Structural products made of beech wood: quality assessment of the raw material

Abstract

Hardwood timber is becoming increasingly important in Europe for its use as structural material, both as solid wood and engineered structural products. In Italy, the great abundance of beech forests has recently led to a research project to investigate the use of this species in construction. A first step is the characterization of the raw material for the production of structural glued products. This requires developing the strength grading of beech boards, both by visual and machine methods. To the aim, four provenances were collected across the distribution of beech in Italy. The main strength reducing characteristics were measured visually, and the dynamic modulus of elasticity was determined before performing the destructive bending tests of sampled boards. Correlations between properties were similar to what is usually observed for softwoods with the exception of density, which did not correlate with any other property. Several visual rules and machine settings were developed and compared, showing the effectiveness of both methods for the strength grading of beech. The grading yields for the high strength classes were very similar for machine and visual grading, while the machine permitted to reduce the number of rejected elements when two grades were selected at the same time.

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3

References

  1. Aicher S, Ohnesorge D (2011) Shear strength of glued laminated timber made from European beech timber. Eur J Wood Prod 69:143–154. https://doi.org/10.1007/s00107-009-0399-9

    CAS  Article  Google Scholar 

  2. Aicher S, Reinhardt H-W (2007) Delamination properties and shear strength of glued beech wood laminations with red heartwood. Holz Roh- Werkst 65:125–136. https://doi.org/10.1007/s00107-006-0135-7

    CAS  Article  Google Scholar 

  3. Aicher S, Christian Z, Dill-langer G (2014) Hardwood Glulams—emerging timber products of superior mechanical properties. In: Proceedings of the World Conference on Timber Engineering, WCTE 2014. Québec City, Canada

  4. Brunetti M, Burato P, Cremonini C et al (2016) Visual and machine grading of larch (Larix decidua Mill.) structural timber from the Italian Alps. Mater Struct 49:2681–2688. https://doi.org/10.1617/s11527-015-0676-5

    Article  Google Scholar 

  5. Cibecchini D, Cavalli A, Goli G, Togni M (2016) Beech sawn timber for structural use: a case study for mechanical characterization and optimization of the Italian visual strength grading rule. J For Sci 62:521–528. https://doi.org/10.17221/93/2016-JFS

    Article  Google Scholar 

  6. DIN 4074-5 (2008) Strength grading of wood—part 5: Sawn harwood. DIN, Berlin

    Google Scholar 

  7. Ehrhart T, Fink G, Steiger R, Frangi A (2016a) Experimental Investigation of Tensile Strength and Stiffness Indicators Regarding European Beech Timber. In: Proceedings of the World Conference on Timber Engineering, WCTE 22-25 August, Vienna, Austria 600–607

  8. Ehrhart T, Fink G, Steiger R, Frangi A (2016b) Strength grading of European beech lamellas for the production of GLT & CLT. In: International Network on Timber Engineering Research, INTER, Meeting 49, Graz, Austria 29–42

  9. Ehrhart T, Steiger R, Frangi A (2018) Mechanical properties of European beech glued laminated timber. In: Proceedings of the International Network on Timber Engineering Research, INTER, Meeting 51, Tallin, Estonia. paper 51-12-4

  10. Ehrhart T, Steiger R, Frangi A (2018b) A non-contact method for the determination of fibre direction of European beech wood (Fagus sylvatica L.). Eur J Wood Prod 76:925–935. https://doi.org/10.1007/s00107-017-1279-3

    Article  Google Scholar 

  11. EN 1310 (1997) Round and sawn timber. Method of measurement of features. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  12. EN 13183-1 (2002) Moisture content of a piece of sawn timber. Determination by oven dry method. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  13. EN 14080 (2013) Timber structures—glued laminated timber and glued solid timber—requirements. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  14. EN 14081-1 (2016) Timber structures. Strength graded structural timber with rectangular cross section. Part 1: General requirements. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  15. EN 14081-2 (2018) Timber structures - Strength graded structural timber with rectangular cross section—part 2: Machine grading; additional requirements for type testing. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  16. EN 14358 (2016) Timber structures—calculation and verification of characteristic values. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  17. EN 16351 (2015) Timber structures—Cross laminated timber-requirements. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  18. EN 1912 (2012) Structural Timber. Strength classes. Assignment of visual grades and species. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  19. EN 338 (2016) Structural timber. Strength classes. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  20. EN 384 (2016) Structural timber—determination of characteristic values of mechanical properties and density. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  21. EN 408 (2012) Timber structures - Structural timber and glued laminated timber—determination of some physical and mechanical properties. CEN-European Committee for Standardization, Brussels

