The Impact of Waste Paper Recycling on the Carbon Emissions from China’s Paper Industry


As China’s demand for paper products increases, China’s paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input–output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China’s paper industry. China’s waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO2 emissions per unit of paper consumption during 2000–2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO2 emissions per unit of paper consumption in China. Since an inverted “U” shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China’s waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China’s paper industry. Thus, although China’s waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China’s paper industry.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3

Data Availability

The data used in this study are drawn from a variety of sources, including official statistics and the literature. The production, import and export volumes of 5 categories of paper products, mechanical pulp, chemical pulp, semi-chemical pulp, recovered paper and non-wood pulp are openly available in FAOSTAT at The input–output coefficients of various types of pulps, the parameters of storage, recovery and incineration of the consumed paper products, the parameters of energy consumption in the pulping and papermaking process and the conversion parameters between energy consumption and CO2 emissions in the MFA model are derived from existing research (Table 1).

Code Availability

Computer code relevant to this study is submitted as supplementary material (Online Resource 1).


  1. 1.

    TPC is calculated as the sum of domestic production and import of the five categories of paper products with exportation subtracted.

  2. 2.

    Consumed paper products will partially remain in the consumption process due to long in-use lifespan (Cote et al. 2015). For example, paper products such as books, journals, and other printed products are usually stored for years before they enter the final disposal process and become recyclable.

  3. 3.

    In the pulp structure calculation, recycled pulp is calculated as the product of recovered paper consumption and the yield ratio for recycled pulping (0.81); chemical pulp is calculated as the sum of chemical pulp consumption, 50% of semi-chemical pulp consumption and non-wood pulp consumption; mechanical pulp is calculated as the sum of mechanical pulp consumption and 50% of semi-chemical pulp consumption.


  1. Berglund C, Söderholm P, Nilsson M (2002) A note on inter-country differences in waste paper recovery and utilization. Resour Conserv Recycl 34(3):175–191

    Article  Google Scholar 

  2. Berglund C, Söderholm P (2003) An econometric analysis of global waste paper recovery and utilization. Environ Econ Manag 26(3):429–456.

    Article  Google Scholar 

  3. Brunner PH, Rechberger H (2016) Practical handbook of material flow analysis (Vol. 1). CRC press.

  4. Chen C, Qiu R (2014) Estimation of energy consumption and carbon emissions of China’s pulp & paper industry. China Pulp Pap 04:50–55

    CAS  Google Scholar 

  5. Corcelli F, Fiorentino G, Vehmas J, Ulgiati (2018) Energy efficiency and environmental assessment of papermaking from chemical pulp-A Finland case study. J Clean Prod 198:96–111

    CAS  Article  Google Scholar 

  6. Cote M, Poganietz WR, Schebek L (2015) Anthropogenic carbon stock dynamics of pulp and paper products in Germany. J Ind Ecol 19(3):366–379.

    CAS  Article  Google Scholar 

  7. Cui H, Sošić G (2019) Recycling common materials: Effectiveness, optimal decisions, and coordination mechanisms. Eur J Oper Res 274(3):1055–1068.

    Article  Google Scholar 

  8. Eurostat (2016) Waste generation and treatment (env_wasgt). Accessed 6 Feb 2016

  9. Edgren JA, Moreland KW (1990) An econometric analysis of paper and wastepaper markets. Resour Energ 11(3):299–319.

    Article  Google Scholar 

  10. FAO (2010) Impact of the global forest industry on atmospheric greenhouse gases.

  11. FAO (2016) FAOSTAT database-forestry production and trade. Accessed 5 Oct 2016

  12. FAO (2019) FAOSTAT database-forestry production and trade. Accessed 22 Dec 2019

  13. Friedrich E, Trois C (2011) Quantification of greenhouse gas emissions from waste management processes for municipalities–A comparative review focusing on Africa. Waste Manag 31(7):1585–1596.

    Article  Google Scholar 

  14. Gang D, Baodong C, Sitong L, Yu R (2016) Empirical analysis on influencing factors of waste paper recovery rate in China. J Sustain For 35(3):183–190.

    Article  Google Scholar 

  15. Gaudreault C, Samson R, Stuart P (2009) Implications of choices and interpretation in LCA for multi-criteria process design: de-inked pulp capacity and cogeneration at a paper mill case study. J Clean Prod 17(17):1535–1546.

