Abstract
In this work, CCA-treated wooden utility poles were removed from the electricity distribution network and characterized in detail. The pole was split in different ratios of sapwood to heartwood. The characterization was performed through constituent, proximate, and ultimate analysis via X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and inductively coupled plasma atomic emission spectroscopy (ICP-OES). The results demonstrate the differences in the chemical composition of the fractions, especially concerning the amounts of extractives and holocellulose. The FTIR spectra contain the characteristic absorption bands of wood fibers. As shown by the ICP-OES measurements, the gradient of metal concentrations is steep in the radial direction of the pole, tending to zero at the centerline. The XRD measurements reveal that the external sapwood parameters increased because of the lack of chain mobility and crosslinking, which is promoted by the presence of metals. The TGA measurements of the samples of the external pole fraction show initial degradation temperatures similar to those reported for samples with high metal concentrations, while the core samples show a behavior similar to untreated wood. Consequently, the external pole fraction must be treated and disposed of correctly. The low concentration of metals in the internal fractions allows them to be used in conventional biomass processes.
Similar content being viewed by others
References
Akerholm M, Hinterstoisser B, Salmén L (2004) Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy. Carbohydr Res 339:569–578. https://doi.org/10.1016/j.carres.2003.11.012
Bianchi O, Castel CD, Oliveira RVB de, Bertuoli PT, Hillig E (2010) Nonisothermal degradation of wood using thermogravimetric measurements. Polímeros 20:395–400
Choi YS, Kim JJ, Kim MJ, Imamura Y, Yoshimura T, Kim GH (2012) Fungal biodegradation of CCA-treated wood and removal of its metal components. Chemosphere 88:725–729. https://doi.org/10.1016/j.chemosphere.2012.03.062
Coudert L, Blais JF, Mercier G, Cooper P, Janin A, Gastonguay L (2014) Demonstration of the efficiency and robustness of an acid leaching process to remove metals from various CCA-treated wood samples. J Environ Manag 132:197–206. https://doi.org/10.1016/j.jenvman.2013.11.028
Couhert C, Commandré J-M, Salvador S (2009) Failure of the component additivity rule to predict gas yields of biomass in flash pyrolysis at 950 °C. Biomass Bioenerg 33:316–326. https://doi.org/10.1016/j.biombioe.2008.07.003
Cuypers F, Helsen L (2011) Pyrolysis of chromated copper arsenate (CCA) treated wood waste at elevated pressure: influence of particle size, heating rate, residence time, temperature and pressure. J Anal Appl Pyrolysis 92:111–122. https://doi.org/10.1016/j.jaap.2011.05.002
Elyounssi K, Collard F, Mateke J, Blin J (2012) Improvement of charcoal yield by two-step pyrolysis on eucalyptus wood: a thermogravimetric study. Fuel 96:161–167. https://doi.org/10.1016/j.fuel.2012.01.030
Ferrarini SF, Dos Santos HS, Miranda LG, Azevedo CMN, Maia SM, Pires M (2016) Decontamination of CCA-treated eucalyptus wood waste by acid leaching. Waste Manag 49:253–262. https://doi.org/10.1016/j.wasman.2016.01.031
Fu Q, Argyropoulos DS, Tilotta DC, Lucia LA (2008) Understanding the pyrolysis of CCA-treated wood. J Anal Appl Pyrolysis 81:140–144. https://doi.org/10.1016/j.jaap.2008.02.007
Gress JK, Lessl JT, Dong X, Ma LQ (2014) Assessment of children’s exposure to arsenic from CCA-wood staircases at apartment complexes in Florida. Sci Total Environ 476–477:440–446. https://doi.org/10.1016/j.scitotenv.2014.01.018
Gress J, de Oliveira LM, da Silva EB, Lessl JM, Wilson PC, Townsend T, Ma LQ (2015) Cleaning-induced arsenic mobilization and chromium oxidation from CCA-wood deck: potential risk to children. Environ Int 82:35–40
