Abstract
The work deals with Poisson’s ratios (PR’s) of medium density fiberboard (MDF) measured using digital image correlation and correlated to vertical density profiles (VDP). MDFs of four different thicknesses were first scanned by X-ray to obtain VDPs and then subjected to compression while measuring by DIC. PR’s of MDF reveal low correlations with VDP (<0.08), but strong local behavior ranging from 0.025 to 0.06 for 12 mm thickness, from 0.018 to 0.105 for 18 mm, from 0.03 to 0.175 for 25 mm, and from 0 to 0.43 for 38 mm.
Similar content being viewed by others
References
Ganev S, Gendron G, Cloutier A, Beauregard R (2005) Mechanical properties of MDF as a function of density and moisture content. Wood Fiber Sci 37(2):314–326
Greaves GN, Greer AL, Lakes RS, Rouxel T (2011) Poisson’s ratio and modern materials. Nat Mater 10:823–837
Hunt MO, Suddarth SK (1974) Prediction of elastic constants of particleboard. For Prod J 24(8):52–57
Kelly MW (1977) Critical literature review of relationships between processing parameters and physical properties of particleboard. Gen. Tech. Rep. FPL-10. Forest Products Laboratory. Forest Service. US Department of Agriculture. USA, p 66
Moarcas O, Irle M (1999) Determination of Poisson’s ratio for particleboard in pure bending. Wood Sci Technol 33:439–444
Pavlekovics A, Niemz P, Sonderegger W, Molnar S (2008) Untersuchungen zum Einfluss der Holzfeuchte auf ausgewählte Eigenschaften von Spanplatten und MDF. Holz Roh Werkst 66:99–105
Wang S, Winistorfer PM, Young TM, Helton C (2001) Step-closing pressing of medium density fibreboard. Part 2. Influences on panel performance and layer characteristics. Holz Roh Werkst 59:311–318
Wilczyński A, Kociszewski M (2012) Elastic properties of the layers of three-layer particleboards. Eur J Wood Prod 70:357–359
Yoshihara H (2011) Measurement of the young’s modulus and shear modulus of in-plane quasi-isotropic medium-density fiberboard by flexural vibration. Bioresources 6(4):4871–4885
Acknowledgments
This work was carried out with the help of the internal grant agency of Mendel University in Brno (project no. 39/2012) and by the European Social Fund and the state budget of the Czech Republic, project “The Establishment of an International Research Team for the Development of New Wood-based Materials” reg. no. CZ.1.07/2.3.00/20.0269 (EE2.3.20.0269).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sebera, V., Tippner, J., Šimek, M. et al. Poisson’s ratio of the MDF in respect to vertical density profile. Eur. J. Wood Prod. 72, 407–410 (2014). https://doi.org/10.1007/s00107-014-0780-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-014-0780-1