Journal of Materials Shaping Technology

, Volume 7, Issue 1, pp 13–21 | Cite as

Shape catalogues in steel profile production

  • Helmut Riegger


Three different catalogues have been proposed for the multitude of special profiles made of steel: a design catalogue, classification arranged by further machining of the profile to produce the finished product, and a pattern catalogue. The summaries assist the designer in using the steel profiles, evaluate the manufacturing possibilities, and help the steel profile designer to use new computer-aided classifications.


Apply Metalworking Profile Pattern Material Shaping Technology Linear Guide Angle Profile 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    H. Riegger and M. Liebetruth:Konstruktion 36, 1984, pp. 353–358.Google Scholar
  2. 2.
    H. Riegger and C.R. Boer:J. Applied Metalworking 3, 1985, pp. 432–438.CrossRefGoogle Scholar
  3. 3.
    U. Völkers: Ph.D. Thesis, Technical University of Braunschweig, 1978.Google Scholar
  4. 4.
    K. Roth:Konstruieren mit Konstruktionskatalogen, 1st ed. pp. 209–212, Springer-Verlag, Berlin, 1982.Google Scholar
  5. 5.
    C.R. Boer and H. Riegger:Int. J. Mach. Tool Des. Res, 26, 1986, pp. 21–34.CrossRefGoogle Scholar

Copyright information

© Springer-Verlag New York Inc 1989

Authors and Affiliations

  • Helmut Riegger
    • 1
  1. 1.ABB Isoprofil GmbHMannheim 24FRG

Personalised recommendations