Gress J, da Silva EB, de Oliveira LM et al (2016) Potential arsenic exposures in 25 species of zoo animals living in CCA-wood enclosures. Sci Total Environ 551–552:614–621. https://doi.org/10.1016/j.scitotenv.2016.02.065
Guerrero M, Ruiz MPP, Alzueta MUU, Bilbao R, Millera A (2005) Pyrolysis of eucalyptus at different heating rates: studies of char characterization and oxidative reactivity. J Anal Appl Pyrolysis 74:307–314. https://doi.org/10.1016/j.jaap.2004.12.008
Guo X, Wang S, Wang K, Liu Q, Luo Z-y (2010) Influence of extractives on mechanism of biomass pyrolysis. J Fuel Chem Technol 38:42–46. https://doi.org/10.1016/S1872-5813(10)60019-9
Haynes WM (2014) CRC handbook of chemistry and physics, 95th Edition,CRC Press Boca Raton 2014–2015
Helsen L, Van den Bulck E (1998) The microdistribution of copper, chromium and arsenic in CCA treated wood and its pyrolysis residue using energy dispersive X-ray analysis in scanning electron microscopy. Holzforschung 52:607–614
Helsen L, Van den Bulck E (2000) Kinetics of the low-temperature pyrolysis of chromated copper arsenate-treated wood. J Anal Appl Pyrolysis 53:51–79. https://doi.org/10.1016/S0165-2370(99)00050-9
Helsen L, Van den Bulck E (2005) Review of disposal technologies for chromated copper arsenate (CCA) treated wood waste, with detailed analyses of thermochemical conversion processes. Environ Pollut 134:301–314. https://doi.org/10.1016/j.envpol.2004.07.025
Helsen L, Bulck E, Van Den Bulck E, Hery JS (1998) Total recycling of CCA treated wood waste by low-temperature pyrolysis. Waste Manag 18:571–578. https://doi.org/10.1016/S0956-053X(98)00148-2
Helsen L, Van den Bulck E, Mullens S, Mullens J (1999) Low-temperature pyrolysis of CCA-treated wood: thermogravimetric analysis. J Anal Appl Pyrolysis 52:65–86. https://doi.org/10.1016/S0165-2370(99)00034-0
Hopp L, Nico PS, Marcus MA, Peiffer S (2008) Arsenic and chromium partitioning in a podzolic soil contaminated by chromated copper arsenate. Environ Sci Technol 42:6481–6486. https://doi.org/10.1021/es800615f
Howell C, Hastrup A, Jellison J (2007) The use of X-ray diffraction for analyzing biomodification of crystalline cellulose by wood decay fungi. In: International research group on wood preservation: 38th annual meeting, 2007, Section Biology, IRG
Janin A, Blais J-F, Mercier G, Drogui P (2009) Optimization of a chemical leaching process for decontamination of CCA-treated wood. J Hazard Mater 169:136–145. https://doi.org/10.1016/j.jhazmat.2009.03.064
Janin A, Coudert L, Riche P, Mercier G, Cooper P, Blais JF (2011) Application of a CCA-treated wood waste decontamination process to other copper-based preservative-treated wood after disposal. J Hazard Mater 186:1880–1887. https://doi.org/10.1016/j.jhazmat.2010.12.094
Kabir MJ, Chowdhury AA, Rasul MG (2015) Pyrolysis of municipal green waste: a modelling, simulation and experimental analysis. Energies 8:7522–7541. https://doi.org/10.3390/en8087522
Kakitani T, Hata T, Kajimoto T, Imamura Y (2004) Two possible pathways for the release of arsenic during pyrolysis of chromated copper arsenate (CCA)-treated wood. J Hazard Mater 113:247–252. https://doi.org/10.1016/j.jhazmat.2004.05.029
Kartal SN (2003) Removal of copper, chromium, and arsenic from CCA-C treated wood by EDTA extraction. Waste Manag 23:537–546
Kartal SN, Terzi E, Yilmaz H, Goodell B (2015) Bioremediation and decay of wood treated with ACQ, micronized ACQ, nano-CuO and CCA wood preservatives. Int Biodeterior Biodegrad 99:95–101. https://doi.org/10.1016/j.ibiod.2015.01.004
Kim U-J, Eom SH, Wada M (2010) Thermal decomposition of native cellulose: influence on crystallite size. Polym Degrad Stab 95:778–781. https://doi.org/10.1016/j.polymdegradstab.2010.02.009
