Article PDF
References
M.W. Barsoum, The MN+1AXN Phass: A new class of solids: Thermodynamically stable nanolaminates, Prog. Sol. State Chem., 28, 201 (2000).
R. Pampuch, J. Lis, L. Stobierski, and M. Tymkiewicz, Solid combustion synthesis of Ti3SiC2, J. Eur. Ceram. Soc., 5, 283 (1989).
M.W. Barsoum and T. El-Raghy, Synthesis and characterization of a remarkable ceramic: Ti3SiC2, J. Am. Ceram. Soc. 79, 1953 (1996).
T. El-Raghy, M.W. Barsoum, A. Zavaliangos, and S.R. Kalidindi, Processing and mechanical properties of Ti3SiC2: II, effect of grain size and deformation temperature, J. Am. Ceram. Soc. 82, 2855 (1999).
T. El-Raghy, A. Zavaliangos, M.W. Barsoum, and S.R. Kalidindi, Damage mechanisms around hardness indentations in Ti3SiC2, J. Am. Ceram. Soc. 80, 513 (1997).
C.J. Gilbert, D.R. Bloyer, M.W. Barsoum, T. El-Raghy, A.P. Tomsia, and R.O. Ritchie, Fatigue-crack growth and fracture properties of coarse and fine-grained Ti3SiC2, Scr. Mater. 42, 761 (2000).
M. Radovic, M.W. Barsoum, T. El-Raghy, and S. Wiederhorn, Tensile creep of fine-grained (3-5 μm) Ti3SiC2 in the 1000–1200 °C temperature range, Acta Mater. 49, 4103 (2001).
I.M. Low, S.K. Lee, B. Lawn, and M.W. Barsoum, Contact damage accumulation in Ti3SiC2, J. Amer. Ceram. Soc. 81, 225 (1998).
Y. Kuroda, I.M. Low, M.W. Barsoum, and T. El-Raghy, Indentation responses and damage characteristics of hot isostatically pressed Ti3SiC2, J. Aust. Ceram. Soc. 37, 95 (2001).
M.W. Barsoum and T. El-Raghy, Room temperature ductile carbides, Met. Mater. Trans. 30 A, 363 (1999).
L. Farber, I. Levin, and M.W. Barsoum, HRTEM study of a lowangle boundary in plastically deformed Ti3SiC2, Philos. Mag. Lett. 79, 4103 (1999).
M.W. Barsoum, L. Farber, and T. El-Raghy, Dislocations, kink banks and room temperature plasticity of Ti3SiC2, Met. Mat. Trans. 30A, 1727 (1999).
M.W. Barsoum, M. Radovic, P. Finkel, and T. El-Raghy, Ti3SiC2 and ice, Appl. Phys. Lett. 79, 479 (2001).
M.W. Barsoum, T. Zhen, S. Kalidindi, M. Radovic, and A. Murugaiah, Fully reversible dislocation-based compression deformation of Ti3SiC2 to 1 GPa, Nat. Mater. 2, 107 (2003).
B.L. Adams, Orientation imaging microscopy: Emerging and future applications, Ultramicroscopy 67, 11 (1997).
D.P. Field, Recent advances in the application of orientation imaging, Ultramicroscopy 67, 1 (1997).
B.J. Kooi, R.J. Poppen, N.J.M. Carvalho, J.Th.M. De Hosson, and M.W. Barsoum, Ti3SiC2: A damage tolerant ceramic studied with nano-indentations and transmission electron microscopy, Acta. Mater. 51, 2859 (2003).
D. Tabor, Hardness of Metals (Clarendon Press, Oxford, U.K., 1951).
B.R. Lawn, N.P. Padture, H. Cai, and F. Guiberteau, Making ceramics “ductile”, Science 263, 1114 (1994).
F. Guiberteau, N.P. Padture, and B.R. Lawn, Effect of grain size on hertzian contact damage in alumina, J. Am. Ceram. Soc. 77, 1825 (1994).
J.S. Field and M.V. Swain, The indentation characterization of the mechanical properties of various carbon materials: Glassy carbon, coke, and pyrolytic Graphite, Carbon 34, 1357 (1996).
M.V. Swain and J.S. Field, Investigations of the mechanical properties of two glassy carbon materials using pointed indenters, Philos. Mag. A. 74, 1085 (1996)
M.V. Swain, Mater. Sci. Eng. Mechanical property characterization of small volumes of brittle materials with spherical tipped indenters, A253, 160 (1998).
A.C. Fischer-Cripps, A review of analysis methods for sub-micron indentation testing, Vacuum 58, 569 (2000).
N. Iwashita, M.V. Swain, J.S. Field, N. Ohta, and S. Bitoh, Elasto-plastic deformation of glass-like carbons heat-treated at different temperatures, Carbon 39, 1525 (2001).
M. Sakai, Y. Nakano, and S. Shimizu, Elastoplastic indentation on heat-treated carbons, J. Am. Ceram. Soc. 85, 1522 (2002).
B. Holm, R. Ahuja, and B. Johansson, Ab initio calculations of the mechanical properties of Ti3SiC2, Appl. Phys. Lett. 79, 1450 (2001).
M.W. Barsoum, T. El-Raghy, C.J. Rawn, W.D. Porter, A. Payzant and, C. Hubbard, Thermal properties of Ti3SiC2, J. Phys. Chem. Solids 60, 429 (1999).
F.C. Frank and A.N. Stroh, On the theory of kinking, Proc. Phys. Soc. 65, 811 (1952).
J.M. Molina-Aldareguia, J. Emmerlich, J. Palmquist, U. Jansson, and L. Hultman, Kink formation around indents in laminated Ti3SiC2 thin films studied in the nanoscale, Scri. Mater. 49, 155 (2003).
M.W. Barsoum, A. Murugaiah, S.R. Kalidindi, and Y. Gogotsi, Kink bands, nonlinear elasticity and nanoindentations in graphite, (accepted for publication in Carbon).
M.W. Barsoum, A. Murugaiah, S.R. Kalidindi, and T. Zhen, Kinking nonlinear elastic solids, nanoindentations and geology, (submitted to Physical Review Letters).
S. Myhra, J.W.B. Summers and E.H. Kisi, Ti3SiC2—A layered ceramic exhibiting ultra-low friction, Mater. Let. 39, 6 (1999).
K.L. Johnson, Indentation Contact Mechanics (Cambridge University Press, Cambridge, 1985).
Author information
Authors and Affiliations
Additional information
The online version of the original article can be found at https://doi.org/10.1557/JMR.2004.0148
Rights and permissions
About this article
Cite this article
Murugaiah, A., Barsoum, M.W., Kalidindi, S.R. et al. Erratum: Spherical nanoindentations and kink bands in Ti3SiC2. Journal of Materials Research 19, 2194–2203 (2004). https://doi.org/10.1007/BF03548933
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03548933