Abstract
The new classification system for the reaction to fire performance of building products in Europe has been applied to five different product families of wood: Wood-based panels, Structural timber, Glued laminated timber, Solid wood panelling and cladding and Wood flooring as being ‘products with known and stable fire performance’. The European classification system includes two sub-systems, one main system for all construction products except floorings and the other for flooring products. Wood properties such as density, thickness, joints and types of end use application including different substrates have been studied thoroughly and are included in the classification. Most wood products fall in classes D-s2, d0 or Dfl-s1 (for floorings). Testing has been performed according to EN 13823 (2002) SBI- Single Burning Item test, EN ISO 9239-1 (2002) Radiant panel test, and EN ISO 11925-2 (2002) Small flame test. In all, more than one hundred wood products in different end use applications have been studied. Clear relationships between the main Euroclass fire performance parameters and product parameters (such as density and thickness) have been demonstrated. Tables with reaction to fire classification of different wood products and end use applications have been developed, approved by the European Commission and published in their Official Journal. This procedure is ongoing with further official decisions to be published.
Zusammenfassung
Das neue europäische Klassifizierungssystem zum Brandverhalten von Bauprodukten gilt für die fünf Produktgruppen Holzwerkstoffe, Bauholz, Brettschichtholz, Wand- und Deckenbekleidungen aus Massivholz sowie Holzfußböden, die als “Produkte mit bekanntem und abschätzbarem Brandverhalten” gelten. Das europäische Klassifizierungssystem wird in zwei Kategorien unterteilt: eine Hauptkategorie für alle Bauprodukte mit Ausnahme von Bodenbelägen und eine Kategorie für Bodenbeläge. Holzeigenschaften, wie zum Beispiel Rohdichte, Dicke, Verbindungen und Anwendungsarten einschließlich verschiedener Trägerplatten wurden eingehend untersucht und in die Klassifizierung einbezogen. Die meisten Holzprodukte werden den Klassen D-s2, d0 oder Dfl-s1 (Fußböden) zugeordnet. Prüfungen erfolgten nach den Normen EN 13823 (2002) thermische Beanspruchung durch einen einzelnen brennenden Gegenstand, EN ISO 9239-1 (2002) Brandverhalten bei Beanspruchung mit einem Wärmestrahler und EN ISO 11925-2 (2002) Entzündbarkeit von Bauprodukten bei direkter Flammeneinwirkung. Insgesamt wurden über einhundert Holzprodukte in unterschiedlichen praktischen Anwendungsarten untersucht. Eindeutige Zusammenhänge zwischen den Hauptparametern zum Brandverhalten nach der Euroklasse und den Produktparametern (wie zum Beispiel Rohdichte und Dicke) wurden dargestellt. Tabellen mit der Klassifizierung des Brandverhaltens verschiedener Holzprodukte und Endanwendungen wurden erstellt, von der Europäischen Kommission genehmigt und in deren Amtsblatt veröffentlicht. Dieses Verfahren dauert noch an. Die Veröffentlichung weiterer amtlicher Entscheidungen steht noch aus.
Similar content being viewed by others
References
CONSTRUCT 01/491 rev 3 (2004) Classification of products of known and stable performance – Procedural aspects
COMMISSION DECISION of 8 February 2000 implementing Council Directive 89/106/EEC as regards the classification of the reaction to fire performance of construction products. Off J Eur Commun 23.2.2000
COMMISSION DECISION of 17 January 2003 establishing the classes of reaction-to-fire performance of certain construction products. Off J Eur Commun 18.1.2003
COMMISSION DECISION of 7 August 2003 amending Decision 2003/43/ EC establishing the classes of reaction-to-fire performance of certain construction products. Off J Eur Union 8.8.2003
COMMISSION DECISION of 9 August 2005 establishing the classes of reaction-to-fire performance of certain construction products. Off J Eur Union 11.8.2005
CWFT doc 062 (2004) case report for Solid wood panelling and cladding, rev 6. October 2004
CWFT doc 061 (2004) case report for Wood floorings, rev 8. December 2004
EN 13823 (2002) Reaction to fire tests for building products – Building products excluding floorings – exposed to the thermal attack by a single burning item. SBI test
EN ISO 11925-2 (2002) Reaction to fire tests for building products – Ignitability of building products subjected to direct impingement of flame – Part 2: Single-flame source test
EN ISO 9239-1 (2002) Reaction to fire tests for floor coverings – Part 1: Determination of the burning behaviour using a radiant heat source
EN 13501-1 (2002) Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests
EN 13238 (2001) Reaction to fire tests for building products – Conditioning procedures and general rules for selection of substrates
Östman B, Nussbaum R (1987) National standard fire tests in small-scale compared with the full-scale ISO room test. Trätek Report I 8702017
Östman B, Mikkola E (2004) European classes for the reaction to fire of wood products (excluding floorings). Trätek Report I 0411025
Tsantaridis L, Östman B (2004) European classes for the reaction to fire of wood floorings. Trätek Report I 0411026
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Östman, BL., Mikkola, E. European classes for the reaction to fire performance of wood products. Holz Roh Werkst 64, 327–337 (2006). https://doi.org/10.1007/s00107-006-0116-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-006-0116-x