic rheology, force transmission and fabric properties of a packing of irregular polyhedral particles. Mech. Mater.
**41**(6), 729–741 (2009)CrossRefGoogle Scholar - 4.Azéma, E., Radjai, F., Dubois, F.: Packings of irregular polyhedral particles: strength, structure, and effects of angularity. Phys. Rev. E
**87**(6), 062203 (2013)CrossRefADSGoogle Scholar - 5.Bachmann, H., et al.: Vibration problems in structures. Birkhäuser Basel, Berlin (1995)CrossRefGoogle Scholar
- 6.Beckmann, B., Schicktanz, K., Reischl, D., Curbach, M.: DEM simulation of concrete fracture and crack evolution. Struct. Concr.
**13**(4), 213–220 (2012)CrossRefGoogle Scholar - 7.Bureau of Indian Standards. IS: 383-1970. Specification for Coarse and Fine Aggregates from Natural sources for Concrete, 2nd ednGoogle Scholar
- 8.Bolander, J.E., Saito, S.: Fracture analyses using spring networks with random geometry. Eng. Fract. Mech.
**61**(5–6), 569–591 (1998)CrossRefGoogle Scholar - 9.Brown, N.J., Chen, J.F., Ooi, J.Y.: A bond model for DEM simulations of cementitious materials and deformable structures. Granul. Matter
**16**(3), 299–311 (2014)CrossRefGoogle Scholar - 10.Camborde, F., Mariotti, C., Donze’, F.V.: Numerical study of rock and concrete behaviour by discrete element modelling. Comput. Geotech.
**27**(4), 225–247 (2000)CrossRefGoogle Scholar - 11.Chang, S.W., Chen, C.S.: A non-iterative derivation of the common plane for contact detection of polyhedral blocks. Int. J. Numer. Methods Eng.
**74**(5), 734–753 (2008)MathSciNetCrossRefMATHGoogle Scholar - 12.Cho, G.C., Dodds, J., Santamarina, J.C.: Particle shape effects on packing density, stiffness, and strength: natural and crushed sands. J. Geotech. Geoenviron. Eng.
**132**(5), 591–602 (2006)CrossRefGoogle Scholar - 13.Cui, L., O’sullivan, C., O’neill, S.: An analysis of the triaxial apparatus using a mixed boundary three-dimensional discrete element model. Geotechnique
**57**(10), 831–844 (2007)CrossRefGoogle Scholar - 14.Cundall, P.A., Strack, O.D.L.: A discrete numerical model for granular assemblies. Geotechnique
**29**(1), 47–65 (1979)CrossRefGoogle Scholar - 15.Cundall, P.A.: Formulation of a three-dimensional distinct element model—Part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks. Int. J. Rock Mech. Min. Sci. Geomech. Abstr.
**25**(3), 107–116 (1988)CrossRefGoogle Scholar - 16.Cusatis, G., Pelessone, D., Mencarelli, A.: Lattice discrete particle model (LDPM) for failure behavior of concrete I: theory. Cement Concr. Compos.
**33**(9), 881–890 (2011)CrossRefGoogle Scholar - 17.Cusatis, G., Mencarelli, A., Pelessone, D., Baylot, J.: Lattice discrete particle model (LDPM) for failure behavior of concrete II: calibration and validation. Cement Concr. Compos.
**33**(9), 891–905 (2011)CrossRefGoogle Scholar - 18.d’Addetta, G.A., Kun, F., Ramm, E.: On the application of a discrete model to the fracture process of cohesive granular materials. Granul. Matter
**4**(2), 77–90 (2002)CrossRefMATHGoogle Scholar - 19.De Josselin, De Jong, G., Verruijt, A.: Etude photo-elastique d’un empilement de disques. Cah. Groupe Fr. Rheol.
**2**(1), 73–86 (1969)Google Scholar - 20.Escoda, J., Jeulin, D., Willot, F., Toulemonde, C.: Three-dimensional morphological modelling of concrete using multiscale Poisson polyhedra. J. Microsc.
**258**(1), 31–48 (2015)CrossRefGoogle Scholar - 21.Golub, G.H., Matt, U.V.: Quadratically constrained least squares and quadratic problems. Numer. Math.
**59**(1), 561–580 (1991)MathSciNetCrossRefMATHGoogle Scholar - 22.Gyurkó, Z., Bagi, K., Borosnyói, A.: Discreteelement modelling of uniaxial compression test of hardened concrete. J. Silic. Based Compos. Mater.
**66**(4), 113–119 (2014)Google Scholar - 23.Hart, R., Cundall, P.A., Lemos, J.: Formulation of a three-dimensional distinct element model—Part II. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks. Int. J. Rock Mech. Min. Sci. Geomech. Abstr.
**25**(3), 117–125 (1988)CrossRefGoogle Scholar - 24.Hentz, S., Daudeville, L., Donzé, F.V.: Identification and validation of a discrete element model for concrete. J. Eng. Mech.
