Abstract
An evaluation procedure, based on simple test methods, was developed in order to assess the compatibility with wood adherents of some new types of structural adhesives.
Zusammenfassung
Ein Bewertungsprozess wurde aufgrund einfacher Testmethoden entwickelt, um die Kompatibilität einiger neuer Typen von Klebern für Bauholz einzuschätzen.
Similar content being viewed by others
References
EN 301 (1993) Adhesives, phenolic and aminoplastic, for load bearing timber structures. Classification and performance requirement
Eurocode 5 (1995) Design of timber structures. Part 1-1: General rules and rules for building
ICOMOS (1999) Principles for the Preservation of Historic Timber Buildings. ICOMOS, Paris, France
Green DW, Winandy JE, Kretschmann DE (1999) Mechanical properties of wood. In: Wood Handbook. FPS Catalogue no. 7269, Forest Prod Soc, Madison WI
Lavisci P, Berti S, Pizzo B, Triboulot P, Zanuttini R (2001a) A shear test for structural adhesives used in the consolidation of old timber. Holz Roh- Werkstoff 59:145–152
Lavisci P, Berti S, Pizzo B, Triboulot P, Zanuttini R (2001b) A delamination test for structural wood adhesives used in thick joints. Holz Roh- Werkstoff 59:153–154
Pizzo B (1999) Compatibilità, durabilità e reversibilità nel restauro delle strutture lignee: diagnosi del degrado, tecniche e materiali per il consolidamento, PhD Thesis, University of Palermo
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pizzo, B., Lavisci, P., Misani, C. et al. The compatibility of structural adhesives with wood. Holz Roh Werkst 61, 288–290 (2003). https://doi.org/10.1007/s00107-003-0384-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-003-0384-7