Abstract
The process of thermal modification can increase the dimensional stability and fungal resistance of wood, thus improving its performance in outdoor applications. This paper investigates the chemical and structural changes in thermally modified and unmodified Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) wood caused by long-term soaking, with a focus on the dynamics of the timber surface properties. Fourier transform infrared spectroscopy, pH measurements and microscopy analysis were conducted in 2-week intervals for 14–20 weeks. The main chemical degradation of the wood, which was attributed to the changes in hemicelluloses and cellulose, was identified by the decreased carboxyl signal and the increased intensity of C–O stretching after soaking. The crystallinity and hygroscopicity of the wood were also affected by soaking. The pH level of the modified wood did not change markedly during soaking. However, the initially low pH values of the thermally modified wood, combined with the effect of water, probably facilitated the wood degradation processes, thus leading to an increased number of cracks and holes, especially in the outer parts of the cell walls.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ahmed SA, Hansson L, Moren T (2013) Distribution of preservatives in thermally modified Scots pine and Norway spruce sapwood. Wood Sci Technol 47:499–513. https://doi.org/10.1007/s00226-012-0509-4
Altgen M, Militz H (2015) Effect of temperature and steam pressure during the thermal modification process. In: 8th European conference on wood modification, Helsinki, Finland, pp 226–233
Andersson S, Serimaa R, Väänänen T, Paakkari T, Jämsä S, Viitaniemi P (2005) X-ray scattering studies of thermally modified Scots pine (Pinus sylvestris L.). Holzforschung 59:422–427. https://doi.org/10.1515/HF.2005.069
Booker RE, Evans JM (1994) The effect of drying schedule on the radial permeability of Pinus radiata D. Don. Holz Roh Werkst 52:150–156. https://doi.org/10.1007/BF02615211
Boonstra MJ, Tjeerdsma B (2006) Chemical analysis of heat treated softwoods. Holz Roh Werkst 64:204–211. https://doi.org/10.1007/s00107-005-0078-4
Borrega M, Kärenlampi PP (2008) Effect of relative humidity on thermal degradation of Norway spruce (Picea abies) wood. J Wood Sci 54:323–328. https://doi.org/10.1007/s10086-008-0953-9
Borrega M, Nevalainen S, Heräjärvi H (2009) Resistance of European and hybrid aspen wood against two brown-rot fungi. Eur J Wood Prod 67:177–182. https://doi.org/10.1007/s00107-009-0322-4
Esteves BM, Pereira HM (2009) Wood modification by heat treatment: a review. BioResources 4:370–404
Esteves B, Marques AV, Domingos I, Pereira H (2007) Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci Technol 41:193–207. https://doi.org/10.1007/s00226-006-0099-0
Esteves B, Videira R, Pereira H (2011) Chemistry and ecotoxicity of heat-treated pine wood extractives. Wood Sci Technol 45:661–676. https://doi.org/10.1007/s00226-010-0356-0
Fengel D, Wegener G (1989) Wood: chemistry, ultrastructure, reaction. Walter de Gruyter, Berlin
Ganne-Chédeville C, Jääskeläinen A, Froidevaux J, Hughes M, Navi P (2012) Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy. Holzforschung 66:163–170. https://doi.org/10.1515/HF.2011.148
Gonzalez-Peña MM, Curling SF, Hale MDC (2009) On the effect of heat on the chemical composition and dimensions of thermally modified wood. Polym Degrad Stab 94:2184–2193. https://doi.org/10.1016/j.polymdegradstab.2009.09.003
Hietala S, Maunu SL, Sundholm F, Jämsä S, Viitaniemi P (2002) Structure of thermally modified wood studied by liquid state NMR measurements. Holzforschung 56:522–528. https://doi.org/10.1515/HF.2002.080
Hill CAS (2006) Wood modification—chemical, thermal and other processes. Wiley, Chichester
Hillis WE (1984) High temperature and chemical effects on wood stability. Part 1: general considerations. Wood Sci Technol 18:281–293. https://doi.org/10.1007/BF00353364
Hon D, Shiraishi N (2001) Wood and cellulosic chemistry. Marcel Dekker Inc, New York
Huang X, Kocaefe D, Kocaefe Y, Boluk Y, Pichette A (2012) Changes in wettability of heat-treated wood due to artificial weathering. Wood Sci Technol 46:1215–1237. https://doi.org/10.1007/s00226-012-0479-6
