Abstract
An attempt was made to analyse the strength and stiffness of moltinject corner joints of cabinet furniture by comparison with that of pin dowels corner joints. The deflection of cabinet furniture whose corners were joined by the method of moltinject was predicted in this study using FEM calculations.
Zusammenfassung
Die Biegefestigkeit und Steifheit von MOLTINJECT-Eckverbindungen bei Kastenmöbeln wurde untersucht und mit denen konventioneller Dübelverbindungen verglichen. Mit Hilfe der Finite-Elemente-Methode konnten die entsprechenden Biege-Elastizitätsmodule simmliert und damit die Verbiegung der Eckverbindungen unter Last vorhergesagt werden.
Similar content being viewed by others
References
Albin, R 1989: Durchbiegung und Lastannahmen im Korpusmöbelbau. Holz Roh-Werkstoff 47:7–10
Cai, Liping; Wang, Fenghu 1993: Influence of the stiffness of corner joint on case furniture deflection. Holz Roh-Werkstoff 51: 406–408
Eckelman, C. A; Rabiej, R. 1985: A comprehensive method of analysis of case furniture. Forest Prod. J. 35 (4): 62–68
Eckelman, C. A. 1989: Strength of furniture joints constructed with through-bolts and dowel-nuts. Forest Prod. J. 39 (11/12): 41–48
Jenkins, W. M. 1982: Structural mechanics and analysis. Van Nostrand Reinhold Co. Ltd.
Kenneth H. Huebner 1974: The finite element method for engineers. John Wily & Sons
Smardzewski, S.; Dziegielewski, St. 1993: Stability of cabinet furniture backing boards. Wood Sci. Technol. 28: 35–44
Author information
Authors and Affiliations
Additional information
MOLTINJECT is a method for the corner joint of furniture and the samples were offered by Kurt Held GmbH.
Rights and permissions
About this article
Cite this article
Cai, L., Wang, F. & Tan, H. Study on the strength of moltinject corner joints of furniture. Holz als Roh-und Werkstoff 53, 385–388 (1995). https://doi.org/10.1007/s001070050113
Issue Date:
DOI: https://doi.org/10.1007/s001070050113