Abstract
Acetals such as methylal and ethylal are shown to be particularely effective additives in improving strenth of wood boards bonded with melamine-urea-formaldehyde a(MUF) resins and they show some appreciable effect on other resins, too, particularely PF resins. The thermomechanical analysis and laboratory particleboard results reported show that acetals allow a considerable decrease in resin loading, and thus for MUFs also in melamine content, on the bonded wood panel and this at parity of performance.
Zusammenfassung
Acetale wie Methylal und Ethylal erwiesen sich als besonders effektive Kleberzusätze. Sie erhöhen die Festigkeit von Platten, die mit MUF-Harzen gebunden sind. Sie zeigen auch bei anderen Harzen einen wünschenswerten Effekt, vor allem bei PF-Harzen. Thermomechanische Analysen und Ergebnisse der Herstellung von Laborplatten werden vorgestellt. Sie zeigen, daß Acetale eine erhebliche Verringerung der Harzanteile in den gebundenen Platten ermöglichen, und daß für MUF-Harze auch der Melamin-Anteil gesenkt werden kann, und dies bei gleichbleibender Festigkeitsqualität.
Similar content being viewed by others
References
Garcia R, Pizzi A (1997) Cross-linked and entanglement networks in thermomechanical analysis of polycondensation resins. J Appl Polymer Sci 70(6):1111–1119
Lambiotte & Co. (1999) Technical data sheet, Brussels
Pizzi A (1994) Advanced wood adhesives technology. Marcel Dekker Inc., New York
Prestifilippo M, Pizzi A, Norback H, Lavisci P (1996) Low addition of melamine salts for improved UF adhesives water resistance. Holz Roh Werkstoff 54(6):393–398
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pizzi, A., Beaujean, M., Zhao, C. et al. Acetals-induced strength increases and lower resin content in MUF and PE wood adhesives. Holz Roh Werkst 61, 419–422 (2003). https://doi.org/10.1007/s00107-003-0429-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-003-0429-y