Effects of la concentration on the texturing and the electrical properties of sol-gel derived PLT thin films
- 23 Downloads
Lanthanum doped lead titanate (PLT) thin films consisting of different La concentrations were fabricated on Pt/Ti/SiO2/Si using sol-gel method. The films were dried at 440°C for 5 min and fired at 600°C using rapid thermal annealing (RTA) for 1min. The preferred orientation (texturing) and the morphology of the PLT film were changed with La concentration and a possible cause of the texturing has been discussed. The effects of La doping to the Lead titanate films on the dielectric constants, P-E hysteresis loop and pyroelectric coefficient were measured and discussed.
Key wordsPLT thin film sol-gel RTA electrical properties
Unable to display preview. Download preview PDF.
- 1.M. Shimizu, M. Fujimoto, T. Katayama, T. Tadashi, K. Nakaya, M. Fukugawa and Tamikawa, inFerroelectric Thin Films III (eds., E. R. Mayers, B. A. Tuttle, S. B. Desu and P. K.Larsen), (1996).Google Scholar
- 5.R. Takayama, Y. Tomita, K. Iijima and I. Ueda,Ferroelectrics 118, 325 (1991).Google Scholar
- 6.M. Okuyama and Y. Hamakawa,Ferroelectrics 63, 243 (1985).Google Scholar
- 9.D. S. Yoon, C. J. Kim, J. S. Lee, C. J. Choi, W. J. Lee and K. No, submitted toJ. Appl. Phys. Google Scholar
- 10.D. S. Yoon, C. J. Kim, J. S. Lee, W. J. Lee and K. No,J. Mater. Sci. 9, 420 (1994).Google Scholar
- 12.Y. Liu, W. Ren, J. H. Qiu, L. Zhang and X. Yao,Ferroelectrics 152, 195 (1994).Google Scholar
- 15.K. H. Hellwege and A. M. Hellwege, inFerroelectrics: Oxides III, Springer, Berlin (1981).Google Scholar