Abstract
Wood samples from South African pine were subjected to thermal degradation of varying degrees, and their dimensional change as well as changes in cell wall density were determined with a micro CT scanner. It was possible to visualise and quantify those changes and also determine a temperature threshold above which the degradation seemed to be too severe to use this wood for any structural purposes. Below this threshold, however, wood properties changed little and the wood may still be of economic value.
Similar content being viewed by others
References
Forestry South Africa (FSA), http://www.forestry.co.za/, accessed 26.10.2012
Hill CAS (2006) Wood modification. Wiley, Chichester
Meincken M, Smit NH, Steinmann D (2010) Physical properties of burnt timber, with special focus on the drying performance. Eur J Wood Prod 68:455–461
Williamson GB, Black EM (1981) High temperature of forest fires under pines as a selective advantage over oaks. Nature 293:643–644
Acknowledgments
The authors wish to thank the National Research Foundation of South Africa for funding for this project (IFR1202200058).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Meincken, M., du Plessis, A. Visualising and quantifying thermal degradation of wood by computed tomography. Eur. J. Wood Prod. 71, 387–389 (2013). https://doi.org/10.1007/s00107-013-0683-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-013-0683-6