Advertisement

Refractories and Industrial Ceramics

, Volume 40, Issue 1–2, pp 73–77 | Cite as

Improvement of the manufacturing process of carbon-containing refractories at magnezit works JSC and some results of their use in various metallurgical plants

  • V. N. Koptelov
  • A. M. Chuklai
  • V. Ya. Gushchin
  • O. I. Frolov
  • S. N. Prosvirov
  • V. A. Fedoseenko
Refractories at the User
  • 32 Downloads

Abstract

The Magnezit Works Company has developed and is installing a technology for manufacturing spinel-periclase-carbon refractories based on molten powders of periclase and aluminomagnesia spinel. Pilot tests of the refractories in a steel-melting ladle have shown that they can compete with the best foreign counterparts. The effectiveness of use of ShPUP refractories in the functional layer of the bottom and the branch pipe of the vacuum chamber of a batch degasser is shown. A study directed at creation of ShPUP refractories with elevated operating characteristics for the slag lines of ladles is carried out. The application range of the refractories is expected to widen.

Keywords

Functional Layer Titanium Boride Pilot Batch Intermediate Repair Caustic Magnesite 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    G. I. Kuznetsov, A. A. Kortel’, V. G. Borisov, et al., “Novel kinds of refractories for ferrous metallurgy,”Ogneupory, No. 1, 32–36(1992).Google Scholar
  2. 2.
    V. I. Sizov, “Novel solutions in lining domestic steel-casting furnaces,”Ogneupory, No. 5, 37–38 (1993).Google Scholar
  3. 3.
    A. P. Nagornyi, A. I. Kravchenko, V. V. Il’in, et al., “Use of unfired periclase-carbon refractories in parts of linings of 350-ton steel-casting ladles,”Ogneupory Tekh. Keram., No. 2, 37–39 (1998).Google Scholar
  4. 4.
    K. V. Simonov, V. V. Zagnoiko, G. V. Burdina, et al., “Effect of technological factors on the properties of wear-resistant periclase-carbon refractories,”Ogneupory, No. 12, 27–33 (1988).Google Scholar
  5. 5.
    L. I. Andrievskikh, L. D. Bocharov, V. N. Koptelov, et al., “Periclase-carbon refractories on a binder of technical lignosulfonates with complex-action additives,”Ogneupory, No. 3, 13–16 (1991).Google Scholar
  6. 6.
    Yu. D. Sagalevich, V. G. Borisov, E. Ya. Shapiro, et al., “Refractories for lining converter bottoms with combined blow of the metal by oxygen and neutral gas,”Ogneupory, No. 9, 4–8 (1986).Google Scholar
  7. 7.
    K. V. Simonov and V. N. Koptelov, “Effect of anti-oxidizing additives on the properties of periclase-carbon refractories on a nontoxic binder,”Ogneupory, No. 10, 32–34 (1989).Google Scholar
  8. 8.
    I. G. Ochagova, “Periclase-carbon refractories for lining oxygen converters, arc furnaces, and units for out-of-furnace treatment of steel,” in:Chern. Metal., Ser. Proizv. Sluzhba Ogneupory, AO Chermetinformatsiya, Moscow, 137–149 (1995).Google Scholar
  9. 9.
    L. B. Khoroshavin, “Refractories of a new generation,“Ogneupory, No. 8, 2–5 (1994).Google Scholar
  10. 10.
    L. I. Andrievskikh, R. Sh. Nazmutdinov, V. N. Koptelov, and O. I. Frolov, “Some results of the use of the technology of periclase-spinel refractories,”Ogneupory, No. 9, 31–33 (1996).Google Scholar

Copyright information

© Kluwer Academic/Plenum Publishers 1999

Authors and Affiliations

  • V. N. Koptelov
    • 1
    • 2
  • A. M. Chuklai
    • 1
    • 2
  • V. Ya. Gushchin
    • 1
    • 2
  • O. I. Frolov
    • 1
    • 2
  • S. N. Prosvirov
    • 1
    • 2
  • V. A. Fedoseenko
    • 1
    • 2
  1. 1.Magnezit Works Joint-Stock CompanyChelyabinsk RegionRussia
  2. 2.Oskol’skii Electrometallugical WorksBelgorod RegionRussia

Personalised recommendations