Abstract
In this work, different contents (10–40 wt%) of poly(butylene succinate) (PBS) were introduced into poly(lactic acid) (PLA) through the common melt compounding processing. The microstructure and morphologies of the blends were investigated through differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and scanning electron microscope (SEM). The results showed that the presence of PBS neither induces the crystallization nor enhances the crystallinity of PLA matrix, and completely amorphous PLA was obtained in all samples. PBS exhibited dispersed particles in the PLA matrix and there were clear gaps between components. The hydrophilicity of samples was evaluated by measuring contact angles. The results demonstrated that adding PBS improved the hydrophilicity of samples. The hydrolytic degradation measurements were carried out at 37 °C in alkaline solution. The results showed that the presence of PBS accelerated the hydrolytic degradation of PLA matrix. Specifically, the higher the content of PBS was, the bigger the weight loss per unit area of sample was. The hydrolytic degradation mechanism was then analyzed.
Similar content being viewed by others
References
Hoglund A, Hakkarainen M, Edlund U, Albertsson AC (2009) Surface modification changes the degradation process and degradation product pattern of polylactide. Langmuir 26:378–383
Tsuji H, Tezuka Y, Yamada K (2005) Alkaline and enzymatic degradation of l-lactide copolymers. II. Crystallized films of poly(l-lactide-co-d-lactide) and poly(l-lactide) with similar crystallinities. J Polym Sci Part B Polym Phys 43:1064–1075
Li SM, Tenon M, Garreau H, Braud C, Vert M (2000) Enzymatic degradation of stereocopolymers derived from l-, dl- and meso-lactides. Polym Degrad Stab 67:85–90
Liu L, Li SM, Garreau H, Vert M (2000) Selective enzymatic degradations of Poly(l-lactide) and poly(ε-caprolactone) blend films. Biomacromolecules 1:350–359
Saha SK, Tsuji H (2006) Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s. Polym Degrad Stab 91:1665–1673
Ray SS, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50:962–1079
Fukuzaki H, Yoshida M, Asano M, Kumakura M (1989) Synthesis of copoly(d,l-lactic acid) with relative low molecular weight and in vitro degradation. Eur Polym J 25:1019–1026
Zhou Q, Xanthos M (2008) Nanoclay and crystallinity effects on the hydrolytic degradation of polylactides. Polym Degrad Stab 93:1450–1459
Gorrasi G, Pantani R (2013) Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: assessment of structural modification and kinetic parameters. Polym Degrad Stab 98:1006–1014
Pantani R, Sorrentino A (2013) Influence of crystallinity on the biodegradation rate of injection-moulded poly(lactic acid) samples in controlled composting conditions. Polym Degrad Stab 98:1089–1096
Li SM, Garreau H, Vert M (1990) Structure-property relationships in the case of the degradation of massive poly(a-hydroxy acid) in aqueous media Part 3 influence of the morphology of poly(l-lactic acid). J Mater Sci Mater Med 1:198–206
Vert M, Li SM, Garreau H (1994) Attempts to map the structure and degradation characteristics of aliphatic polyesters derived from lactic and glycolic acid. J Biomater Sci Polym Edn 6:639–649
Tsuji H, Ikada Y (1998) Properties and morphology of poly(L-lactide). II. Hydrolysis in alkaline solution. J Polym Sci Part A Polym Chem 36:59–66
Tsuji H, Mizuno A, Ikada Y (2000) Properties and morphology of poly(l-lactide). III. Effects of initial crystallininty on long-term in vitro hydrolysis of high molecular weight poly(l-lactide) film in phosphate-buffered solution. J Appl Polym Sci 77:1452–1464
Tsuji H, Nakahara K, Ikarashi K (2001) Poly(l-lactide), 8—high temperature hydrolysis of poly(l-lactide) films with different crystallinities and crystalline thicknesses in phosphate-buffered solution. Macromol Mater Eng 286:398–406
Andersson SR, Hakkarainen M, Inkinen S (2010) Customizing the hydrolytic degradation rate of stereocomplex PLA through different PDLA architectures. Biomacromolecules 13:1212–1222
Chung S (1995) Chain-end scission in acid catalyzed hydrolysis polylactide in solution. J Control Release 34:9–15
Xu L, Crawford K, Gorman C (2011) Effects of temperature and pH on the degradation of poly(lactic acid) brushes. Macromolecules 44:4777–4782
Fukushima K, Tabuani D, Dottori M, Armentano I, Kenny JM, Gamino G (2011) Effect of temperature and nanoparticle type on hydrolytic degradation of poly(lactic acid) nano- composites. Polym Degrad Stab 96:2120–2129