Kacík F, Smíra P, Kacíková D, Vel’ková V, Nasswettrová A, Vacek V (2015) Chemical alterations of pine wood saccharides during heat sterilization. Carbohydr Polym 117:681–686. https://doi.org/10.1016/j.carbpol.2014.10.065
Kamdem DP, Pizzi A, Guyonnet R, Jermannaud A (1999) Durability of heat-treated wood. International Research Group on Wood Preservation, Rosenheim, pp 6–11
Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Roh Werkst 60:1–6. https://doi.org/10.1007/s00107-001-0261-1
Kocaefe D, Poncsak S, Boluk Y (2008) Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen. BioResources 3:517–537
Korkut S, Akgul M, Dundar T (2008) The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood. Bioresour Technol 99:1861–1868. https://doi.org/10.1016/j.biortech.2007.03.038
Metsä-Kortelainen S, Antikainen T, Viitaniemi P (2006) The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C. Holz Roh Werkst 64:192–197. https://doi.org/10.1007/s00107-005-0063-y
Militz H (2002) Heat treatment technologies in Europe: scientific background and technological state-of-art. In: Enhancing the durability of lumber and engineered wood products, FPS/Madison US, Conference, Florida, pp 11–13
Mononen K, Jääskeläinen A, Alvila L, Pakkanen TT, Vuorinen T (2005) Chemical changes in silver birch (Betula pendula) wood caused by hydrogen peroxide bleaching monitored by color measurement (CIELab) and UV-Vis, FTIR and UVRR spectroscopy. Holzforschung 59:381–388. https://doi.org/10.1515/HF.2005.063
Nuopponen M, Vuorinen T, Jämsä S, Viitaniemi P (2004) Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J Wood Chem Technol 24:13–26. https://doi.org/10.1081/WCT-120035941
Özgenç Ö, Durmaz C, Boyaci IH, Eksi-Kocakb H (2016) Determination of chemical changes in heat-treated wood using ATR-FTIR and FT Raman spectrometry. Spectrochim Acta A Mol Biomol Spectrosc 171:395–400. https://doi.org/10.1016/j.saa.2016.08.026
Pelaez-Samaniego MR, Yadama V, Lowell E, Espinoza-Herrera R (2013) A review of wood thermal pretreatments to improve wood composite properties. Wood Sci Technol 47:1285–1319. https://doi.org/10.1007/s00226-013-0574-3
Pizzo B, Pecoraro E, Macchioni N (2013) A new method to quantitatively evaluate the chemical composition of waterlogged wood by means of attenuated total reflectance Fourier transform infrared (ATR FT-IR) measurements carried out on wet material. Appl Spectrosc 67:553–562. https://doi.org/10.1366/12-06819
Sandberg D, Kutnar A, Mantanis G (2017) Wood modification technologies—a review. iForest 10:895–908. https://doi.org/10.3832/ifor2380-010
Shi JL, Kocaefe D, Zhang J (2007) Mechanical behaviour of Québec wood species heat-treated using ThermoWood process. Holz Roh Werkst 65:255–259. https://doi.org/10.1007/s00107-007-0173-9
Tjeerdsma BF, Militz H (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz Roh Werkst 63:102–111. https://doi.org/10.1007/s00107-004-0532-8
Tjeerdsma BF, Boonstra M, Pizzi A, Tekely P, Militz H (1998) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst 56:149–153. https://doi.org/10.1007/s001070050287
Weiland JJ, Guyonnet R (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz Roh Werkst 61:216–220. https://doi.org/10.1007/s00107-003-0364-y
Yildiz S, Gezer ED, Yildiz UC (2006) Mechanical and chemical behavior of spruce wood modified by heat. Build Environ 41:1762–1766. https://doi.org/10.1016/j.buildenv.2005.07.017
Yildiz S, Yildiz UC, Tomak ED (2011) The effects of natural weathering on the properties of heat-treated alder wood. BioResources 6:2504–2521. https://doi.org/10.15376/biores.6.3.2504-2521
Acknowledgements
The authors thank the Mikkeli University of Applied Sciences staff and the International Thermowood® Association for their technical, materials and financial contributions, as well as Dr. Jouni Hiltunen for his valuable assistance during microscopy, Dr. Ville Nissinen for his support in FTIR test, and Dr. Veikko Möttönen for his suggestions of experimental design.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Cai, C., Antikainen, J., Luostarinen, K. et al. Wetting-induced changes on the surface of thermally modified Scots pine and Norway spruce wood. Wood Sci Technol 52, 1181–1193 (2018). https://doi.org/10.1007/s00226-018-1030-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-018-1030-1