    Google Scholar 

  22. Frese M, Blass HJ (2005) Beech glulam strength classes. CIB-W18

  23. Glos P, Denzler JK (2006) Allocation of Central European hardwoods into EN 1912. In: Proceedings of the CIB W18, Meeting 39, Florence, Italy. Paper 39-6-1

  24. Glos P, Denzler JK, Linsenmann PW (2004) Strength and stiffness behaviour of beech laminations for high strength glulam. In: Proceedings of the CIB W18, Meeting 37, Edinburgh, Scotland. paper 37-6-3

  25. ISO 13061-2 (2014) Physical and mechanical properties of wood—test methods for small clear specimen. Part 2: Determination of density for physical and mechanical tests. ISO-International Organization for Standardization, Geneva

  26. Luedtke J, Amen C, van Ofen A, Lehringer C (2015) 1C-PUR-bonded hardwoods for engineered wood products: influence of selected processing parameters. Eur J Wood Prod 73:167–178. https://doi.org/10.1007/s00107-014-0875-8

    CAS  Article  Google Scholar 

  27. Nocetti M, Bacher M, Brunetti M, et al (2010) Machine grading of Italian structural timber: Preliminary results on different wood species. In: Proceedings of the World Conference on timber engineering, WCTE 2010, Riva del Garda, Italy

  28. Nocetti M, Brancheriau L, Bacher M et al (2013) Relationship between local and global modulus of elasticity in bending and its consequence on structural timber grading. Eur J Wood Prod 71:297–308. https://doi.org/10.1007/s00107-013-0682-7

    CAS  Article  Google Scholar 

  29. Nocetti M, Brunetti M, Bacher M (2016) Efficiency of the machine grading of chestnut structural timber: prediction of strength classes by dry and wet measurements. Mater Struct 49:4439–4450. https://doi.org/10.1617/s11527-016-0799-3

    Article  Google Scholar 

  30. Ohnesorge D, Richter K, Becker G (2010) Influence of wood properties and bonding parameters on bond durability of European Beech (Fagus sylvatica L.) glulams. Ann For Sci 67:601–610. https://doi.org/10.1051/forest/2010002

    Article  Google Scholar 

  31. Schmidt M, Glos P, Wegener G (2010) Verklebung von Buchenholz für tragende Holzbauteile. Eur J Wood Prod 68:43–57. https://doi.org/10.1007/s00107-009-0382-5

    Article  Google Scholar 

  32. Stapel P, Van de Kuilen JWG (2013) Effects of grading procedures on the scatter of characteristic values of European grown sawn timber. Mater Struct/Mater Constr 46:1587–1598. https://doi.org/10.1617/s11527-012-9999-7

    Article  Google Scholar 

  33. Torno S, Knorz M, Van de Kuilen JW (2013) Supply of beech lamellas for the production of glued laminated timber. In: Proceedings of the International Scientific Conference on Hardwood Processing, ISCHP 2013. Florence, Italy, pp 210–217

  34. Vega A, Dieste A, Guaita M et al (2012) Modelling of the mechanical properties of Castanea sativa mill. structural timber by a combination of non-destructive variables and visual grading parameters. Eur J Wood Prod 70:839–844. https://doi.org/10.1007/s00107-012-0626-7

    Article  Google Scholar 

  35. Westermayr M, Stapel P, Van de Kuilen JW (2018) Tensile strength and stiffness of low quality beech (Fagus sylvatica) sawn timber. In: Proceedings of the World Conference on Timber Engineering WCTE, Seul, Rep. of Korea

Download references

Acknowledgements

This study was realized in the framework of the PRIN2015 project (no. 2015YW8JWA) “Short chain in the biomass-wood sector: supply, traceability, certification and carbon sequestration. Innovations for bio-building and energy efficiency”, coordinated by G. Scarascia-Mugnozza. The authors want to thank the companies Pagano Costruzioni in Legno, Domini Legnami Srl, La Foresta Soc. Coop. and Gruppolegno Srl for the strong collaboration and support to the research because of the supplying of the raw material; Paolo Burato, Paolo Pestelli and Graziano Sani for the support during laboratory tests. Dr. Marco Lelli for the support in finding the site and the raw material of the research and the organization of the logistic transport in Monti Simbruini.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Michela Nocetti.

Ethics declarations

Conflict of interest

There is no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Brunetti, M., Nocetti, M., Pizzo, B. et al. Structural products made of beech wood: quality assessment of the raw material. Eur. J. Wood Prod. (2020). https://doi.org/10.1007/s00107-020-01542-9

Download citation