Advertisement

Holz als Roh- und Werkstoff

, Volume 56, Issue 3, pp 215–216 | Cite as

Addition of metakaoline to portland cement, influence on hydration and properties of cement-bonded wood composites

  • M. H. Simatupang
Brief Original

Keywords

Portland Cement Calcium Hydroxide Wooden Form Aluminium Sulfate Aluminum Sulfate 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Sandermann W, Kohler R (1964) Short aptitude test of wood for cement-bonded composites. Holzforschung 18 (12): 53–59CrossRefGoogle Scholar
  2. Shebl FA, Abdullah MS, Helmy FM Quantitative determination of the free lime in tri- and di-calcium silicate hydrates. TIZ international Magazin für Verfahrenstechnik vol. 112, No. 1: 57–59Google Scholar
  3. Simatupang MH (1979) Water requirement in the manufacture of cement-bonded wood particleboards. Holz Roh-Werkstoff 37: 379–382CrossRefGoogle Scholar
  4. Simatupang MH, Neubauer A (1993) Manufacturing and properties of rapid hardening cement-bonded particleboards farbricated by carbon dioxide injection. Influence of cement strength class. Holz Roh-Werkstoff 52: 309–311CrossRefGoogle Scholar
  5. Simatupang MH, Moeller R, Scholz W (1993) Fabrication and determination of the shear strength of circular cement-bonded fiberboards made by carbon dioxide injection. Holz Roh-Werkstoff 52: 383CrossRefGoogle Scholar
  6. Simatupang MH, Habighorst C, Lange H, Neubauer A (1995) Investigations on the influence of the addition of carbon dioxide on the production and properties of rapidly set wood-cement composites. Cement & Concrete Composites 17: 187–197CrossRefGoogle Scholar
  7. Takats P, Simatupang MH (1993) Suitability of fiber sludge as reinforcing material for manufacturing of gypsum-fiber products. In: A. A. Moslemi (editor), Inorganic-Bonded Wood and Fiber Composite Materials, Forest Products Research Society, WI 43705, Volume 3, 97–197Google Scholar

Copyright information

© Springer-Verlag 1998

Authors and Affiliations

  • M. H. Simatupang
    • 1
  1. 1.Department of Wood, Pulp, Paper and Coating Technology, School of Industrial TechnologyUniversity Sains MalaysiaPenangMalaysia

Personalised recommendations