Advertisement

Bulletin of Materials Science

, Volume 19, Issue 4, pp 677–698 | Cite as

Recent developments in modeling the hot working behavior of metallic materials

  • V V Kutumarao
  • T Rajagopalachary
Article

Abstract

Three distinct trends in the modeling of hot working behavior of metallic materials are identified. These are respectively (a) analytical and numerical methods to characterize the material flow behavior and related macroscopic properties, (b) metallurgical models to predict microstructural parameters at each step in a multi-step processing operation, and (c) hot workability models to predict optimum conditions of temperature and strain rate for a single step deformation. Important features of the models are critically examined and some possible directions for future work indicated.

Keywords

Hot working modeling microstructural control processing maps 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Ahlblom B and Roberts W 1979Optimization of processing, properties and service performance through microstructural control, ASTM STP 672 Philadelphia USA, 296Google Scholar
  2. Alexender J M 1989Modeling of hot deformation of steels (ed.) J G Lenard (Berlin: Springer-Verlag) p. 101Google Scholar
  3. Altan T and Lahoti G D 1979Ann. CIRP 28 473Google Scholar
  4. Altan T, Oh S I and Gegel H L 1983Metal forming (Metals Park, Ohio, USA: ASM International)Google Scholar
  5. Amici E, Demofonto G, Lubrano M, Pietrosanti N and Kapaj N 1989Proc. Conf. NUMIFORM’89 (eds) E G Thompsonet al (Rotterdom: A A Balkema)Google Scholar
  6. Argyris J H and St Doltsinis 1981J. Comp. Meth. Appl. Mech. Engg. 25 31Google Scholar
  7. Badawy A, Oh S I and Altan T 1983Proceedings of ASME conference of computer engineers, (Chicago: ASME) 132Google Scholar
  8. Beynon J H, Brown P R, Mizban S I, Ponter A R S and Sellars C M 1986Proc. Conf. NUMIFORM’86 (eds) K Mattiasson, R Samuelsson, D Wood and O C Ziienkiewicz (Rotterdam: A A Balkema) p. 213Google Scholar
  9. Blazynski T Z 1983Applied elastoplasticity of solids (London: Macmillan Press) p. 74Google Scholar
  10. Boer C R and Rydstad H 1984J. Appl. Metal Working 3 421Google Scholar
  11. Cetlin P R, Yue S and Jonas J J 1993Materials Forum 14 245Google Scholar
  12. Choquet P, Lebon A and Perdrix Ch 1986ICSMA-7 (eds) H J McQueen, J P Bailon, J J Dickson and J J Jonas2 1025Google Scholar
  13. Collins I F 1968J. Mech. Phys. Solids 16 137CrossRefGoogle Scholar
  14. Gegel H L 1988Computer simulation in materials science (Metals Park Ohio: ASM International) p. 291Google Scholar
  15. Gegel H L, Malas J C, Doraivelu S M and Shende V A 1988Metals Handbook 14 Forming and forging (Metals Park, Ohio: ASM International) p. 407Google Scholar
  16. Gelten C J M and Konter A W A 1982Proc. Conf. NUMIFORM’82 p. 511Google Scholar
  17. Grober H, Charlier R and Cescotto C 1986Proc. Conf. NU MIFORM’89 (eds) E G Thompsonet al (Rotterdam: A A Balkema)Google Scholar
  18. Hill R 1987J. Mech. & Phys. Solids 35 23CrossRefGoogle Scholar
  19. Huetink J 1982Proc. int. conf. numerical methods in industrial forming processes (Swansea, UK: Pineridge Press) p. 501Google Scholar
  20. Huetink J, Van Del Lugt and Vreede T 1988 inModelling of metal forming processes (eds) J L Chenot and E Onate (Amsterdam: Kluwer)Google Scholar
  21. Johnson W, Sowerby R and Venter R D 1982Plane strain slip-line fields for metal deformation processes (Oxford: Pergamon Press)Google Scholar
  22. Kobayashi S 1982J. Appl. Metal Working 2 163Google Scholar
