TY - JOUR AU - Bayesteh, A. AU - Ko, J. AU - Jun, M. B. -. G. PY - 2016 DA - 2016// TI - Micro flat end milling simulation model with instantaneous plowing area prediction JO - J Micro Nano Manuf VL - 4 UR - https://doi.org/10.1115/1.4032757 DO - 10.1115/1.4032757 ID - Bayesteh2016 ER - TY - JOUR AU - Hildering, S. AU - Michalski, M. AU - Engel, U. AU - Merklein, M. PY - 2016 DA - 2016// TI - Tool load sensitivity against multidimensional process influences in microblanking of copper foils with silicon punches JO - J Manuf Sci Eng VL - 138 UR - https://doi.org/10.1115/1.4033522 DO - 10.1115/1.4033522 ID - Hildering2016 ER - TY - JOUR AU - Jain, V. K. AU - Sidpara, A. AU - Balasubramaniam, R. AU - Lodha, G. S. AU - Dhamgaye, V. P. AU - Shukla, R. PY - 2014 DA - 2014// TI - Micromanufacturing: a review—Part I JO - Proc Inst Mech Eng B J Eng Manuf VL - 228 UR - https://doi.org/10.1177/0954405414539487 DO - 10.1177/0954405414539487 ID - Jain2014 ER - TY - JOUR AU - Kim, C. -. J. AU - Mayor, J. R. AU - Ni, J. AU - Rhett Mayor, J. AU - Ni, J. PY - 2004 DA - 2004// TI - A static model of chip formation in microscale milling JO - Manuf Sci VL - 126 UR - https://doi.org/10.1115/1.1813475 DO - 10.1115/1.1813475 ID - Kim2004 ER - TY - BOOK AU - Koç, M. AU - Özel, T. PY - 2011 DA - 2011// TI - Micro-manufacturing: design and manufacturing of micro-products PB - Sons, Inc. CY - Hoboken UR - https://doi.org/10.1002/9781118010570 DO - 10.1002/9781118010570 ID - Koç2011 ER - TY - JOUR AU - Kraus, M. AU - Hufnagel, T. AU - Merklein, M. PY - 2019 DA - 2019// TI - Accuracy of conventional finite element models in bulk-forming of micropins from sheet metal JO - J Micro Nano Manuf VL - 7 UR - https://doi.org/10.1115/1.4042965 DO - 10.1115/1.4042965 ID - Kraus2019 ER - TY - JOUR AU - Leo Kumar, S. P. AU - Jerald, J. AU - Kumanan, S. AU - Prabakaran, R. PY - 2014 DA - 2014// TI - A review on current research aspects in tool-based micromachining processes JO - Mater Manuf Process VL - 29 UR - https://doi.org/10.1080/10426914.2014.952037 DO - 10.1080/10426914.2014.952037 ID - Leo Kumar2014 ER - TY - JOUR AU - Moges, T. M. AU - Desai, K. A. AU - Rao, P. V. M. PY - 2016 DA - 2016// TI - Improved process geometry model with cutter runout and elastic recovery in micro-end milling JO - Procedia Manuf VL - 5 UR - https://doi.org/10.1016/j.promfg.2016.08.040 DO - 10.1016/j.promfg.2016.08.040 ID - Moges2016 ER - TY - JOUR AU - Oliveira, F. B. AU - Rodrigues, A. R. AU - Coelho, R. T. AU - Souza, A. F. PY - 2015 DA - 2015// TI - Size effect and minimum chip thickness in micromilling JO - Int J Mach Tools Manuf VL - 89 UR - https://doi.org/10.1016/j.ijmachtools.2014.11.001 DO - 10.1016/j.ijmachtools.2014.11.001 ID - Oliveira2015 ER - TY - JOUR AU - Zhang, X. AU - Yu, T. AU - Wang, W. PY - 2017 DA - 2017// TI - Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out JO - Int J Mech Sci VL - 136 UR - https://doi.org/10.1016/j.ijmecsci.2017.12.019 DO - 10.1016/j.ijmecsci.2017.12.019 ID - Zhang2017 ER - TY - JOUR AU - OLIAEI, S. N. B. AU - KARPAT, Y. PY - 2016 DA - 2016// TI - Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V JO - J Mater Process Technol VL - 235 UR - https://doi.org/10.1016/j.jmatprotec.2016.04.010 DO - 10.1016/j.jmatprotec.2016.04.010 ID - OLIAEI2016 ER - TY - JOUR AU - Dib, M. H. M. AU - Duduch, J. G. AU - Jasinevicius, R. G. PY - 2018 DA - 2018// TI - Minimum chip thickness determination by means of cutting force signal in micro endmilling JO - Precis Eng VL - 51 UR - https://doi.org/10.1016/j.precisioneng.2017.08.016 DO - 10.1016/j.precisioneng.2017.08.016 ID - Dib2018 ER - TY - JOUR AU - Przestacki, D. AU - Chwalczuk, T. AU - Wojciechowski, S. PY - 2017 DA - 2017// TI - The study on minimum uncut chip thickness and cutting forces during laser-assisted turning of WC/NiCr clad layers JO - Int J Adv Manuf Technol VL - 91 UR - https://doi.org/10.1007/s00170-017-0035-5 DO - 10.1007/s00170-017-0035-5 ID - Przestacki2017 ER - TY - JOUR AU - Liu, Z. AU - Shi, Z. AU - Wan, Y. Y. PY - 2013 DA - 2013// TI - Definition and determination of the minimum uncut chip thickness of microcutting JO - Int J Adv Manuf Technol VL - 69 UR - https://doi.org/10.1007/s00170-013-5109-4 DO - 10.1007/s00170-013-5109-4 ID - Liu2013 ER - TY - JOUR AU - Rahman, M. A. AU - Amrun, M. R. AU - Rahman, M. AU - Kumar, A. S. PY - 2017 DA - 2017// TI - Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties JO - Int J Mach Tools Manuf VL - 115 UR - https://doi.org/10.1016/j.ijmachtools.2016.11.003 DO - 10.1016/j.ijmachtools.2016.11.003 ID - Rahman2017 ER - TY - JOUR AU - Mekid, S. PY - 2013 DA - 2013// TI - Micro machining issues : design and machining process JO - Adv Mater Res VL - 739 UR - https://doi.org/10.4028/www.scientific.net/AMR.739.238 DO - 10.4028/www.scientific.net/AMR.739.238 ID - Mekid2013 ER - TY - JOUR AU - Mekid, S. PY - 2014 DA - 2014// TI - Design and testing of a micro-dynamometer for desktop micro-milling machine JO - Adv Mater Res VL - 902 UR - https://doi.org/10.4028/www.scientific.net/AMR.902.267 DO - 10.4028/www.scientific.net/AMR.902.267 ID - Mekid2014 ER - TY - JOUR AU - Danas, K. AU - Deshpande, V. S. AU - Fleck, N. A. PY - 2012 DA - 2012// TI - Size effects in the conical indentation of an elasto-plastic solid JO - J Mech Phys Solids VL - 60 UR - https://doi.org/10.1016/j.jmps.2012.05.002 DO - 10.1016/j.jmps.2012.05.002 ID - Danas2012 ER - TY - JOUR AU - Waldorf, D. J. AU - DeVor, R. E. AU - Kapoor, S. G. PY - 1999 DA - 1999// TI - An evaluation of ploughing models for orthogonal machining JO - J Manuf Sci Eng VL - 121 UR - https://doi.org/10.1115/1.2833050 DO - 10.1115/1.2833050 ID - Waldorf1999 ER - TY - BOOK AU - Johnson, K. L. PY - 2003 DA - 2003// TI - Contact mechanics, 9a PB - Cambridge University Press CY - New York ID - Johnson2003 ER - TY - JOUR AU - Coelho, R. T. AU - Diniz, A. E. AU - Silva, T. M. PY - 2017 DA - 2017// TI - An experimental method to determine the minimum uncut chip thickness (hmin) in orthogonal cutting JO - Procedia Manuf VL - 10 UR - https://doi.org/10.1016/J.PROMFG.2017.07.047 DO - 10.1016/J.PROMFG.2017.07.047 ID - Coelho2017 ER - TY - STD TI - Ducobu FE, Rivière-Lorphèvre EF (2017) Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica:1577–1592. https://doi.org/10.1007/s11012-016-0499-7 ID - ref22 ER - TY - JOUR AU - Ramos, A. C. AU - Autenrieth, H. AU - Strauß, T. AU - Deuchert, M. AU - Hoffmeister, J. AU - Schulze, V. PY - 2012 DA - 2012// TI - Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut JO - J Mater Process Technol VL - 212 UR - https://doi.org/10.1016/j.jmatprotec.2011.07.007 DO - 10.1016/j.jmatprotec.2011.07.007 ID - Ramos2012 ER - TY - JOUR AU - Malekian, M. AU - Mostofa, M. G. G. AU - Park, S. S. S. AU - Jun, M. B. G. B. G. PY - 2012 DA - 2012// TI - Modeling of minimum uncut chip thickness in micro machining of aluminum JO - J Mater Process Technol VL - 212 UR - https://doi.org/10.1016/j.jmatprotec.2011.05.022 DO - 10.1016/j.jmatprotec.2011.05.022 ID - Malekian2012 ER - TY - BOOK AU - Montgomery, D. C. PY - 2017 DA - 2017// TI - Design and analysis of experiments, 9a PB - Sons, Inc. CY - Arizona ID - Montgomery2017 ER - TY - JOUR AU - Thiele, J. D. AU - Melkote, S. N. AU - Peascoe, R. A. AU - Watkins, T. R. PY - 2000 DA - 2000// TI - Effect of cutting-edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 JO - J Manuf Sci Eng VL - 122 UR - https://doi.org/10.1115/1.1286369 DO - 10.1115/1.1286369 ID - Thiele2000 ER - TY - JOUR AU - Uhlmann, E. AU - Oberschmidt, D. AU - Kuche, Y. AU - Lowenstein, A. PY - 2014 DA - 2014// TI - Cutting edge preparation of micro milling tools JO - Procedia CIRP VL - 14 UR - https://doi.org/10.1016/j.procir.2014.03.083 DO - 10.1016/j.procir.2014.03.083 ID - Uhlmann2014 ER - TY - JOUR AU - Willert, M. AU - Riemer, O. AU - Brinksmeier, E. PY - 2016 DA - 2016// TI - Size effect in micro machining of steel depending on the material state JO - Procedia CIRP VL - 46 UR - https://doi.org/10.1016/j.procir.2016.03.187 DO - 10.1016/j.procir.2016.03.187 ID - Willert2016 ER - TY - JOUR AU - Bartarya, G. AU - Choudhury, S. K. PY - 2012 DA - 2012// TI - State of the art in hard turning JO - Int J Mach Tools Manuf VL - 53 UR - https://doi.org/10.1016/j.ijmachtools.2011.08.019 DO - 10.1016/j.ijmachtools.2011.08.019 ID - Bartarya2012 ER - TY - JOUR AU - Komanduri, R. PY - 1971 DA - 1971// TI - Some aspects of machining with negative rake tools simulating grinding JO - Int J Mach Tool Des Res VL - 11 UR - https://doi.org/10.1016/0020-7357(71)90027-8 DO - 10.1016/0020-7357(71)90027-8 ID - Komanduri1971 ER - TY - CHAP AU - Casarini, M. AU - Ramos, L. V. AU - Sinatora, A. PY - 2005 DA - 2005// TI - Determinação do coeficiente de atrito em altas temperaturas por meio de ensaio de deslizamento BT - Congresso Brasileiro de Engenharia de Fabricação - COBEF ID - Casarini2005 ER - TY - JOUR AU - Diehl, I. L. AU - Dong, J. AU - Da, A. AU - Rocha, S. PY - 2017 DA - 2017// TI - Propriedades do aço AISI 4140 nitretado a gás JO - Rev Mater VL - 22 UR - https://doi.org/10.1590/S1517-707620170004.0237 DO - 10.1590/S1517-707620170004.0237 ID - Diehl2017 ER - TY - STD TI - Psyllaki P, Kefalonikas G, Pantazopoulos G, Antoniou S, Sideris J (2003) Microstructure and tribological behaviour of liquid nitrocarburised tool steels. Surf Coat Technol 162(1):67–78. https://doi.org/10.1016/S0257-8972(02)00566-2 ID - ref33 ER - TY - BOOK AU - Dieter, G. E. PY - 1981 DA - 1981// TI - Metalurgia Mecânica, 2a PB - Guanabara Dois S.A CY - Rio de Janeiro ID - Dieter1981 ER -