    Article  Google Scholar 

  16. Gemechu ED, Butnar I, Gomà-Camps J et al. (2013) A comparison of the GHG emissions caused by manufacturing tissue paper from virgin pulp or recycled waste paper. Int J Life Cycle Assess 18(8):1618–1628

    CAS  Article  Google Scholar 

  17. Grace R, Turner RK, Walter I (1978) Secondary materials and international trade. J Environ Econ Manag 5(2):172–186.

    Article  Google Scholar 

  18. Gullichsen J, Paulapuro H, Fogelholm C-J (2000) Papermaking science and technology, Book 6B. Chemical Pulping. Fapet Oy, Jyväskylä, Finland

  19. Hashimoto S, Nose M, Obara T, Moriguchi Y (2002) Wood products: potential carbon sequestration and impact on net carbon emissions of industrialized countries. Environ Sci Policy 5(2):183–193.

    CAS  Article  Google Scholar 

  20. Hohenthal C, Leon J, Dobon A, Kujanpää M, Meinl G, Ringman J, Hortal M, Forsström U (2019) The ISO 14067 approach to open-loop recycling of paper products: Making it operational. J Clean Prod 224:264–274.

    Article  Google Scholar 

  21. Holmberg JM, Gustavsson L (2007) Biomass use in chemical and mechanical pulping with biomass-based energy supply. Resour Conserv Recycl 52(2):331–350.

    Article  Google Scholar 

  22. Hong SJ, Choi YS, Kim KR, Kang JG, Oh GJ, Hur T (2011) Material flow analysis of paper in korea. Part I. Data calculation model from the flow relationships between paper products. Resour Conserv Recycl 55(12):1206–1213.

    Article  Google Scholar 

  23. IEA (2007) Tracking industrial energy efficiency and CO2 emissions. Organisation for Economic Co-operation and Development

  24. Islam MT, Huda N (2019) Material flow analysis (MFA) as a strategic tool in E-waste management: Applications, trends and future directions. J Environ Manag 244:344–361.

    Article  Google Scholar 

  25. James K (2012) An investigation of the relationship between recycling paper and card and greenhouse gas emissions from land use change. Resour Conserv Recycl 67:44–55.

    Article  Google Scholar 

  26. Kissinger M, Rees WE (2010) An interregional ecological approach for modelling sustainability in a globalizing world—Reviewing existing approaches and emerging directions. Ecol Model 221(21):2615–2623.

    Article  Google Scholar 

  27. Laurijssen J, Marsidi M, Westenbroek A, Worrell E, Faaij A (2010) Paper and biomass for energy?: The impact of paper recycling on energy and CO2 emissions. Resour Conserv Recycl 54(12):1208–1218.

    Article  Google Scholar 

  28. Leon J, Aliaga C, Boulougouris G, Hortal M, Marti JL (2015) Quantifying GHG emissions savings potential in magazine paper production: a case study on supercalendered and light-weight coated papers. J Clean Prod 103:301–308.

    Article  Google Scholar 

  29. Li Y, Zhang C, Xie X (2012) Study on the differences and influencing factors of Chinese carbon dioxide emissions–based on industry Branches’ empirical research. J Ind Technol Econ 31(08):39–45.

  30. Lim B, Brown S, Schlamadinger B (1999) Carbon accounting for forest harvesting and wood products: review and evaluation of different approaches. Environ Sci Policy 2(2):207–216.

    CAS  Article  Google Scholar 

  31. Liu Z (2016) China’s carbon emissions report 2016. Harvard Belfer Center for Science and International Affairs, Cambridge, MA.,

  32. Man Y, Han Y, Li J, Hong M, Zheng W (2019) Life cycle energy consumption analysis and green manufacture evolution for the papermaking industry in China. Green Chem 21(5):1011–1020.

    CAS  Article  Google Scholar 

  33. Martin N, Anglani N, Einstein D, Khrushch M, Worrell E, Price LK (2000) Opportunities to improve energy efficiency and reduce greenhouse gas emissions in the US pulp and paper industry. Lawrence Berkeley National Lab, CA,

  34. Meinl G, Tempel L, Schiefer M, Seidemann C (2017) How old are fibers in paper for recycling and what is their life expectancy? A contribution to the life cycle assessment of wood fiber-based products. TAPPI J 16(7):397–405

    CAS  Article  Google Scholar 

  35. NDRC, Ministry of Industry and Information Technology, National Bureau of Forest (2011) Development plan for paper industry in the 12th five-year period (2011–2015). Beijing, China

  36. Nilsson LJ (1995) Energy efficiency and the pulp and paper industry. American Council for an Energy-Efficient Economy.