Tsuji H, Nakahara K (2002) Poly(l-lactide). IX. Hydrolysis in acid media. J Appl Polym Sci 86:186–194
Tsuji H, Ikarashi K (2004) In vitro hydrolysis of poly(l-lactide) crystalline residues as extended- chain crystallites. III. Effect of pH and enzyme. Polym Degrad Stab 85:647–656
Tsuji H, Shimizu K, Sato Y (2012) Hydrolytic degradation of poly(l-lactic acid): combined effects of UV Treatment and crystallization. J Appl Polym Sci 125:2394–2406
Picard E, Espuche E, Fulchiron R (2011) Effect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties. Appl Clay Sci 53:58–65
Shieh YT, Twu YK, Su CC, Lin RH, Liu GL (2010) Crystallization Kinetics Study of Poly(l-lactic acid)/Carbon Nanotubes Nanocomposites. J Polym Sci Part B: Polym Phys 48:983–989
Shieh YT, Liu GL, Twu YK, Wang TL, Yang CH (2010) Effects of carbon nanotubes on dynamic mechanical property, thermal property, and crystal structure of poly(l-lactic acid). J Polym Sci Part B Polym Phys 48:145–152
Zhao YY, Qiu ZB, Yang WT (2008) Effect of functionalization of multiwalled nanotubes on the crystallization and hydrolytic degradation of biodegradable poly(l-lactide). J Phys Chem B 112:16461–16468
Zhao YY, Qiu ZB, Yang WT (2009) Effect of multi-walled carbon nanotubes on the crystallization and hydrolytic degradation of biodegradable poly(l-lactide). Compos Sci Technol 69:627–632
Xu HS, Dai XJJ, Lamb PR, Li ZM (2009) Poly(l-lactide) crystallization induced by multiwall carbon nanotubes at very low loading. J Polym Sci Part B Polym Phys 47:2341–2352
Suksut B, Deeprasertkul C (2011) Effect of nucleating agent on physical properties of poly(lactic acid) and its blend with natural rubber. J Polym Environ 19:288–296
Jiang L, Zhang JW, Wolcott MP (2007) Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: reinforcing effects and toughening mechanisms. Polymer 48:7632–7644
Wu DF, Wu L, Zhou WD, Sun YR, Zhang M (2010) Relations between the aspect ratio of carbon nanotubes and the formation of percolation networks in biodegradable polylactide/carbon nanotube composites. J Polym Sci Part B Polym Phys 48:479–489
Yoon JT, Jeong YG, Lee SC, Min BG (2009) Influences of poly(lactic acid)-grafted carbon nanotube on thermal, mechanical and electrical properties of poly(lactic acid). Polym Adv Technol 20:20631–20638
Ramontja J, Ray SS, Pillai SK, Luyt AS (2009) High-performance carbon nanotube-reinforced bioplastic. Macromol Mater Eng 294:839–846
Luo YB, Li WD, Wang XL, Xu DY, Wang YZ (2009) Preparation and properties of nanocomposites based on poly(lactic acid) and functionalized TiO2. Acta Mater 57:3182–3191
Huang JW, Hung YC, Wen YL, Kang CC, Yeh MY (2009) Polylactide/nano- and micro-scale silica composite films. I. Preparation and characterization. J Appl Polym Sci 112:1688–1694
Kim HS, Chae YS II, Kwon H, Yoon JS (2009) Thermal degradation behavior of multi-walled carbon nanotube-reinforced poly(l-lactide) nanocomposites. Polym Int 58:826–831
Huang JW, Hung YC, Wen YL, Kang CC, Yeh MY (2009) Polylactide/nano- and micro-scale silica composite films. II. Melting behavior and cold crystallization. J Appl Polym Sci 112:3149–3156
Huang TC, Yeh JM, Yang JC (2010) Effect of silica size on the thermal, mechanical and biodegradable properties of polylactide/silica composite material prepared by melt blending. Adv Mater Res 123–125:1215–1218
Yan SF, Yin JB, Yang JY, Chen XS (2007) Structural characteristics and thermal properties of plasticized poly(l-lactide)-silica nanocomposites synthesized by sol-gel method. Mater Lett 61:2683–2686
Zhang J, Lou JZ, Ilias S, Krishnamachari P, Yan JZ (2008) Thermal properties of poly(lactic acid)/fumed silica nanocomposites: experiments and molecular dynamics simulations. Polymer 49:2381–2386
Luo YB, Wang XL, Wang YZ (2012) Effect of TiO2 nanoparticles on the long-term hydrolytic degradation behavior of PLA. Polym Degrad Stab 97:721–728
Qu M, Tu HL, Amarante M, Song YQ, Zhu SS (2014) Zinc oxide nanoparticles catalyze rapid hydrolysis of poly(lactic acid) at low temperatures. J Appl Polym Sci 131:40287–40293
Chen HM, Wang YP, Chen J, Yang JH, Zhang N, Huang T, Wang Y (2013) Hydrolytic degradation behavior of poly(l-lactide)/SiO2 composites. Polym Degrad Stab 98:2672–2679
Flahiff CM, Blackwell AS, Hollis JM, Feldman DS (1996) Analysis of a biodegradable composite for bone healing. J Biomed Mater Res 32:419–424
He LH, Sun J, Wang XX, Fan XH, Zhao QL, Cai LF, Song R, Ma Z, Huang W (2012) Unzipped multiwalled carbon nanotubes-incorporated poly(l-lactide) nanocomposites with enhanced interface and hydrolytic degradation. Mater Chem Phys 134:1059–1066