Kim J-Y, Kim T-S, Eom I-Y et al (2012) Characterization of pyrolytic products obtained from fast pyrolysis of chromated copper arsenate (CCA)- and alkaline copper quaternary compounds (ACQ)-treated wood biomasses. J Hazard Mater 227–228:445–452. https://doi.org/10.1016/j.jhazmat.2012.05.052
Kim KH, Kim T-S, Lee S-M, Choi D, Yeo H, Choi I-G, Choi JW (2013) Comparison of physicochemical features of biooils and biochars produced from various woody biomasses by fast pyrolysis. Renew Energy 50:188–195. https://doi.org/10.1016/j.renene.2012.06.030
Kinata SE, Loubar K, Bouslamti A, Belloncle C, Tazerout M (2012) Influence of impregnation method on metal retention of CCB-treated wood in slow pyrolysis process. J Hazard Mater 233–234:172–176. https://doi.org/10.1016/j.jhazmat.2012.07.011
Kinata SE, Loubar K, Paraschiv M, Bouslamti A, Belloncle C, Tazerout M (2013) Slow pyrolysis of CCB-treated wood for energy recovery: influence of chromium, copper and boron on pyrolysis process and optimization. J Anal Appl Pyrolysis 104:210–217. https://doi.org/10.1016/j.jaap.2013.08.002
Ko C-H, Chen P-J, Chen S-H, Chang FC, Lin FC, Chen KK (2010) Extraction of chromium, copper, and arsenic from CCA-treated wood using biodegradable chelating agents. Bioresour Technol 101:1528–1531. https://doi.org/10.1016/j.biortech.2009.07.027
Koo W-M, Jung S-H, Kim J-S (2014) Production of bio-oil with low contents of copper and chlorine by fast pyrolysis of alkaline copper quaternary-treated wood in a fluidized bed reactor. Energy 68:555–561. https://doi.org/10.1016/j.energy.2014.02.020
Kumar G, Panda AK, Singh R (2010) Optimization of process for the production of bio-oil from eucalyptus wood. J Fuel Chem Technol 38:162–167. https://doi.org/10.1016/S1872-5813(10)60028-X
Lengowski EC, Muniz de GIB, Nisgoski S, Magalhães WLE (2013) Cellulose acquirement evaluation methods with different degrees of crystallinity. Sci For 41:185–194
Lopes GH, Junges J, Fiorio R, Zeni M, Zattera AJ (2012) Thermoplastic polyurethane synthesis using POSS as a chain modifier. Mater Res 15:698–704. https://doi.org/10.1590/S1516-14392012005000085
Mercer TG, Frostick LE (2014) Evaluating the potential for environmental pollution from chromated copper arsenate (CCA)-treated wood waste: a new mass balance approach. J Hazard Mater 276:10–18. https://doi.org/10.1016/j.jhazmat.2014.05.006
Moghaddam AH, Mulligan CN (2008) Leaching of heavy metals from chromated copper arsenate (CCA) treated wood after disposal. Waste Manag 28:628–637. https://doi.org/10.1016/j.wasman.2007.03.009
Nanseu-Njiki C-P, Alonzo V, Bartak D, Ngameni E, Darchen A (2007) Electrolytic arsenic removal for recycling of washing solutions in a remediation process of CCA-treated wood. Sci Total Environ 384:48–54. https://doi.org/10.1016/j.scitotenv.2007.04.043
Nico PS, Fendorf SE, Lowney YW, Holm SE, Ruby MV (2004) Chemical structure of arsenic and chromium in CCA-treated wood: implications of environmental weathering. Environ Sci Technol 38:5253–5260. https://doi.org/10.1021/es0351342
Nzihou A, Stanmore B (2013) The fate of heavy metals during combustion and gasification of contaminated biomass-a brief review. J Hazard Mater 256–257:56–66. https://doi.org/10.1016/j.jhazmat.2013.02.050
Ohgami N, Yamanoshita O, Thang ND et al (2015) Carcinogenic risk of chromium, copper and arsenic in CCA-treated wood. Environ Pollut 206:456–460. https://doi.org/10.1016/j.envpol.2015.07.041
Pan H, Hse C-Y, Gambrell R, Shupe TF (2009) Fractionation of heavy metals in liquefied chromated copper arsenate 9-treated wood sludge using a modified BCR-sequential extraction procedure. Chemosphere 77:201–206. https://doi.org/10.1016/j.chemosphere.2009.07.037
Poletto M, Dettenborn J, Pistor V, Zeni M, Zattera AJ (2010) Materials produced from plant biomass. Part I: evaluation of thermal stability and pyrolysis of wood. Mater Res 13:375–379
