Picea abies
Karst.) is shown. This measurement system is contact-free and allows the measurement of strains in two orthogonal directions simultaneously and in realtime. The capability of the measurement system is compared with other measurement arrangements (DMS, Image correlation technique, holography, Moiré technique) in regard to the special efforts of its application to wood. Moreover, from the measured strains and stress modulus of elasticity (grain direction), tensile strength and Poisson's ratio of earlywood and latewood were determined separately.
Picea abies
Karst.) dargestellt. Das vorgestellte Meßsystem ist kontaktlos und erlaubt die gleichzeitige Messung von Dehnungen in 2 orthogonalen Richtungen. Die Eigenschaften des Meßsystems werden mit anderen Anordnungen verglichen (DMS, Bildkorrelationstechnik, Holographie, Moirétechnik), vor allem im Hinblick auf die spezifischen Anforderungen bei Holz. Weiters wurden aus den gemessenen Dehnungen und Spannungen E-Modul (in Faserrichtung), Zugfestigkeit und Poisson'sche Konstanten, getrennt nach Früh- und Spätholz, bestimmt.
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sinn, G., Reiterer, A., Stanzl-Tschegg, S. et al. Determination of strains of thin wood samples using videoextensometry. Holz als Roh- und Werkstoff 59, 177–182 (2001). https://doi.org/10.1007/s001070100197
Issue Date:
DOI: https://doi.org/10.1007/s001070100197