Effect of fineness ratios of 0.75–2.0 on aerodynamic drag of freestream-aligned circular cylinders measured using a magnetic suspension and balance system
The drag coefficients of freestream-aligned circular cylinders of fineness ratios of 0.75–2.0 were investigated with a magnetic suspension and balance system (MSBS). The objective was to find the critical geometry, that is, the fineness ratio at which the drag coefficient becomes the local maximum within this ratio range. The experiments were conducted using the 1-m MSBS at the low turbulence wind tunnel at the Institute of Fluid Science, Tohoku University. The drag and base pressure coefficients of various cylinders were measured. The freestream velocity was varied to produce flows with Reynolds numbers ranging from \(0.6\times 10^5\) to \(1.0\times 10^5\). The drag coefficient monotonically decreases as the fineness ratio increases and no critical geometry or local maximum of the drag coefficient is found in the range we investigated. The base pressure coefficient decreases as the fineness ratio increases. The temporal fluctuations of the base pressure of the models with fineness ratios of 0.75, 1.0, and 1.2 are approximately twice as large as that of the model with a ratio of 2.0. The relationship between the fineness ratio and the drag coefficient is similar to that between the fineness ratio and the base pressure coefficient, similar to the findings of previous studies of two-dimensional bodies.
This work was supported by JSPS KAKENHI Grant number 16H04582.
- Bearman P, Trueman D (1972) An investigation of the flow around rectangular cylinders. Aeronaut Q 23(3):229–237Google Scholar
- Bergh H, Tijdeman H (1965) Theoretical and experimental results for the dynamic response of pressure measuring systems. TR F.238, Nationaal Lucht-en RuimtevaartlaboratoriumGoogle Scholar
- Eiffel G (1907) Recherches expérimentales sur la résistance de l’Air exécutées à la tour eiffel. L Maretheux, Paris, France (in French)Google Scholar
- GtbJCH Eiffel (1913) The resistance of the air and aviation. Constable Co, Houghton, Mifflin & Co, LondonGoogle Scholar
- Elger DF, Roberson JA (2013) Engineering fluid mechanics. Wiley, HobokenGoogle Scholar
- Fukata K (2017) Development and demonstration of base-pressure telemetry system for magnetic suspension and balance system (in Japanese). Master’s thesis, Tohoku UniversityGoogle Scholar
- Hoerner SF (1965) Fluid-dynamic drag: practical information on aerodynamic drag and hydrodynamic resistance, 2nd edn. AlbuquerqueGoogle Scholar
- Maskell E (1965) A theory of the blockage effects on bluff bodies and stalled wings in a closed wind tunnel. R&M 3400, Aeronautical Research Council, London (United Kingdom)Google Scholar
- Nakaguchi H (1968) An experimental study on aerodynamic drag of rectangular cylinders. J Jpn Aeronaut Space Sci (in Jpn) 16:1–5Google Scholar
- Nakaguchi H (1978) Recent Japanese research on three-dimensional bluff-body flows relevant to road-vehicle aerodynamics. In: Sovran G et al (eds) Aerodynamic drag mechanisms of bluff bodies and road vehicles. Plenum Press, New York, pp 227–246Google Scholar
- Prosser DT, Smith MJ (2015) Aerodynamics of finite cylinders in quasi-steady flow. In: AIAA2015-1931Google Scholar
- Roberson JA, Lin CY, Rutherford SG, Stine MD (1972) Turbulence effects on drag of sharp-edged bodies. J Hydraul Div 98(7):1187–1203Google Scholar
- Sawada H, Obayashi S (2015) A new 1-m magnetic suspension and balance system for the low turbulence wind tunnel at IFS. In: Proceedings of thirteenth international conference on flow dynamicsGoogle Scholar