Abstract
Completely exfoliated epoxy/clay nanocomposites with comprehensive high performance were successfully prepared using Nano-disassembling method. In this method, nano-SiO2 was added into the montmorillonite and epoxy mixture system as disassembler to interact with montmorillonite (MMT). By means of the strong interaction between nanoscale particles, the MMT layers were completely disassembled into elemental nanometric mono-platelets. These mono-platelets took interlacing arrangement with the disassembler particles in the resultant nanocomposites. Mechanical testing and thermal analysis results indicated that the epoxy/MMT nanocomposites prepared by the Nano-disassembling method displayed dramatic improvements in multiple properties over conventional epoxy/organo-MMT nanocomposites. At the optimal MMT content of 5 phr, tensile modulus and tensile strength increased by 64.2 and 52.3%, respectively. Flexural modulus enhanced by 7.1%, flexural strength by 14.6% and notch impact strength by 37.7%. Glass transition temperature and thermal decomposition temperature moved to higher temperatures by 10.1 and 5.7 °C, respectively.
Similar content being viewed by others
References
Nam BU, Son Y (2010) Evaluations of PP-g-GMA and PP-g-HEMA as a compatibilizer for polypropylene/clay nanocomposites. Polym Bull 65:837–847
García-López D, Gobernado-Mitre I, Merino JC et al (2009) Properties of polyamide 6/clay nanocomposites processed by low cost bentonite and different organic modifiers. Polym Bull 62:791–800
Okada A, Usuki A (2006) Twenty years of polymer-clay nanocomposites. Macromol Mater Eng 291:1449–1476
Koo CM, Kim SO, Chung IJ (2003) Study on morphology evolution, orientational behavior, and anisotropic phase formation of highly filled polymer-layered silicate nanocomposites. Macromolecules 36:2748–2757
Wang L, Wang K, Chen L et al (2006) Preparation, morphology and thermal/mechanical properties of epoxy/nanoclay composite. Composites A 37:1890–1896
Wang K, Wang L, Wu JS et al (2005) Preparation of highly exfoliated epoxy/clay nanocomposites by “slurry compounding”: process and mechanisms. Langmuir 21:3613–3618
Becker O, Cheng YB, Varley RJ, Simon GP (2003) Layered silicate nanocomposites based on various high-functionality epoxy resins: the influence of cure temperature on morphology, mechanical properties and free volume. Macromolecules 36:1616–1625
Bishop KJM, Wilmer CE, Soh S, Grzybowski BA (2009) Nanoscale forces and their uses in self-assembly. Small 14:1600–1630
Pluart LL, Duchet J, Sautereau H (2005) Epoxy/montmorillonite nanocomposites: influence of organophilic treatment on reactivity, morphology and fracture properties. Polymer 46:12267–12278
Guo BC, Jia DM, Cai CG (2004) Effects of organo-montmorillonite dispersion on thermal stability of epoxy resin nanocomposites. Eur Polym J 40:1743–1748
Liu HZ, Zhang WA, Zheng SX (2005) Montmorillonite intercalated by ammonium of octaaminopropyl polyhedral oligomeric silsesquioxane and its nanocomposites with epoxy resin. Polymer 46:157–165
Wang ZC, Xu CL, Zhao YQ et al (2008) Fabrication and mechanical properties of exfoliated clay–CNTs/epoxy nanocomposites. Mater Sci Eng A 490:481–487
Wang JW, Qin SC (2007) Study on the thermal and mechanical properties of epoxy–nanoclay composites: the effect of ultrasonic stirring time. Mater Lett 61:4222–4224
Gao F (2004) Clay/polymer composites: the story. Mater Today 7:50–55
Liu WP, Hoa SV, Pugh M (2005) Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocomposites. Compos Sci Technol 65:2364–2373
Lakshmi MS, Narmadha B, Reddy BSR (2008) Enhanced thermal stability and structural characteristics of different MMT-clay/epoxy-nanocomposite materials. Polym Degrad Stab 93:201–213
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, X., Zhan, Z., Peng, G. et al. A new method for preparing completely exfoliated epoxy/clay nanocomposites: nano-disassembling method. Polym. Bull. 67, 719–727 (2011). https://doi.org/10.1007/s00289-011-0496-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-011-0496-x