Abstract
Crack formation is a serious defect that may reduce the lifetime of unfinished wood in service. An accelerated weathering test was carried out to study crack formation of solid wood board specimens of aspen (Populus tremula L.) and Norway spruce (Picea abies (L.) Karst.). The influence of the boards' distance from the pith was also studied. The aspen specimens developed a higher number of cracks than the spruce specimens. However, these cracks were shorter and less injurious than those propagating in spruce wood. It is concluded that a solid wood siding of aspen will show at least as good a performance as spruce regarding crack injuries. For both aspen and spruce, boards taken from near the pith had a lower proportion of long cracks than boards taken further out. This supports the rule that boards with a high proportion of annual rings perpendicular to the surface (the boards near to the pith) have a higher resistance to crack formation than boards with a high proportion of horizontal annual rings.
Zusammenfassung
Rißbildung gilt als schwerwiegender Holzfehler, der die Lebensdauer von unbehandeltem Schnittholz begrenzen kann. Eine beschleunigte Bewitterung wurde durchgeführt, um die Rißbildung in Espen- und Fichtenbrettern zu verfolgen. Der Einfluß des Abstands von der Markröhre wurde ebenfalls untersucht. In Espenproben entwickelte sich eine größere Anzahl von Rissen als in Fichtenproben. Die Risse waren allerdings kürzer und weniger schwerwiegend als in Fichtenbrettern. Daher können beide Holzarten für die Verarbeitung als gleichwertig angesehen werden. In beiden Fällen zeigten die marknahen Bretter eine geringere Anzahl an Rissen als die weiter außen entnommenen Proben. Dies stützt die bekannte Regel, daß Bretter mit einem hohen Anteil an stehenden Jahrringen (d.h. nahe an der Markröhre entnommene) weniger zu Rißbildung neigen als solche mit liegenden Jahrringen.
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Flæte, P., Høibø, O., Fjærtoft, F. et al. Crack formation in unfinished siding of aspen (Populus tremula L.) and Norway spruce (Picea abies (L.) Karst.) during accelerated weathering. Holz als Roh- und Werkstoff 58, 135–139 (2000). https://doi.org/10.1007/s001070050404
Issue Date:
DOI: https://doi.org/10.1007/s001070050404