Advertisement

JOM

, Volume 44, Issue 2, pp 32–33 | Cite as

Life-prediction technology for aging plants and structural components

  • Peter K. Liaw
Power-Plant Life Prediction Commentary

Keywords

Nuclear Power Plant Aging Plant Engineer Fracture Mechanics Lile Steam Pipe 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    R. Viswanathan, Damage Mechanisms and Life Assessment of High-Temperature Components (Materials Park, OH: ASM, 1989).Google Scholar
  2. 21.
    P.K. Liaw, A. Saxena, and J. Schaefer, Engineering Fracture Mechanics, 32 (1989), p. 675.Google Scholar
  3. 3.
    Ibid., p. 709.Google Scholar
  4. 4.
    P.K. Liaw and A. Saxena, “Remaining-Life Estimation of Boiler Pressure Parts-Crack Growth Studies,” EPRI CA-4688, Project 2253-7, Final Report (Palo Alto, CA: EPRI, July 1986).Google Scholar
  5. 5.
    P.K. Liaw et al., Met. Trans. A, 22A (1991), p. 455.Google Scholar
  6. 6.
    P.K. Liaw, G.V. Rao, and M.G. Burke, Matls. Sci. and Eng., A131 (1991), p. 187.Google Scholar
  7. 7.
    P.K Liaw et al., “Fracture Toughness Properties in Ex-Service Cr-Mo Steels,” Proceedings of 22nd ASTM National Symposium on Fracture Mechanics (Philadelphia, PA: ASTM), in press.Google Scholar
  8. 8.
    P.K. Liaw and A. Saxena, “Crack Propagation Behavior Under Creep Conditions,” International Journal of Fracture, in press.Google Scholar
  9. 9.
    W.A. Logsdon et al., Engineering Fracture Mechanics, 25 (1986), p. 259.Google Scholar
  10. 10.
    A. Saxena et al., Engineering Fracture Mechanics, 25 (1986), p. 289.Google Scholar
  11. 11.
    V.P. Swaminathan et al., “An Initiation and Propagation Approach for the Life Assessment of an HP-IP Rotor,” Proceedings of Electric Power Research Institute Conference on Life Extension and Assessment of fossil Plants (Palo Alto, CA: EPRI, 1986).Google Scholar
  12. 12.
    N.S. Cheruvu, Met. Trans. A, 20A (1989), p. 87.Google Scholar
  13. 13.
    C.E. Jaske, Chemical Engineering Progress (April 1987), p. 37.Google Scholar
  14. 14.
    P.K. Liaw, R.E. Shannon, and A. Saxena, “Life Extension Technology for Steam Pipe Systems,” Final Report, Contract No. PI-093-047 (Pittsburgh, PA: Westinghouse Science & Technology Center, 1989).Google Scholar
  15. 15.
    P.K. Liaw et al., “Life Extension Technology for Steam Pipe Systems—Part I: Materials Properties,” Final Report, Contract No. PI-355488 (Pittsburgh, PA: Westinghouse Science & Technology Center, 1991).Google Scholar
  16. 16.
    A. Saxena and P.K. Liaw, “Life Extension Technology for Steam Pipe Systems—Part II: Fatigue Life Analysis and Computer Program,” Final Report, Contract No. PI-355488 (Pittsburgh, PA: Westinghouse Science & Technology Center, 1991).Google Scholar
  17. 17.
    P.K. Liaw et al., “Life Extension Technology for Steam Pipe Systems—Part I: Nondestructive Evaluation of Steam Pipe Wall Thickness” (Pittsburgh, PA: Westinghouse Science & TechnOlogy Center, 1991).Google Scholar
  18. 18.
    P.K. Liaw et al. “Life Extension of Technology for Steam Pipe Systems—Part II: Development of Materials Properties” (Pittsburgh, PA: Westinghouse Science & Technology Center, 1991).Google Scholar
  19. 19.
    P.K. Liaw, A. Saxena, and J. Perrin, “Life Extension Technology for Steam Pipe Systems—Part III: Development of Life Prediction Methodology” (Pittsburgh, PA: Westinghouse Science & Technology Center, 1991).Google Scholar
  20. 20.
    V.P. Swaminathan, P. Lowden, and J. Liburdi, “Assessment and Extension of Life of Combustion Turbine Blades,” Report RP2775-6 (Palo Alto, CA: EPRI, December 1988).Google Scholar
  21. 21.
    E. Crombie et al., “Degradation of High Temperature Impact Properties of Nickel-Base Gas Turbine Blade Alloy,” Proceedings of the 12th CEMAC Conference, vol. C (1977).Google Scholar
  22. 22.
    A.G. Pard, “Long Time Aging Studies of Some Nickel-Base Alloys,” Final Report, Project RP2775-1 (Palo Alto, CA: EPRI, 1988).Google Scholar
  23. 23.
    W.G. Clark, jr., and M.J. Metala, Proceedings of Electric Power Research Institute Conference on Life Extension and Assessment of Fossil Plants (Palo Alto, CA: EPRI, 1986).Google Scholar
  24. 24.
    D.C. Jiles, J. Phys. D., 21 (1988), p. 1,186.Google Scholar
  25. 25.
    D.C. Jiles, S. Hariharan, and M.K. Devine, IEEE Trans.Mag., 26 (1990), p. 2,577.Google Scholar
  26. 26.
    M.K. Devine et al., “Effects of Prestaining on the Magnetic Properties of 4340 Steels,” Review of Progress in Quantitative Nondestructive Evaluation (Prenum Press, 1991).Google Scholar
  27. 27.
    J.P. Stubbins et al., Proceedings of the 5th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems (La Grange Park, IL: American Nuclear Society, 1991).Google Scholar
  28. 28.
    L. J. H. Brasche et al., “NDE Characterization of the Microstructure and Mechanical Properties of Al-Li Alloys,” Nondestructive Evaluation and Material Properties of Advanced Materials, ed. P.K. Liaw, O. Buck, and S.M. Wolf (Warrendale, PA: TMS, 1991), pp. 5–14.Google Scholar
  29. 29.
    R.B. Thompson and Y. Li, “Ultrasonic Techniques for Monitoring Texture,” Nondestructive Evaluation and Material Properties of Advanced Materials, ed. P.K. Liaw, O. Buck, and S.M. Wolf (Warrendale, PA: TMS, 1991), pp. 55–62.Google Scholar

Copyright information

© TMS 1992

Authors and Affiliations

  • Peter K. Liaw
    • 1
  1. 1.Fracture Mechanics and Nondestructive Evaluation Laboratory at Westinghouse Science & Technology CenterPittsburgh, PennsylvaniaUSA

Personalised recommendations