Skip to main content
Log in

A 2D curvilinear coupled surface–subsurface flow model for simulation of basin/border irrigation: theory, validation and application

  • Original Paper
  • Published:
Irrigation Science Aims and scope Submit manuscript

Abstract

Despite the development of pressurized irrigation systems in the second half of the twentieth century, surface irrigation continues to be the most used system in the world. Computer tools are required to support performance improvements leading to its sustainability. A simulation model of basin/border irrigation is presented in this paper combining two-dimensional overland hydraulics based on Saint–Venant equations with three-dimensional infiltration based on the mixed form of Richards’ equation. The coupling of these equations is attained by enforcing continuity of pressure at the soil surface. The model applies a finite-volume approach using the diffusion-wave approximation form of the shallow water equations. Water flow on undulated topographies is simulated using a non-orthogonal curvilinear coordinate system. An underrelaxed-modified Picard iteration algorithm is used for Richards’ equation, and an underrelaxed Picard iteration algorithm is used for Saint–Venant equations. The model was validated using experiments from the literature. Model performance was robust and accurate, even in complex theoretical cases with strong soil-surface undulations. Mass conservation was judged satisfactory in all cases, with the long-term ratio of mass balance error in the order of 10−2 in the most complex simulations. Soil type, mesh non-orthogonality, and the interaction of these variables had a strong effect on CPU time. Additional research will be required to transform this simulation model into an operational tool for surface irrigation. Attention will need to be paid to additional surface irrigation systems, soil types, and the optimization of computational speed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ali Naghi Ziaei.

Additional information

Communicated by E. Bautista.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Naghedifar, S.M., Ziaei, A.N., Playán, E. et al. A 2D curvilinear coupled surface–subsurface flow model for simulation of basin/border irrigation: theory, validation and application. Irrig Sci 37, 151–168 (2019). https://doi.org/10.1007/s00271-018-0609-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00271-018-0609-5

Navigation