**130**(6), 709–719 (2004)CrossRefGoogle Scholar - 25.Hordijk, D.A.: Local approach to fatigue of concrete. Ph.D Thesis, Delft University of Technology, Delft, The Netherlands (1991)Google Scholar
- 26.Huang, H.: Discrete element modeling of railroad ballast using imaging based aggregate morphology characterization. Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbana, IL (2010)Google Scholar
- 27.Jensen, R.P., Edil, T.B., Bosscher, P.J., Plesha, M.E., Kahla, N.B.: Effect of particle shape on interface behavior of DEM-simulated granular materials. Int. J. Geomech.
**1**(1), 1–19 (2001)CrossRefGoogle Scholar - 28.Jivkov, A.P., Yates, J.R.: Elastic behaviour of a regular lattice for meso-scale modelling of solids. Int. J. Solids Struct.
**49**(22), 3089–3099 (2012)CrossRefGoogle Scholar - 29.Kaplan, M.F.: The effects of the properties of coarse aggregates on the workability of concrete. Mag. Concr. Res.
**10**(29), 63–74 (1958)CrossRefGoogle Scholar - 30.Kim, Y., Souza, L.T.: Effects of aggregate angularity on mix design characteristics and pavement performance. Department of Civil Engineering, University of Nebraska-Lincoln, Technical report; MPM-10 (2009)Google Scholar
- 31.Kumar, C.N.S., Rao, T.D.: Fracture parameters of high strength concrete Mode II testing. Mag. Concr. Res.
**62**(3), 157–162 (2010)CrossRefGoogle Scholar - 32.Lee, H., Kwon, J., Cho, H.: Simulation of impact breakage of concrete blocks using DGB. Geosyst. Eng.
**10**(2), 31–36 (2007)CrossRefGoogle Scholar - 33.Liao, C.L., Chang, T.P., Young, D.H.: Stress–strain relationship for granular materials based on the hypothesis of best fit. Int. J. Solids Struct.
**34**(31–32), 4087–4100 (1997)CrossRefMATHGoogle Scholar - 34.Liu, J.X., Deng, S.C., Zhang, J., Liang, N.G.: Lattice type of fracture model for concrete. Theoret. Appl. Fract. Mech.
**48**(3), 269–284 (2007)CrossRefGoogle Scholar - 35.Lu, M., McDowell, G.R.: The importance of modelling ballast particle shape in the discrete element method. Granul. Matter
**9**(1–2), 69–80 (2007)Google Scholar - 36.Man, H.K., van Mier, J.G.M.: Damage distribution and size effect in numerical concrete from lattice analyses. Cement Concr. Compos.
**33**(9), 867–880 (2011)CrossRefGoogle Scholar - 37.Mechtcherine, V., Shyshko, S.: Simulating the behaviour of fresh concrete with the distinct element method-deriving model parameters related to the yield stress. Cement Concr. Compos.
**55**, 81–90 (2015)CrossRefGoogle Scholar - 38.Meguro, K., Hakuno, M.: Fracture analyses of concrete structures by the modified distinct element method. Struct. Eng. Earthq. Eng.
**6**(2), 283–294 (1989)Google Scholar - 39.Moukarzel, C., Herrmann, H.J.: A vectorizable random lattice. J. Stat. Phys.
**68**(5), 911–923 (1992)MathSciNetCrossRefMATHADSGoogle Scholar - 40.Murdock, L.J.: The workability of concrete. Mag. Concr. Res.
**12**(36), 135–144 (1960)CrossRefGoogle Scholar - 41.Muth, B., Of, G., Eberhard, P., Steinbach, O.: Collision detection for complicated polyhedra using the fast multipole method or ray crossing. Arch. Appl. Mech.
**77**(7), 503–521 (2007)CrossRefMATHADSGoogle Scholar - 42.PFC 3D Version 5, Computer Software: General Purpose distinct element framework. 2014, Itasca Consulting Group, MinneapolisGoogle Scholar
- 43.Potyondy, D., Cundall, P.A., Lee, C.A.: Modelling rock using bonded assemblies of circular particles. In: Proceedings of the Second North American Rock Mechanics Symposium (1996); Montréal, 1937–1944Google Scholar
- 44.Quiroga, P.N., Fowler, D.W.: The effects of aggregates characteristics on the performance of the Portland cement concrete. Report ICAR 104–1F 2003, University of Texas, Austin, TexasGoogle Scholar
- 45.Rao, G.A., Prasad, B.K.R.: Influence of interface properties on fracture behavior of concrete. Sadhana
**36**(2), 193–208 (2011)MathSciNetCrossRefGoogle Scholar - 46.Reinhardt, H.W., Xu, S.: A practical testing approach to determine mode II fracture energy GIIF for concrete. Int. J. Fract.
**105**(2), 107–125 (2000)CrossRefGoogle Scholar - 47.Rocco, C.J., Elices, M.: Effect of aggregate shape on the mechanical properties of a simple concrete. Eng. Fract. Mech.
**76**, 286–298 (2009)CrossRefGoogle Scholar - 48.Rycroft, C.H.: VORO++: a 3D Voronoi cell library in C++. Chaos
**19**, 041111 (2009)CrossRefADSGoogle Scholar - 49.Schlangen, E., Garboczi, E.J.: Fracture simulations of concrete using lattice models: computational aspects. Eng. Fract. Mech.
