Metallurgical Transactions

, Volume 1, Issue 4, pp 1034–1036 | Cite as

The effect of atomic order on fracture surface morphology

  • M. J. Marcinkowski
  • James Larsen


Metallurgical Transaction Intergranular Fracture Fracture Surface Morphology Ni3Mn FeCo Alloy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    W. Justusson, V. E. Zackay, and E. R. Morgan:Trans. ASM, 1957, vol. 49, p. 905.Google Scholar
  2. 2.
    H. J. Leamy: Ph.D. Thesis, Iowa State University, Ames, Iowa, 1967.Google Scholar
  3. 3.
    H. J. Leamy and F. X. Kayser:Phys. Stat. Sol., 1969, vol. 34, p. 765.CrossRefGoogle Scholar
  4. 4.
    J. H. Westbrook:Mechanical Properties of Intermetallic Compounds, J. H. Westbrook, ed., John Wiley & Sons, New York, 1960.Google Scholar
  5. 5.
    J. H. Westbrook:J. Electrochem. Soc., 1956, vol. 103, p. 54.CrossRefGoogle Scholar
  6. 6.
    M. J. Marcinkowski and Henry Chessin:Phil. Mag., 1964, vol. 10, p. 837.CrossRefADSGoogle Scholar
  7. 7.
    M. J. Marcinkowski and D. S. Miller:Phil. Mag., 1961, vol. 6, p. 837.Google Scholar
  8. 8.
    Paul A. Flinn:Trans. TMS-AIME, 1960, vol. 218, p. 145.Google Scholar
  9. 9.
    E. C. W. Perryman:J. Inst. Metals, 1954-55, vol. 83, p. 369.Google Scholar
  10. 10.
    S. Harper:J. Inst. Metals, 1956-57, vol. 85, p. 415.Google Scholar
  11. 11.
    M. J. Marcinkowski:Phil. Mag., 1968, vol. 17, p. 159.CrossRefADSGoogle Scholar
  12. 12.
    J. H. Westbrook and D. L. Wood:J. Inst. Metals, 1962-63, vol. 91, p. 174.Google Scholar
  13. 13.
    J. H. Westbrook:Met. Rev., 1964, vol. 9, p. 415.Google Scholar
  14. 14.
    Norman S. Stoloff:Fracture, H. Liebowitz, ed., Vol. VI, p. 1, Academic Press, New York, 1968.Google Scholar
  15. 15.
    R. G. Davies and N. S. Stoloff:Trans. TMS-AIME, 1964, vol. 230, p. 390.Google Scholar
  16. 16.
    C. D. Beachem:Fracture, H. L. Liebowitz, ed., Vol. I, p. 243, Academic Press, New York, 1968.Google Scholar
  17. 17.
    M. J. Marcinkowski and D. E. Campbell: Third Bolton Landing Conference—Ordered Alloys—Structural Applications and Physical Metallurgy, September 8–10, 1969.Google Scholar
  18. 18.
    John R. Low, Jr:Deformation and Flow In Solids, R. Grammel, ed., p. 60, Springer-Verlag, Berlin, 1956.Google Scholar
  19. 19.
    Jacques Friedel:Dislocations, p. 320, Addison-Wesley Publishing Co., Inc., Reading, Mass., 1964.MATHGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society - ASM International - The Materials Information Society 1970

Authors and Affiliations

  • M. J. Marcinkowski
    • 1
  • James Larsen
    • 2
  1. 1.Engineering Materials Group and Department of Mechanical Engineering, Glenn L. Martin Institute of TechnologyUniversity of MarylandCollege Park
  2. 2.Non-Metallic Materials DivisionU.S. Naval Ordnance LaboratoryWhite Oak

Personalised recommendations