Chen HM, Feng CX, Zhang WB, Yang JH, Huang T, Zhang N, Wang Y (2013) Hydrolytic degradation behavior of poly(l-lactide)/carbon nanotubes nanocomposites. Polym Degrad Stab 98:198–208
de Paula EL, Mano V, Pereira FV (2011) Influence of cellulose nanowhiskers on the hydrolytic degradation behavior of poly(d , l-lactide). Polym Degrad Stab 96:1631–1638
Paul MA, Delcourt C, Alexandre M, Degée Ph, Monteverde F, Dubois Ph (2005) Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation. Polym Degrad Stab 87:535–542
Roy PK, Hakkarainen M, Albertsson AC (2010) Nanoclay effects on the degradation process and product patterns of polylactide. Polym Degrad Stab 97:1254–1260
Chen HM, Chen JW, Chen J, Yang JH, Huang T, Zhang N, Wang Y (2012) Effect of organic montmorillonite on cold crystallization and hydrolytic degradation of poly(l-lactide). Polym Degrad Stab 97:2273–2283
Eili M, Shameli K, Ibrahim NA, Yunus WMZW (2012) Degradability enhancement of poly(lactic acid) by stearate-Zn3Al LDH Nanolayers. Int J Mol Sci 13:7938–7951
Shi YY, Du XC, Yang JH, Huang T, Zhang N, Wang Y, Yuan GP, Zhang CL (2014) Super toughened poly(l-lactide)/thermoplastic polyurethane blends achieved by adding dicumyl peroxide. Polym Plast Technol Eng 53:1344–1353
Li YJ, Shimizu H (2009) Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene (ABS): morphology and properties. Eur Polym J 42:738–746
Kumar M, Mohanty S, Nayak SK, Parvaiz MR (2010) Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites. Bioresour Technol 101:8406–8415
Al-ltry Lamnawar K, Maazouz A (2012) Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy. Polym Degrad Stab 97:1898–1914
Boufarguine M, Guinault A, Miquelard-Garnier G, Sollogoub C (2013) PLA/PHBV films with improved mechanical and gas barrier properties. Macromol Mater Eng 98:1065–1073
Nameroff TJ, Garant RJ, Albert MB (2004) Adoption of green chemistry: an analysis based on US patents. Res Policy 33:959–974
Oyama HT, Tanaka Y, Kadosaka A (2009) Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide). Polym Degrad Stab 94:1419–1426
Shirahase T, Komatsu Y, Marubayashi H, Tominaga Y, Asai S, Sumita M (2007) Miscibility and hydrolytic degradation in alkaline solution of poly(l-lactide) and poly(p-vinyl phenol) blends. Polym Degrad Stab 92:1626–1631
Tsuji H, Muramatsu H (2001) Blends of aliphatic polyesters: V Non-enzymatic and enzymatic hydrolysis of blends from hydrophobic poly(l-lactide) and hydrophilic poly(vinyl alcohol). Polym Degrad Stab 71:403–413
Huang Y, Ge FJ, Zhou YL, Jiang L, Dan Y (2014) Hydrolytic behavior of poly(lactic acid) films with different architecture modified by poly(dodecafluorheptyl methylacrylate). Eur Polym J 59:189–199
Ojijo V, Ray SS, Sadiku R (2013) Toughening of Biodegradable polylactide/poly(butylene succinate-co-adipate) blends via in situ reactive compatibilization. ACS Appl Mater Inter 5:4266–4276
Shibata M, Inoue Y, Miyoshi M (2006) Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly (butylene succinate). Polymer 47:3557–3564
Papageorgiou DG, Chrissafis K, Pavlidou E, Deliyanni EA, Papageorgiou GZ, Terzopoulou Z, Bikiaris DN (2014) Effect of nanofiller’s size and shape on the solid state microstructure and thermal properties of poly(butylene succinate) nanocomposites. Thermochim Acta 590:181–190
Aleman C, Lotz B, Puiggali J (2001) Crystal structure of the alpha-form of poly(l-lactide). Macromolecules 34:4795–4801
Sasaki S, Asakura T (2003) Helix distortion and crystal structure of the alpha-form of poly(l-lactide). Macromolecules 36:8385–8390
Wang RY, Wang SF, Zhang Y, Wan CY, Ma PM (2009) Toughening modification of PLLA/PBS blends via In Situ compatibilization. Polym Eng Sci 49:26–33
Cho K, Lee J, Kwon K (2001) Hydrolytic degradation behavior of poly(butylene succinate)s with different crystalline morphologies. J Appl Polym Sci 79:1025–1033
Tsuji H, Ikarashi K, Fukuda N (2004) Poly(l-lactide): XII. Formation, growth, and morphology of crystalline residues as extended-chain crystallites through hydrolysis of poly(l-lactide) films in phosphate-buffered solution. Polym Degrad Stab 84:515–523
Acknowledgments
Authors express their sincere thanks to the National Natural Science Foundation of China (51473137) for financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Yp., Xiao, Yj., Duan, J. et al. Accelerated hydrolytic degradation of poly(lactic acid) achieved by adding poly(butylene succinate). Polym. Bull. 73, 1067–1083 (2016). https://doi.org/10.1007/s00289-015-1535-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-015-1535-9