Advertisement

JOM

, Volume 27, Issue 6, pp 15–20 | Cite as

Control-rolled high-strength low-alloy plate steel

  • G. J. Roe
  • G. D. Marsh
Technical Article
  • 5 Downloads

Abstract

In a combined laboratory-mill development program Bethlehem has found that lower carbon and the proper rolling practice provide a desired balance of yield strength and improved impact properties.

Keywords

Impact Property Notch Toughness Shelf Energy Columbium Rolling Practice 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Marsh G. D., “Improved Notch Toughness and Through Thickness Ductility of Plates,” AIME Mechanical Working and Steel Processing Conference, 1974, p. 107.Google Scholar
  2. 2.
    Duquette, W. H., Gritting, N. R., Miller, T. W., “Low Sulfur Steel (.005% S) from Mag-Coke Desulfurized Hot Metal,” AIME Open Hearth Proc., 1973, p. 79.Google Scholar
  3. 3.
    Bramfitt, B. L., and Marder, A. R., “The Influence of Microstructure and Crystallographic Texture on the Strength and Notch Toughness of a Low-Carbon Steel, ” AIME Processing and Properties of Low Carbon Steel, 1973, p. 191.Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 1975

Authors and Affiliations

  • G. J. Roe
  • G. D. Marsh

There are no affiliations available

Personalised recommendations