Kurzfassung
Im Rahmen der Entwicklung wurde die keramische Mehrlagentechnologie (MLC) und der Keramikspritzguss (CIM) für die Herstellung neuartiger funktionaler keramischer Komponenten kombiniert. Im ersten Schritt wurde auf Basis der MLC-Technologie ein funktionalisiertes grünkeramisches Laminat aus LTCC-Keramik hergestellt. Das gefertigte Laminat wurde danach in ein Spritzgießwerkzeug eingelegt und durch Einspritzen eines LTCC-Feedstocks um dreidimensionale Strukturen erweitert, entbindert und gesintert. Auf Basis der entwickelten Technologieplattform wurden Demonstratoren (Drucksensoren) mit integrierter elektrischer bzw. sensorischer Funktion hergestellt.
Abstract
Multilayer Ceramic Technology and Ceramic Injection Moulding — A Technological Combination for the Manufacturing of 3D Functional Ceramic Components
For the manufacturing of novel functional ceramic components Ceramic Multilayer Technology (MLC) und Ceramic Injection Moulding (CIM) were combined. In a first step a functionalized green ceramic laminate was manufactured from LTCC-ceramics by MLC technology. The manufactured laminate was afterwards inserted in an injection moulding tool, enhanced with three-dimensional structures by injecting an LTCC-feedstock, debindered and fired. Based on the developed technology demonstrators (pressure sensors) with integrated electrical respectively sensory functions were manufactured.
Literatur
Moritz T. et al.: Ceramic injection moulding: A review of developments in production technology, materials and applications. Powder Injection Moulding International 3 (2009) [3] 21–32
Gongora-Rubio, M.R., Espinoza-Vallejos, P., Sola-Laguna, L., Santiago-Avile, J.J.: Overview of low temperature co-fired ceramics tape technology for meso-system technology. Sensors and Actuators A 89 (2001) 222–241
Partsch, U. et al.: LTCC-based sensors for mechanical quantaties. Proc. 16th European Microelectronics and Packaging Conference & Exhibition, Oulu, FL, (2007) 381–388
Belavič, D. et al.: PZT Thick Films for Pressure Sensors: Characterisation of Materials and Devices. Proc. 2nd Electronics Systemintegration Technology Conference, Greenwich, UK, (2008) 989–994
Johannaber, F., Michaeli, W.: Handbuch Spritzgießen. 2. Auflage, Carl Hanser Verlag, München, (2004) 605–635. ISBN 978-3-446-22966-2
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ziesche, S., Lenz, C. & Mueller-Köhn, A. Mehrlagenkeramik und Keramikspritzguss — eine technologische Kombination zur Herstellung dreidimensionaler funktioneller Keramikkomponenten. Keram. Z. 69, 29–33 (2017). https://doi.org/10.1007/BF03400289
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03400289