Poletto M, Pistor V, Zeni M, Zattera AJ (2011) Crystalline properties and decomposition kinetics of cellulose fibers in wood pulp obtained by two pulping processes. Polym Degrad Stab 96:679–685. https://doi.org/10.1016/j.polymdegradstab.2010.12.007
Poletto M, Pistor V, Santana RMC, Zattera AJ (2012a) Materials produced from plant biomass: part II: evaluation of crystallinity and degradation kinetics of cellulose. Mater Res 15:421–427. https://doi.org/10.1590/S1516-14392012005000048
Poletto M, Zattera AJ, Forte MMC, Santana RMC (2012b) Thermal decomposition of wood: influence of wood components and cellulose crystallite size. Bioresour Technol 109:148–153. https://doi.org/10.1016/j.biortech.2011.11.122
Popescu C-M, Singurel G, Popescu M-C, Vasile C, Argyropoulos DS, Willför S (2009) Vibrational spectroscopy and X-ray diffraction methods to establish the differences between hardwood and softwood. Carbohydr Polym 77:851–857. https://doi.org/10.1016/j.carbpol.2009.03.011
Popescu M-C, Popescu C-M, Lisa G, Sakata Y (2011) Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods. J Mol Struct 988:65–72. https://doi.org/10.1016/j.molstruc.2010.12.004
Radivojevic S, Cooper PA (2010) The effects of wood species and treatment retention on kinetics of CCA-C fixation reactions. Wood Sci Technol 44:269–282. https://doi.org/10.1007/s00226-009-0277-y
Rowell R (2005) Handbook of wood chemistry and wood composites. CRC Press Boca Raton
Shebani AN, van Reenen AJ, Meincken M (2008) The effect of wood extractives on the thermal stability of different wood species. Thermochim Acta 471:43–50. https://doi.org/10.1016/j.tca.2008.02.020
Shebani AN, van Reenen AJ, Meincken M (2009) The effect of wood extractives on the thermal stability of different wood-LLDPE composites. Thermochim Acta 481:52–56. https://doi.org/10.1016/j.tca.2008.10.008
Song XD, Xue XY, Chen DZ, He PJ, Dai XH (2014) Application of biochar from sewage sludge to plant cultivation: influence of pyrolysis temperature and biochar-to-soil ratio on yield and heavy metal accumulation. Chemosphere 109:213–220. https://doi.org/10.1016/j.chemosphere.2014.01.070
Telmo C, Lousada J (2011) The explained variation by lignin and extractive contents on higher heating value of wood. Biomass Bioenerg 35:1663–1667. https://doi.org/10.1016/j.biombioe.2010.12.038
Terinte N, Ibbett R, Schuster KC (2011) Overview on native cellulose and microcrystalline cellulose I structure studied by X-ray diffraction (Waxd): comparison between measurement techniques. Lenzing Berichte 89:118–131. https://doi.org/10.1163/156856198X00740
Usman ARA, Lee SS, Awad YM, Lim KJ, Yang JE, Ok YS (2012) Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea. Chemosphere 87:872–878. https://doi.org/10.1016/j.chemosphere.2012.01.028
Wada M, Okano T (2001) Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments. Cellulose 8:183–188. https://doi.org/10.1023/A:1013196220602
Wasson SJ, Linak WP, Gullett BK et al (2005) Emissions of chromium, copper, arsenic, and PCDDs/Fs from open burning of CCA-treated wood. Environ Sci Technol 39:8865–8876. https://doi.org/10.1021/es050891g
Acknowledgements
The authors would like to thank the CPFL for financing the project entitled: PA0037—High Tech Matrix for Reuse and Clean Disposal; to the National Council for Scientific and Technological Development (CNPq no 161524/2015-0) and Higher Education Personnel Improvement Coordination (CAPES), for providing the scholarships; and, the University of Caxias do Sul (UCS).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Junges, J., Perondi, D., Ferreira, S.D. et al. Multi-technique characterization of chromated copper arsenate-treated wooden utility poles from the Brazilian electricity network. Eur. J. Wood Prod. 77, 279–291 (2019). https://doi.org/10.1007/s00107-018-1374-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-018-1374-0