Advertisement

Electrical Engineering

, Volume 100, Issue 2, pp 803–809 | Cite as

Efficiency optimization of a conventional boost DC/DC converter

  • Mehmed Çelebi
Original Paper
  • 170 Downloads

Abstract

In this paper, a numerical multivariable efficiency optimization of a Conventional DC/DC boost converter is presented. The optimization based on efficiency function includes parameters of both frequency and coil values. An experimental data population has created regarding to fixed input and output values to achieve a multivariable optimization procedure. The optimum frequency and coil values are obtained from experimental results to achieve maximum efficiency and compared with genetic algorithm simulation results.

Keywords

Efficiency Optimization Boost converter GA 

Notes

Acknowledgements

The author would like to thank to Ataturk University for technical support.

References

  1. 1.
    Beltrame F, Dupont FH, Sartori HC, Cancian EC, Rech C, Renes Pinheiro J (2013)Efficiency optimization of DC/DC boost converter applied to the photovoltaic system. In: Industrial electronics society, IECON 2013—39th annual conference of the IEEE publication year: 2013, pp 706–711. doi: 10.1109/IECON.2013.6699221
  2. 2.
    Kwak D-K, Lee S-H, Jung D-Y (2009) A new buck-boost dc/dc converter of high efficiency by soft switching technique. In: Power electronics and motion control conference, 2009. IPEMC ’09. IEEE 6th international publication year: 2009, pp 1295–1299. doi: 10.1109/IPEMC.2009.5157585
  3. 3.
    Ivanovic Z, Blanusa B, Knezic M (2012) Algorithm for efficiency optimization of the boost converter in wind turbine. In: Power electronics and motion control conference (EPE/PEMC), 2012 15th international publication year: 2012, pp DS3c.9-1–DS3c.9-6. doi: 10.1109/EPEPEMC.2012.6397345
  4. 4.
    Ivanovic Z, Dokić B, Blanusa B, Knežić M (2010) Boost converter efficiency optimization in wind turbine. In: Power electronics and motion control conference (EPE/PEMC), 2010 14th international publication year: 2010, pp T3-1–T3-5. doi: 10.1109/EPEPEMC.2010.5606839
  5. 5.
    Wai R-J, Duan R-Y, Jheng K-H (2012) High-efficiency bidirectional dc–dc converter with high-voltage gain. IET Power Electron 5(2):173–184. doi: 10.1049/iet-pel.2011.0194 CrossRefGoogle Scholar
  6. 6.
    Wai Rong-Jong, Duan Rou-Yong (2007) High-efficiency bidirectional converter for power sources with great voltage diversity. IEEE Trans Power Electron 22(5):1986–1996CrossRefGoogle Scholar
  7. 7.
    Stahl G, Rodriguez M, Maksimovic D (2012) A high efficiency bidirectional buck-boost DC–DC converter. In: Applied power electronics conference and exposition (APEC), 2012 twenty-seventh annual IEEE publication year: 2012, pp 1362–1367Google Scholar
  8. 8.
    Renaudineau H, Houari A, Shahin A, Martin J-P, Pierfederici S, Meibody-Tabar F, Gerardin B (2014) Efficiency optimization through current-sharing for paralleled DC–DC boost converters with parameter estimation. IEEE Trans Power Electron 29(2):759–767. doi: 10.1109/TPEL.2013.2256369 CrossRefGoogle Scholar
  9. 9.
    Abbatelli L, Macauda M, Catalisano G (2014) Fully SiC based high efficiency boost converter. In: Applied power electronics conference and exposition (APEC), 2014 twenty-ninth annual IEEE publication year: 2014, pp 1835–1837. doi: 10.1109/APEC.2014.6803555
  10. 10.
    Eichhorn T Boost converter efficiency through accurate calculations. In: IEEE conference publications, senior applications engineer, national semiconductor, Grass Valley, CalifGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  1. 1.Department of Electrical EngineeringAtatürk UniversityErzurumTurkey

Personalised recommendations