High-speed forging with active friction
- 29 Downloads
KeywordsHead Cylinder Active Friction Kinematic Condition Tube Press Moscow State Institute
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Unable to display preview. Download preview PDF.
- 1.V. L. Berezhnoi, V. N. Scherba, and A. I. Baturin, Forging with Active Friction [in Russian], Metallurgiya, Moscow (1988).Google Scholar
- 2.V. N. Shcherba, A. N. Kuznetsov, A. K. Svinarev, et al., “Improving the efficiency of horizontal direct-acting hydraulic presses through the use of active friction,” Tekhnol. Legkikh Splavov, No. 4, 64–69 (1990).Google Scholar
- 3.V. N. Shcherba and A. V. Gusev, “Control of the properties of forgings of hard-to-deform aluminum alloys,” in: Progressive Methods of Metal-Shaping [in Russian], Metallurgiya, Moscow (1986), pp. 25–36.Google Scholar
- 4.A. N. Eliseev, V. N. Shcherba, G. I. Éskin, and Yu. P. Pimenov, “Features of the hot-forging of hypereutectic silumins,” Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., No. 4, 25–29 (1996).Google Scholar
- 5.P. G. Miklyaev, Mechanical Properties of Light Alloys At Shaping Temperatures and Rates: Handbook [in Russian], Metallurgiya, Moscow (1994).Google Scholar
- 6.V. N. Shcherba, L. A. Kiselev, and L. V. Tyurina, “Results of reconstruction of direct-acting tube press P1680 to make use of active friction,” Tsvetn. Metall., No. 2, 66–71 (1995).Google Scholar
© Plenum Publishing Corporation 1997