Abstract
Cylindrical shells are widely used in engineering practice; in particular, one of the special applications is a tire, which can be modeled as a cylindrical shell on an elastic foundation (CSEF). To investigate influences of related parameters on the dynamic characteristics of the shell and help engineers to gain insights into the tire dynamics, a unified formulation for vibration analysis of the cylindrical shell with general boundaries has been developed; this unified formulation includes (i) formulations for CSEF governing equations based on the Donnell–Mushtari theory and Hamilton’s principle; (ii) a unified approach for the solutions of the characteristic equation; and (iii) a general treatment of the boundary conditions by adjusting the foundation spring coefficients. All nine sets of possible solutions of the characteristic equation are clarified and examined. Five case studies have been conducted to validate and verify the developed algorithm. The results based on the developed method generally have good agreement with those of the finite element method and experiment; missed solutions can be recovered.
Similar content being viewed by others
References
Wei, Y., Oertel, C., Liu, Y., et al.: A theoretical model of speed-dependent steering torque for rolling tyres. Vehicle Syst. Dyn. 54(4), 463–473 (2016)
Liu, Z., Zhou, F., Oertel, C., et al.: Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, p. 0954406217720823 (2017)
Warburton, G.B.: Harmonic response of cylindrical shells. ASME Trans. Ser. B J. Eng. Ind. 96, 994–999 (1974)
Li, X.: Analysis and comparative study of static and dynamic characteristics of orthotropic circular cylindrical shells. Ph.D. Dissertation. Huazhong University of Science and Technology, China (2004)
Sheng, J.: The response of a thin cylindrical shell to transient surface loading. AIAA J. 3(4), 701–709 (1965)
Duan, H.: Analysis of dynamic characteristics of thin circular cylindrical shells. Master Dissertation. Northeastern University, China (2012)
Leissa, A.W.: Vibration of Shells. Acoustical Society of America, New York (1993)
Flügge, W.: Stresses in Shells, 2nd edn. Springer, New York (1973)
Christoforou, A.P., Swanson, S.R.: Analysis of simply-supported orthotropic cylindrical shells subject to lateral impact loads. ASME J. Appl. Mech. 57(2), 376–382 (1990)
Jafari, A.A., Khalili, S.M.R., Azarafza, R.: Transient dynamic response of composite circular cylindrical shells under radial impulse load and axial compressive loads. Thin Walled Struct. 43(11), 1763–1786 (2005)
Wang, Y., Luo, Z.: Forced vibration response characteristics of thin cylindrical shell. J. Vib. Shock 34(7), 103–108 (2015)
Luo, Z., Wang, Y., Sun, N., et al.: Forced vibration response calculation of rotating short thin cylindrical shells for various boundary conditions. J. Mech. Eng. 51(9), 64–72 (2015)
Zuo, Y., Gong, Z.: Study on the excited vibration of a cylindrical shell. Trans. Chin. Soc. Agric. Mach. 29(1), 88–93 (1998)
Jin, G., Ye, T., Chen, Y., et al.: An exact solution for the free vibration analysis of laminated composite cylindrical shells with general elastic boundary conditions. Compos. Struct. 106, 114–127 (2013)
Dickinson, S.M.: On the use of simply supported plate functions in Rayleigh’s method applied to the flexural vibration of rectangular plates. J. Sound Vib. 59(1), 143–146 (1978)
Zhou, H., Li, W., Lv, B., et al.: Free vibrations of cylindrical shells with elastic-support boundary conditions. Appl. Acoust. 73(8), 751–756 (2012)
Ilkhani, M.R., Bahrami, A., Hosseini-Hashemi, S.H.: Free vibrations of thin rectangular nano-plates using wave propagation approach. Appl. Math. Model. 40(2), 1287–1299 (2016)
Li, X., Wang, Z., Huang, L.: Study of vibration characteristics for orthotropic circular cylindrical shells using wave propagation approach and multivariate analysis. Meccanica 52(10), 2349–2361 (2017)
Ma, X., Du, J., Yang, T., et al.: Analysis of influence of boundary conditions on cylindrical shell dynamics based on wave propagation approach. J. Vib. Eng. 22(6), 608–613 (2009)
Shah, A.G., Mahmood, T., Naeem, M.N., et al.: Vibrations of functionally graded cylindrical shells based on elastic foundations. Acta Mech. 211(3), 293–307 (2010)
Shah, A.G., Mahmood, T., Naeem, M.N., et al.: Vibration characteristics of fluid-filled cylindrical shells based on elastic foundations. Acta Mech. 216(1–4), 17–28 (2011)
Li, X.: Study on free vibration analysis of circular cylindrical shells using wave propagation. J. Sound Vib. 311(3), 667–682 (2008)
Smith, B.L., Vronay, D.F.: Free vibration of circular cylindrical shells of finite length. AIAA J. 8(3), 601–603 (1970)
Soedel, W.: Simplified equations and solutions for the vibration of orthotropic cylindrical shells. J. Sound Vib. 87(4), 555–566 (1983)
Alujević, N., Campillo-Davo, N., Kindt, P., et al.: A simplified tire model based on a rotating shell. In: Proceedings of the 4th International Tyre Colloquium, pp. 383–392 (2015)
Kearfott, R.B.: Some tests of generalized bisection. ACM Trans. Math. Softw. (TOMS) 13(3), 197–220 (1987)
Bartmann, D.: A method of bisection for discounted Markov decision problems. Zeitschrift für Oper. Res. 23(7), 275–287 (1979)
Kelley, C.T.: Iterative Methods for Optimization. Society for Industrial and Applied Mathematics, Philadelphia (1999)
Karczub, D.G.: Expressions for direct evaluation of wave number in cylindrical shell vibration studies using the Flügge equations of motion. J. Acoust. Soc. Am. 119(6), 3553–3557 (2006)
Sewall, J.L., Naumann, E.C.: An experimental and analytical vibration study of thin cylindrical shells with and without longitudinal stiffeners. In: National Aeronautic and Space Administration; for Sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va (1968)
Warburton, G.B., Soni, S.R.: Resonant response of orthotropic cylindrical shells. J. Sound Vib. 53, 1–23 (1977)
Riepl, A., Reinalter, W., Schmid, M.: Application of the tyre model FTire in the vehicle development process at MAGNA STEYR Fahrzeugtechnik. Veh. Syst. Dyn. 43(sup1), 370–383 (2005)
Lugner, P., Plöchl, M.: Tyre model performance test: first experiences and results. Veh. Syst. Dyn. 43(sup1), 48–62 (2005)
Gipser, M.: FTire: a physically based application-oriented tyre model for use with detailed MBS and finite-element suspension models. Veh. Syst. Dyn. 43(sup1), 76–91 (2005)
Li, X.: A new approach for free vibration analysis of thin circular cylindrical shell. J. Sound Vib. 296(1), 91–98 (2006)
Gan, L., Li, X., Zhang, Z.: Free vibration analysis of ring-stiffened cylindrical shells using wave propagation approach. J. Sound Vib. 326(3), 633–646 (2009)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Yang, Y., Wei, Y. A unified approach for the vibration analysis of cylindrical shells with general boundary conditions. Acta Mech 229, 3693–3713 (2018). https://doi.org/10.1007/s00707-018-2193-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-018-2193-4