Abstract
Tourette syndrome (TS) is an inherited neurophysiologic disorder with onset in childhood, characterized by multiple physical (motor) tics and at least one vocal (phonic) tic. Patients with TS constantly feel immense anxiety in public due to the issues of vocal tics or coprolalia. Therefore, this study aims to design a specialized mask for TS patients to reduce the intensity of vocal tic or coprolalia such that the quality of life can be greatly improved. The paper presents a novel concept of sound absorption using 3d-printed acoustic metamaterials (AMs) with microscale gaps as the impedance-matched surface and experimental study on sound transmission loss. A simple construction based on the acoustically impedance matched surface embedded with asymmetric metallic platelets, hybrid resonances with high energy dissipation can be confined and absorb low-frequency airborne sound in frequencies ranging from 10 to 1300 Hz. The octave band analysis on the samples sound suppression capability is discussed. The field test results revealed an effective sound suppression capability can be fulfilled in the range of 89–94% for the frequency range 10–1300 Hz. The sound absorption performances of customized mask are shown to be effective and the prototypes had been clinically tested on the patients of TS. An alternative low-cost, impedance-matched AMs structure for the patients of TS is successfully developed.
Similar content being viewed by others
References
Bujoreanu C, Nedeff F, Benchea M, Agop M (2017) Experimental and theoretical considerations on sound absorption performance of waste materials including the effect of backing plates. Appl Acoust 119:88–93
Du Y, Yan N, Kortschot MT (2014) A simplified fabrication process for biofiber-reinforced polymer composites for automotive interior trim applications. J Mater Sci 49:2630–2639
Freeman RD, Zinner SH, Müller-Vahl KR et al (2009) Coprophenomena in Tourette syndrome. Dev Med Child Neurol 51(3):218–227
He Y, Zhou Y, Liu Z, Liew KM (2017) Pattern transformation of single-material and composite periodic cellular structures. Mater Des 132:375–384
Jayaraman KA (2005) Acoustical absorptive properties of nonwovens. North Carolina State University, M.S. thesis
Jiang S, Xu Y, Zhang H, White CB, Yan X (2012) Seven-hole hollow polyester fibers as reinforcement in sound absorption chlorinated polyethylene composites. Appl Acoust 73:243–247
Jing T, Heng Q (2017) Dual-directionally tunable metamaterial for low-frequency vibration isolation. Appl Phys Lett 110:021907
Kücük M, Korkmaz Y (2012) The effect of physical parameters on sound absorption properties of natural fiber mixed nonwoven composites. Text Res J 82:2043–2053
Lee YE, Joo CW (2004) Sound Absorption Properties of thermally bonded nonwovens based on composing fibers and production parameters. J Appl Polym Sci 92:2295–2302
Liao CC, Hsueh CW, Zhong TY, Hsu CC, Fuh YK (2018) Multiple vibrating plates of sound suppression mask for minimizing tics impulse acoustics of Tourette’s patients. Appl Acoust 129:27–35
Lu Z, Shrestha M, Lau GK (2017) Electrically tunable and broader-band sound absorption by using micro-perforated dielectric elastomer actuator. Appl Phys Lett 110:182901
Ma G, Yang M, Xiao S, Yang Z, Sheng P (2014) Acoustic metasurface with hybrid resonances. Nat Mater 13:873–878
Manning J, Panneton R (2013) Acoustical model for shoddy-based fiber sound absorbers. Text Res J 83:1356–1370
Mei J, Ma G, Yang M, Wen W, Sheng P (2012) Dark acoustic metamaterials as super absorbers for low-frequency sound. Nat Commun 3:756
Na Y, Lancaster J, Casali J, Cho G (2007) Sound absorption coefficients of micro-fiber fabrics by reverberation room method. Text Res J 77:330–335
Na Y, Agnhage T, Cho G (2012) Sound absorption of multiple layers of nanofiber webs and the comparison of measuring methods for sound absorption coefficients. Fiber Polym 13:1348–1352
Or KH, Putra A, Selamat MZ (2017) Oil palm empty fruit bunch fibres as sustainable acoustic absorber. Appl Acoust 119:9–16
Pegoretti TDS, Mathieux F, Evrard D, Brissaud D, Arruda JRDF (2014) Use of recycled natural fibres in industrial products: a comparative LCA case study on acoustic components in the Brazilian automotive sector. Resour Conserv Recycl 84:1–14
Scahill L, Specht M, Page C (2014) The prevalence of tic disorders and clinical characteristics in children. J Obsessive Compuls Relat Disord 3:394–400
Scott BL, Jankovic J, Donavon DT (1996) Botulinium toxin injection into vocal cord in the treatment of malignant coprolalia associated with Tourette’s syndrome. Mov Disord 11:431–433
Shoshani Y, Yakubov Y (1999) A model for calculating the noise absorption capacity of nonwoven fiber webs. Text Res J 69:519–526
Song GY, Cheng Q, Huang B, Dong HY, Cui TJ (2016) Broadband fractal acoustic metamaterials for low-frequency sound attenuation. Appl Phys Lett 109:131901
Starkey TA, Smith JD, Hibbins AP, Sambles JR, Rance HJ (2017) Thin structured rigid body for acoustic absorption. Appl Phys Lett 110:041902
Tadeu A, António J, Mateus D (2004) Sound insulation provided by single and double panel walls—a comparison of analytical solutions versus experimental results. Appl Acoust 65:15–29
Yang Z, Dai HM, Chan NH, Ma GC, Sheng P (2010) Acoustic metamaterial panels for sound attenuation in the 50–1000 Hz regime. Appl Phys Lett 96:041906
Yuan S, Shen F, Bai J, Chua CK, Wei J, Zhou K (2017) 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization. Mater Des 120:317–327
Zhang HL, Zhu YF, Liang B, Yang J, Yang J, Cheng JC (2017) Sound insulation in a hollow pipe with subwavelength thickness. Sci Rep 7:44106
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Hsueh, CW., Liao, CC., Zhong, TY. et al. 3D printed acoustic metamaterials with microscale gaps as sound-absorbing mask for the patients of Tourette syndrome. Microsyst Technol 25, 551–559 (2019). https://doi.org/10.1007/s00542-018-4020-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-018-4020-1