Abstract
Resin pockets, being an important natural characteristic for wood quality and tree physiology, were observed on the surfaces of boards sawn from four large Norway spruce (Picea abies (L.) Karst.) trees and analysed for size and distribution. Axial length varied between trees and increased from pith to surface and from butt to top; however, three quarters of the variation were random and normally distributed. Also resin pocket frequency varied between trees. Within the stem, the resin pockets remained independent and randomly distributed following the exponential distribution in all three directions: radial, angular and axial, corresponding to a constant probability during the lifespan of the tree. No association between size and frequency was identified. The initiation and the expansion of a resin pocket appear to be controlled by two different physiological processes. The findings should add to the understanding of resin pocket formation in spruce and should be applicable to wood quality
Zusammenfassung
Harzgallen sind für die Holzqualität und Baumphysiologie von großer Bedeutung. An Brettern aus vier großen Fichtenstämmen (Picea abies (L.) Karst.) wurden die Größe und Verteilung von Harzgallen im Stamm untersucht. Die axiale Länge der Harzgallen variierte zwischen den Bäumen. Sie nahm vom Mark zur Rinde sowie im Stamm von unten nach oben zu. Dreiviertel der Streuung war zufällig und normal verteilt. Ebenso unterschied sich die Häufigkeit von Harzgallen zwischen den Bäumen. Im Stamm waren die Harzgallen in radialer, tangentialer und axialer Richtung zufällig nach einer Exponentialverteilung verteilt. Die Häufigkeit verhielt sich innerhalb der gesamten Lebenszeit der Bäume konstant. Es konnte kein Zusammenhang zwischen Größe und Häufigkeit der Harzgallen festgestellt werden. Die Entstehung und die Größe von Harzgallen werden von zwei verschiedenen physiologischen Prozessen gesteuert. Die Ergebnisse sollen zum besseren Verständnis der Bildung von Harzgallen in Fichtenholz beitragen und für die Entwicklung von Holzqualitätsmodellen verwendbar sein.
Similar content being viewed by others
References
Christiansen E, Kucera B (1999) Resin pockets in Norway spruce wood are not caused by the bark beetle Ips typographus. Rapport fra skogforskningen – supplement 12, Ås, p 9
EN 942 (1996) Timber in joinery – General classification of timber quality. European Standard
Freund JE (1992) Mathematical Statistics. Prentice Hall, Upper Saddle River, New Jersey
Gjerdrum P (2001) Knots and resin pockets in spruce timber evaluated by factor analysis. In: Birkeland R (ed) Wood Properties for Industrial Uses. Proceedings 4th Meeting COST E10, AFOCEL/Bordeaux, pp 80–82
Gjerdrum P, Arrighetti G, Bernabei M (2004) Le tasche di resina nel legno di abete rosso. Sherwood 103:39–42
Hagman O, Nyström J (2003) Resin pockets detection on surfaces and in 3-d volumes of Norway spruce. In: Niel A, Rinnhofer A (eds) Proceedings IWSS 5th International Conference. Joanneum Research/Bad Waltersdorf, pp 171–176
Herb M, Becker G (2006) Verteilung und Häufigkeit von Harzgallen im Holz der Fichte (Picea abies (L.) Karst.). Holz Roh- Werkst 64:150–156
ImageTool (2002) UTHSCSA ImageTool Version 3.0 http://ddsdx.uthscsa.edu/dig/itdesc.html
Larson PR (1994) The vascular cambium: development and structure. Springer Verlag, Berlin
Oja J, Temnerud T (1999) The appearance of resin pockets in CT-images of Norway spruce (Picea abies (L.) Karst.). Holz Roh- Werkst 57:400–406
Reck P (2002) Das Baumwachstum von kronenspannungsfrei gewachsenen Fichten (Picea abies (L.) Karst.) unter besonderer Berücksichtigung der holztechnologischen Eigenschaften. Doctoral thesis. http://www.freidok.uni-freiburg.de/volltexte/639/pdf/dissertation_reck.pdf
Schumacher P, Tratzmiller M, Grosser D (1997) Beeinträchtigung der Qualität von Fichtenholz durch Harzgallen in Abhängigkeit von der Durchforstungsintensität. Holz Roh- Werkst 55:254
Seeling U, Reck P, Becker G, Bücking M (2004) Zur Qualität von Furnieren und Schnitthölzern, hergestellt aus geasteten, langkronigen und stark dimensionierten Fichten. Forst Holz 59:63–68
Sklett K (1998) Undersøkelse av kvaelommer i skurtømmer hos Van Severen. Forestia FoU-rapport 1-98, Namsos/Sokna, p 20, ISSN 15-1237
StatSoft (2004) Electronic Statistics Textbook 6.1. http://www.statsoft.com
Temnerud E (1996) Pitch pockets in Picea abies: Variation in Amount, Number and Size Within Trees and Within a Stand. Scand J For Res 11:164–173
Temnerud E (1997) Formation and prediction of resin pockets in Picea abies ((L.) Karst.) Doctoral thesis, Acta Universitatis Agriculturae Sueciae, p 56
Temnerud E (1999) The Occurrence of Resin Pockets in Sawlog Populations of Picea abies (L.) Karst. from Five Geographic Regions in Sweden. Scand J For Res 14:143–155
Temnerud E, Valinger E, Sundberg B (1999) Induction of Resin Pockets in eedlings of Pinus sylvestris L. by Mechanical Bending Stress during Growth. Holzforschung 53:386–390
ThermoWood ® (2005) Properties. http://www.thermowood.fi
Tsoumis G (1991) Science and Technology of Wood – Structure, Properties, Utilisation. Chapman & Hall, New York
Wernsdörfer H, Reck P, Seeling U (2002) Mapping and predicting resin pockets in stems of Norway spruce (Picea abies (L.) Karst.). In: Nepveu G (ed) Proceedings fourth IUFRO Wood Quality Modelling Workshop, LERFoB/Nancy, pp 68–77
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gjerdrum, P., Bernabei, M. Three-dimensional model for size and location of resin pockets in stems of Norway spruce . Holz Roh Werkst 65, 201–208 (2007). https://doi.org/10.1007/s00107-006-0158-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-006-0158-0