Advertisement

Characterization of alginate beads formed by a two fluid annular atomizer

  • Horngtwu Su
  • Rakesh Bajpai
  • George W. Preckshot
Session 3 Bioengineering research

Abstract

A two fluid atomizer for the formation of small alginate beads has been described. It produces beads of narrow size distribution, with mean diameters in the range of 50–500 μm. The design of the nozzle allows for quick disassembly for easy cleaning and sterile operation. Empirical correlations for the mean size distributions are also provided.

Index Entries

Alginate beads atomizer size distribution injection nozzle 

Nomenclature

db

average diameter of beads, µm

dn

external diameter of needle, µm

k

consistency index of solution, g.sm/cm

L

length of the nozzle, cm

m

flow index of solution, dimensionless

Δ p

pressure drop across the nozzle, g.cm/s2

R

internal radius of the nozzle, cm

Q1

liquid flow rate, cm3/s (cm3/h when so stated)

vg

gas velocity around the nozzle at 20°C and 1 atm, m/min

References

  1. 1.
    Brodelius, P. and Mosbach, K. (1982),Adv. Appl. Microbiol. 28, 1.CrossRefGoogle Scholar
  2. 2.
    Brodelius, P. and Nilsson, K. (1980),FEBS Lett. 122, 312.CrossRefGoogle Scholar
  3. 3.
    Tosa, T., Sato, T., Mori, T., Yamamoto, K., Takata, I., Nishida, Y., and Chibata, I. (1979),Biotechnol. Bioeng. 21, 1697.CrossRefGoogle Scholar
  4. 4.
    Wang, H. Y. and Hettwer, D. J. (1982),Biotechnol. Bioeng. 24, 1827.CrossRefGoogle Scholar
  5. 5.
    Tramper, J. (1985),Trends Biotechnol. 3, 45.CrossRefGoogle Scholar
  6. 6.
    Klein, J. and Vorlop, K. D. (1983),ACS Symp. Ser. 297, 377.CrossRefGoogle Scholar
  7. 7.
    Hulst, A. C, Tramper, J., van’t Riet, K., and Westerbeek, J. M. M. (1985),Biotechnol. Bioeng. 27, 870.CrossRefGoogle Scholar
  8. 8.
    Ryu, D., Kim, H. S., and Taguchi, H. (1984),J. Ferment. Technol. 62, 255.Google Scholar
  9. 9.
    Prokop, A. private communications.Google Scholar
  10. 10.
    Rehg, T., Dorger, C., Chau, P. C. (1986),Biotechnol. Lett. 8, 111.CrossRefGoogle Scholar
  11. 11.
    Snedecor, G. W. and Cochran, W. G.Statistical Methods, 7th ed., The Iowa State University Press, Ames, IA.Google Scholar
  12. 12.
    Nukiyama, S., and Tanasawa, Y. (1939),Trans. Soc. Mech. Engr. (Japan),5, 18, 68–75, inChemical Engineers Handbook, Perry, R. H. and Chilton, C. H., eds., 18, 58–67 (1973).Google Scholar
  13. 13.
    Laskowski, J. J. and Ranz, W. E. (1970),AIChE J. 16, 802.CrossRefGoogle Scholar
  14. 14.
    Perry, R. H. and Chilton, C. H., eds.,Chemical Engineers Handbook,18, 58–67 (1973).Google Scholar
  15. 15.
    Haas, P. A. (1975),AIChE J. 21, 383.CrossRefGoogle Scholar

Copyright information

© Humana Press Inc. 1989

Authors and Affiliations

  • Horngtwu Su
    • 1
  • Rakesh Bajpai
    • 1
  • George W. Preckshot
    • 1
  1. 1.Department of Chemical EngineeringUniversity of Missouri-ColumbiaColumbia

Personalised recommendations