Abstract
In this research, light-weight magnesium stabilized zirconia (MgSZ) refractories were prepared by a casting process using polystyrene spheres (PS) and sawdust as pore former materials and polyvinyl alcohol solution as binder. The effects of the addition and size of the polystyrene spheres on the properties of light-weight refractories were studied. With the total addition of 12 mass-% content of PS, with a size ratio of (1–1.5 mm):(0.2–0.5 mm) = 3:7, the bulk density and compressive strength of the light-weight porous MgSZ refractory samples were 0.79 g/cm3 and 2.6 MPa, which are suitable for the requirements of industrial applications.
Similar content being viewed by others
References
Koh, Y.H., Lee, E.J., Yoon, B.H., et al.: Effect of polystyrene addition on freeze casting of ceramic/camphene slurry for ultra-high porosity ceramics with aligned pore channels. J. Am. Ceram. Soc. 89 (2006) [12] 3646–3653
Taheri, M., Mazaheri, M., Golestani-Fard, F., et al.: High/room temperature mechanical properties of 3Y-TZP/CNTs composites. Ceram. Int. 40 (2014) [2] 3347–3352
Nait-Al, I.B., Danglade, C., Smith. D.S., et al.: Effect of humidity on the thermal conductivity of porous zirconia ceramics. J. Europ. Ceram. Soc. 33 (2013) [13] 2565–2571
Hemberger, Y., Berthold, C., Nickel, K.G.: Wetting and corrosion of yttria stabilized zirconia by molten slags. J. Europ. Ceram. Soc. 32 (2012) [11] 2859–2866
Carbajal, G.I., Galicia, J.L., Ángeles, J.C., et al.: Microstructure and mechanical behavior of alumina-zirconia-mullite refractory materials. Ceram. Int. 38 (2012) [2] 1617–1625
Kessman, A.J., Ramji, K., Morris, N.J., et al.: Zirconia sol-gel coatings on alumina-silica refractory material for improved corrosion resistance. Surface and Coatings Technol. 204 (2009) [4] 477–483
Mattoni, M.A., Yang, J.Y., Levi, C.G., et al.: Effects of matrix porosity on the mechanical properties of a porous-matrix, all-oxide ceramic composite. J. Am. Ceram. Soc. 84 (2001) [11] 2594–2602
Eom, J.H., Kim, Y.W., Song, I.H., et al.: Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates. J. Europ. Ceram. Soc. 28 (2008) [5] 1029–1035
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tang, C., Huang, Z.H., Fang, M.H. et al. Preparation and Mechanical Properties of Light-Weight Porous Magnesium Stabilized Zirconia Refractories. Interceram. - Int. Ceram. Rev. 63, 295–297 (2014). https://doi.org/10.1007/BF03401074
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03401074