  37. OECD (2015) Stat database-municipal waste, generation and treatment. Accessed 5 Oct 2015

  38. Pickin JG, Yuen STS, Hennings H (2002) Waste management options to reduce greenhouse gas emissions from paper in Australia. Atmos Environ 36(4):741–752

    CAS  Article  Google Scholar 

  39. Sandén BA, Karlström M (2007) Positive and negative feedback in consequential life-cycle assessment. J Clean Prod 15(15):1469–1481

    Article  Google Scholar 

  40. Schenk NJ, Moll HC, Potting J (2004) The nonlinear relationship between paper recycling and primary pulp requirements: modeling paper production and recycling in Europe. J Ind Ecol 8(3):141–162.

    Article  Google Scholar 

  41. Sevigné-Itoiz E, Gasol CM, Rieradevall J, Gabarrell X (2015) Methodology of supporting decision-making of waste management with material flow analysis (MFA) and consequential life cycle assessment (CLCA): case study of waste paper recycling. J Clean Prod 105:253–262.

    Article  Google Scholar 

  42. Silva DAL, Pavan ALR, de Oliveira JA, Ometto AR (2015) Life cycle assessment of offset paper production in Brazil: hotspots and cleaner production alternatives. J Clean Prod 93:222–233.

    CAS  Article  Google Scholar 

  43. Stawicki B, Read B editors (2010) The future of paper recycling in Europe: Opportunities and limitations: COST Action E48. The Paper Industry Technical Association (PITA), Dorset, UK

    Google Scholar 

  44. Sun C (2015) An investigation of China’s import demand for wood pulp and wastepaper. For Policy Econ 61:113–121.

    Article  Google Scholar 

  45. Sun M, Wang Y, Shi L, Klemeš JJ (2018) Uncovering energy use, carbon emissions and environmental burdens of pulp and paper industry: A systematic review and meta-analysis. Renew Sustain Energy Rev 92:823–833.

    Article  Google Scholar 

  46. Szabó L, Soria A, Forsström J, Keränen JT, Hytönen E (2009) A world model of the pulp and paper industry: Demand, energy consumption and emission scenarios to 2030. Environ Sci Policy 12(3):257–269.

    CAS  Article  Google Scholar 

  47. van Beukering PJ, Bouman MN (2001) Empirical evidence on recycling and trade of paper and lead in developed and developing countries. World Dev 29(10):1717–1737.

    Article  Google Scholar 

  48. van Ewijk S, Park JY, Chertow MR (2018) Quantifying the system-wide recovery potential of waste in the global paper life cycle. Resour Conserv Recycl 134:48–60.

    Article  Google Scholar 

  49. Virtanen Y, Nilsson S (2013) Environmental impacts of waste paper recycling. Routledge

  50. Wang Y, Yang X, Sun M, Ma L, Li X, Shi L (2016) Estimating carbon emissions from the pulp and paper industry: a case study. Appl Energy 184:779–789.

    CAS  Article  Google Scholar 

  51. Zanin L, Marra G (2012) Rolling regression versus time‐varying coefficient modelling: an empirical investigation of the Okun’S law in some Euro area countries. B Econ Res 64(1):91–108.

    Article  Google Scholar 

  52. Zhou N, Fridley D, Khanna NZ, Ke J, McNeil M, Levine M (2013) China’s energy and emissions outlook to 2050: Perspectives from bottom-up energy end-use model. Energy Policy 53:51–62.

    Article  Google Scholar 

Download references


This research was funded by Ministry of Education Humanities and Social Sciences Fund Project, grant number 19JC790020.

Author Contributions

Conceptualization and methodology: GD and DS; Data curation: CL, LY, and DS; Writing—original draft preparation: DS; Writing—review and editing: DS, CL, and LY; Funding acquisition and supervision: GD.

Author information



Corresponding author

Correspondence to Gang Diao.

Ethics declarations

Conflict of Interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Shang, D., Diao, G., Liu, C. et al. The Impact of Waste Paper Recycling on the Carbon Emissions from China’s Paper Industry. Environmental Management (2021).

Download citation


  • Waste paper recovery rate
  • Carbon emissions
  • Material flow analysis
  • Input–output analysis
  • Rolling regression
  • Monte Carlo simulation