**57**(2/3), 319–332 (1997)CrossRefGoogle Scholar - 50.Schlangen, E., van Mier, J.G.M.: Experimental and numerical analysis of micro mechanisms of fracture of cement-based composites. Cement Concr. Compos.
**14**(2), 105–118 (1992)CrossRefGoogle Scholar - 51.Sherif, H.A., Kossa, S.S.: Relationship between normal and tangential contact stiffness of nominally flat surface. Wear
**151**, 49–62 (1991)CrossRefGoogle Scholar - 52.Shiu, W.J., Donzé, F., Daudeville, L.: Influence of the reinforcement on penetration and perforation of concrete targets: a discrete element analysis. Eng. Comput.
**26**(1–2), 29–45 (2009)CrossRefMATHGoogle Scholar - 53.Shyshko, S., Mechtcherine, V.: Developing a discrete element model for simulating fresh concrete: experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them. Constr. Build. Mater.
**47**, 601–615 (2013)CrossRefGoogle Scholar - 54.Simo, J.C., Wong, K.K.: Unconditionally stable algorithms for rigid body dynamics that exactly preserve energy and momentum. Int. J. Numer. Methods Eng.
**31**(1), 19–52 (1991)MathSciNetCrossRefMATHGoogle Scholar - 55.Smeets, B., Odenthal, T., Vanmaercke, S., Ramon, H.: Polygon-based contact description for modeling arbitrary polyhedra in the discrete element method. Comput. Methods Appl. Mech. Eng.
**290**, 277–289 (2015)MathSciNetCrossRefADSGoogle Scholar - 56.Su, R.K., Bei, C.: The effect of coarse aggregate size on the stress–strain curves of concrete under uniaxial compression. Hong Kong Inst. Eng. Trans.
**15**(3), 33–39 (2008)Google Scholar - 57.Tavarez, F.A., Plesha, M.E.: Discrete Element method for modelling solid and particulate materials. Int. J. Numer. Methods Eng.
**70**(4), 379–404 (2007)CrossRefMATHGoogle Scholar - 58.Tran, V.T., Donzé, F.V., Marin, P.: A discrete element model of concrete under high triaxial loading. Cement Concr. Compos.
**33**(9), 936–948 (2011)CrossRefGoogle Scholar - 59.Tran, V.D., Uji, K., Ueno, U., Ohno, K., Wang, B.: Evaluation of shear bond test methods of concrete repair. In: Dehn et al.(ed.) Concrete Repair, Rehabilitation and Retrofitting IV. Taylor & Francis Group, London (2016)Google Scholar
- 60.van Mier, J.G.M. et al.: Strain softening in concrete in uniaxial compression. Materials and Structures (1997); RILEM 148-SSC,
**30**, 195–209Google Scholar - 61.van Mier, J.G.M., van Vliet, M.R., Wang, T.K.: Fracture mechanisms in particle composites: statistical aspects in lattice type analysis. Mech. Mater.
**34**(11), 705–724 (2002)CrossRefGoogle Scholar - 62.Van Vliet, M.R.A., van Mier, J.G.M.: Softening behavior of concrete under uniaxial compression. In: Wittmann, F.H. (ed.)Proceedings FracMCos-2: Fracture Mechanics of Concrete Structures. AEDIFICATIO Publishers, Freiburg (1995)Google Scholar
- 63.Van Vliet, M.R.A., van Mier, J.G.M.: Experimental investigation of size effect in concrete and sandstone under uniaxial tension. Eng. Fract. Mech.
**65**(2–3), 165–188 (2000)CrossRefGoogle Scholar - 64.Walton, O.R.: Simulation of gravity flow and packing of spheres. In: Proceedings of the Nisshin Engineering Powder Technology International Seminar (NEPTIS-1), Osaka, Japan (1993)Google Scholar
- 65.Wischers, G., Lusche, M.: Influence of internal stress distribution on the behaviour of normal weight and light weight concrete in compression. Beton-technische Berichte
**8**(22), 343–347 (1972)Google Scholar - 66.Xu, R., Yang, X.H., Yin, A.Y., Yang, S.F., Ye, Y.: A three-dimensional aggregate generation and packing algorithm for modeling asphalt mixture with graded aggregates. J. Mech.
**26**(2), 165–171 (2010)CrossRefGoogle Scholar - 67.Yang, W., Zhou, Z., Pinson, D., Yu, A.: Periodic boundary conditions for discrete element method simulation of particle flow in cylindrical vessels. Ind. Eng. Chem. Res.
**53**(19), 8245–8256 (2014)CrossRefGoogle Scholar - 68.Zhang, D., Huang, X., Zhao, Y.: Algorithms for generating three-dimensional aggregates and asphalt mixture samples by the discrete-element method. J. Comput. Civil Eng.
**27**(2), 111–117 (2013)CrossRefGoogle Scholar - 69.Zhang, M., Morrison, C.N., Jivkov, A.P.: A meso-scale site bond model for elasticity: theory and calibration. Mater. Res. Innov.
**18**(S2), 982–986 (2014)Google Scholar