Abstract
A design of coating on the entrance surface of the beam splitters with a transparent thin film of certain refractive index and thickness was presented. For this kind of beam splitters, it was possible to realize polarization-independent beam-splitting for chosen wavelength λ with incident angle ϕ. In addition, the simulation results using the coating designable software (Auto film) were consistent with the theoretical results, and the beam splitters are not sensitive to the small errors of film-thickness and film refractive-index over a broad spectra.
Similar content being viewed by others
References
QI Hong-ji, HONG Rui-jin, and HE Hong-bo,Science in China Ser. E Engineering & Materials Science,35 (2005), 9.
LI Ming-yu, and GU pei-fu,Acta Photonica Sinica (in Chinese),32 (2003), 1231.
R. M. A. Azzam,Optics Letters,10 (1985), 107.
V. R. Costich.,Appl. Opt,99 (1970), 866.
H. F. Mahlein,Optica Acta,21 (1974), 577.
Alfred Thelen,Appl. Opt,15 (1976), 2983.
R. M. A. Azzam and N. M. Bashara,Ellipsometry and Polarized Light, North-Holland, Amsterdam., 1977, Sec 4. 2.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shi, M., Wu, Fq., Wang, Hl. et al. Design of coating for broadband polarization — independent beam splitters and analysis of its optical performance. Optoelectr. Lett. 2, 98–101 (2006). https://doi.org/10.1007/BF03034021
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF03034021