Numerical simulation of CO2 scroll compressor in transcritical compression cycle
- 181 Downloads
Based on the theory of thermodynamics and kinetics, the mathematical model of an orbiting scroll was established and the stress deformations were employed by ANSYS software. Under the action of pressure load, the results show that the serious displacement part is located in the center of the gear head and the maximum deformation is about 7.33 μm. The maximum radial displacement is about 4.42 μm. The maximum radial stress point occurs in the center of the gear head and the maximum stress is about 40.9 MPa. The maximum axial displacement is about 2.31 μm. The maximum axial stress point occurs in the gear head and the maximum stress is about 44.7 MPa. Under the action of temperature load, the results show that the serious deformation part is located in the center of the gear head and the maximum deformation is about 6.3 μm. The maximum thermal stress occurs in the center of the gear head and the maximum thermal stress is about 86.36 MPa. Under the combined action of temperature load and pressure load, the results show that the serious deformation part and the maximum stress are located in the center of the gear head, and the value are about 7.79 μm and 74.19 MPa, respectively.
height of vortex circle (mm)
turn angle of crankshaft (rad)
involute angle (rad)
initial angle (rad)
radius of circle (mm)
The authors acknowledge the support by the natural science foundation of Hebei Province (E2015209239), the support by the Science and technology project of Hebei Province (15214317) and the support of North China University of Science and Technology Fund (SP201306).
- 1.CALM JM (2007) Resource ozone and global warming implications of refrigerant selection for large chillers, In: Proceedings of the 22nd international congress of refrigeration, Beijing, pp 1–9Google Scholar
- 2.Hirao T, Mizukami H, Takeuchi M, et al. (2000) Development of air conditioning system using CO2 for automobile. In: The proceedings of the 4th IIR-Gustav Lorentzen conference on natural working fluids, Purdue University, pp. 193–200Google Scholar
- 8.Evandro LL, Pereira, Cesar J, Deschamps (2017) A heat transfer correlation for the suction and compression chambers of scroll compressors. Int J Refrig 82:325–334Google Scholar
- 10.Lin C, Chang Y, Liang K et al (2005) Temperature and thermal deformation analysis on scrolls of scroll compressor [J]. Appl Therm Eng 25:1724–1739Google Scholar