Correction to: Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation

The Original Article was published on 06 February 2021

Correction to: The International Journal of Advanced Manufacturing Technology

https://doi.org/10.1007/s00170-021-06710-6

The original article contained a mistake.

The correct bibliographic data for Reference 33 are:

Psyllaki P, Kefalonikas G, Pantazopoulos G, Antoniou S, Sideris J (2003) Microstructure and tribological behaviour of liquid nitrocarburised tool steels. Surf Coat Technol. 162(1):67–78. https://doi.org/10.1016/S0257-8972(02)00566-2

Instead of:

Psyllaki P, Kefalonikas G, Pantazopoulos G, Antoniou S, Sideris J (2002) Microstructure and tribological behaviour of liquid nitrocarburised tool steels. Surf Coat Technol:67–78.

The original article has been corrected.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Tatiany Mafra da Silva.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The online version of the original article can be found at https://doi.org/10.1007/s00170-021-06710-6

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

da Silva, T.M., Diniz, A.E. & Coelho, R.T. Correction to: Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. Int J Adv Manuf Technol 113, 1449 (2021). https://doi.org/10.1007/s00170-021-06834-9

Download citation