Rheology in the technology of ceramics and refractories. 9. Rheotechnological properties of plasticized HCBS with a siliceous composition
Plasticized HCBS based on quartz sands exhibit thixotropic-dilatant flow and a certain plasticity in contrast to the typical dilatant flow. This behavior is provided by introducing additives of highly disperse refractory clay and highly disperse molten quartz contained in waste of production of centrifugally cast quartz ceramics. The effect of the pH, the temperature, and the volume fraction of the solid phase of the HCBS on their properties is described.
KeywordsShear Rate Quartz Sand Effective Viscosity Rheological Characteristic Binding System
Unable to display preview. Download preview PDF.
- 1.Yu. E. Pivinskii,“Highly concentrated ceramic binding suspensions. Stabilization, rheological properties, and the principle of rheotechnological correspondence,”Ogneupory, No. 6, 6–13 (1988).Google Scholar
- 2.Yu. E. Pivinskii,Ceramic Binders and Ceramoconcretes [in Russian], Metallurgiya, Moscow (1990).Google Scholar
- 3.Yu. E. Pivinskii and A. V. Cherevatova,“Materials based on highly concentrated ceramic binding suspensions (HCBS). 3. Properties of mixed binders in the system of quartz-sand HCBS and refractory clay,”Ogneup. Tekh. Keram., No. 8, 22–26(1997).Google Scholar
- 4.Yu. E. Pivinskii and A. V. Cherevatova,“Materials based on highly concentrated ceramic binding suspensions (HCBS). A study and comparative analysis of methods for shaping silica ceramoconcretes,”Ogneup. Tekh. Keram.,No. 10,6 -11 (1997).Google Scholar
- 5.Yu. E. Pivinskii,“New castables and binding systems: Basic direction in design, production, and use of refractories in the XXIst century. Part I. Trend of development, binding systems,”Ogneup. Tekh. Keram., No. 2,4–13 (1998).Google Scholar
- 6.Yu. E. Pivinskii,“Refractory concretes of a new generation. General characteristics of binding systems,”Ogneupory, No. 12, 1–8 (1990).Google Scholar
- 7.Yu. E. Pivinskii, T. I. Litovskaya, and I. B. Volchek,“A study of centrifugal casting of ceramics. Main parameters and laws of the process,”Ogneupory, No. 11,2–6 (1991).Google Scholar
- 8.Yu. E. Pivinskii and E. A. Doroganov,“Rheology in the technology of ceramics and refractories. 7. Polydispersity and dilatancy of mixed HCBS,”Ogneup. Tekh. Keram., No. 11, 24–27 (1998).Google Scholar
- 9.A. V. Cherevatova,“A study of the effect of additives of refractory clays on the rheological and technological properties of siliceous binding suspensions and materials based on them,” in:Int. Conf.“Recourse- and Power-Saving Technologies for Building Materials, Articles, and Structures,“ Abs. Rep. [in Russian], Belgorod (1995), p. 146.Google Scholar