Skip to main content
Log in

Einfluss der thermischen Modifikation auf das instationäre Sorptionsverhalten von Fichte (Picea abies (L.) Karst.)

  • KURZORIGINALIA BRIEF ORIGINALS
  • Published:
Holz als Roh- und Werkstoff Aims and scope Submit manuscript

Zusammenfassung

The sorption behaviour of wood is affected clearly by thermal modification processes. Depending on modification temperature and -duration the equilibrium moisture content (EMC) is reduced by up to 50%.

The aim of the investigations was to evaluate the influence of a thermal treatment on the kinetics of the water vapour sorption of spruce (Picea abies (L.) Karst.). In addition the unsteady-state sorption process between two equilibria of humidity was modelled as a diffusion process. After recording the rate of sorption of wood samples using the gravimetric method a water vapour diffusion coefficient of the material could be determined through inverse parameter identification.

The experimental rig for continuous plot of unsteady water absorption permits a simultaneous examination of two wood samples under identical test conditions.

The comparability and repeatability were examined first on twin samples of spruce. Subsequently, comparative investigations on natural and modified twin samples were accomplished.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Literatur

  1. Grothe T (2006) Analyse von instationären Sorptionsvorgängen in modifizierten und unmodifizierten Hölzern und deren Beschreibung durch ein empirisch ermitteltes mathematisches Modell. Diplomarbeit Technische Universität Dresden

  2. Patentschrift AT409184B (2000) Verfahren und Vorrichtung zur Holztrocknung

  3. Pfriem A, Wagenführ A, Ziegenhals G, Eichelberger K (2005) Use of wood performed by heat-treatment for musical instruments. In: Militz H, Hill CAS (Hrsg) Wood modification: Processes, Properties and Commercialisation – The Second European Conference on Wood Modification, Göttingen

  4. Pfriem A, Wagenführ A, Müller M (2005) Ultraleichte Holzfaserplatten als Dämm- und Leichtbauwerkstoff. Tagungsband 5. Internationales Symposium zu “Werkstoffen aus Nachwachsenden Rohstoffen”, Erfurt

  5. Popper R, Niemz P, Eberle G (2005) Untersuchungen zum Sorptions- und Quellungsverhalten von thermisch behandeltem Holz. Holz Roh- Werkst 63:135–148

    Article  CAS  Google Scholar 

  6. Viiri J, Tyrväinen H (1999) A new Method of measuring the Water uptake of wood. Holz Roh- Werkst 57:205–206

    Article  CAS  Google Scholar 

  7. Wagenführ A, Pfriem A, Grothe T, Eichelberger K (2006) Untersuchungen zur vergleichenden Charakterisierung von thermisch modifizierter Fichte für Resonanzdecken von Gitarren. Holz Roh- Werkst 64:313–316

    Article  Google Scholar 

  8. Wienhaus O (1999) Modifizierung des Holzes durch eine milde Pyrolyse – abgeleitet aus den allgemeinen Prinzipien der Thermolyse des Holzes. Wiss Z U Dresden 48:17–22

    CAS  Google Scholar 

  9. Wienhaus O (2005) Chemische änderungen bei der Wärmebehandlung von Holz. Schweiz Z Forstwes 156:427–431

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Alexander Pfriem.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pfriem, A., Grothe, T. & Wagenführ, A. Einfluss der thermischen Modifikation auf das instationäre Sorptionsverhalten von Fichte (Picea abies (L.) Karst.) . Holz Roh Werkst 65, 321–323 (2007). https://doi.org/10.1007/s00107-006-0167-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00107-006-0167-z

Navigation