  23. Kopp R, De Souza M M, Dahl W and Hagen M 1988Steel Res. 59 542Google Scholar
  24. Kumar A K S 1987Criteria for predicting metallurgical instabilities in processing, MS Thesis, I.I.Sc., BangaloreGoogle Scholar
  25. Laasraoui A and Jonas J J 1991aMetall. Trans. A22 1545Google Scholar
  26. Laasraoui A and Jonas J J 1991bISIJ International 31 95Google Scholar
  27. Malas J C 1985A thermodynamic and continuum approach to the design and control of precision forging processes, MS Thesis, Wright State University, Dayton, Ohio, USAGoogle Scholar
  28. McLaren A J and Sellars C M 1992Mater. Sci. & Technol. 8 1090Google Scholar
  29. Medina S F and Lopez V 1993ISIJ International 33 605Google Scholar
  30. Montmittonnet P and Buesler P 1991ISIJ International 32 213Google Scholar
  31. Naghdi P M 1990J. Appl. Maths. & Phys. (ZAMP) 41 315CrossRefGoogle Scholar
  32. Najafi-zadeh A and Jonas J J 1992ISIJ International 32 233Google Scholar
  33. Owen D R J and Hinton E 1980Finite elements in plasticity (Swansea UK: Pineridge Press)Google Scholar
  34. Padmavardhani D and Prasad Y V R K 1992Mater. Sci. Eng. A155 245Google Scholar
  35. Parthington D and Talbot I 1980Hot working and forming processes (eds) C M Sellars and G J Davies (London: Institution of Metallurgists) p. 176Google Scholar
  36. Pietrzyk M 1986Proc. Conf. NUMIFORM’86 Gothenberg (eds) Mattiassonet al (Rotterdam: A A Balkema)Google Scholar
  37. Pietrzyk M, Kedzierski Z, Glowacki H, Kusiak H and Sinczak J 1994Steel Res. 65 95Google Scholar
  38. Pietrzyk M, Kedzierski Z, Kosiak H, Madej W and Lenard J G 1993Steel Res. 64 248Google Scholar
  39. Prasad Y V R K 1990Indian J. Technol. 28 435Google Scholar
  40. Prasad Y V R K, Gegel H L, Doraivelu S M, Malas J C, Morgan J T, Lark K A and Barker D R 1984Metall. Trans. A11 1883Google Scholar
  41. Raj R 1981Metall. Trans. A12 1089Google Scholar
  42. Rajagopalachary T 1994Hot workability studies in titanium and its alloys, PhD Thesis, Banaras Hindu University, Varanasi, IndiaGoogle Scholar
  43. Rajagopalachary T and Kutumbarao V V 1989Metals, Mater. & Process. 1 57Google Scholar
  44. Rajagopalachary T and Kutumbarao V V 1996Scr. Metall. & Material (to appear)Google Scholar
  45. Rantanen A, Malinen M, Ranta H and Kerhonen A S 1989Proc. Conf. NUMIFORM’89 (eds) E G Thompson, R G Wood, O C Ziienkiewicz, A Samuelsson and F F Collins (Rotterdam: A A Balkema) p. 355Google Scholar
  46. Rebelo N and Kobayashi S 1980Int. J. Mech. Sci. 22 699CrossRefGoogle Scholar
  47. Roberts W 1985aDeformation processing and structure (ed.) G Krause (Metals Park Ohio: ASM) p. 109Google Scholar
  48. Roberts W 1985bProc. ICSMA 7 (eds) H J McQueen, J P Bailon, J I Dickson, J J Jonas and M K Akben (London: Pergamon Press)3 1859Google Scholar
  49. Roberts W, Sandberg A, Siwecki T and Werlefors T 1984HSLA steels: Technology and applications (Metals Park Ohio: ASM International) p. 67Google Scholar
  50. Saito Y, Emami T and Tanaka T 1985Trans. Iron and Steel Inst. Jap. 25 1146Google Scholar
  51. Sekine H, Murayama T, Kageyama H and Kawashima Y 1982Thermomechanical processing of microalloyed austenite (eds) A J DeArdo, G A Ratz and P J Wray (Warrendale: Met. Soc. AIME) p. 41Google Scholar
  52. Sellars C M 1980Sheffield inter. conf. on hot working and forming processes (eds) C M Sellars and G J Davies (England: Met. Soc.) p. 3Google Scholar
  53. Sellars C M 1990Mater. Sci. & Technol. 6 107Google Scholar
  54. Sellars C M 1990Proc. int. symp. mathematical modeling of hot rolling of steel (ed.) S Yue (Hamilton: Canada) 1Google Scholar
  55. Sellars C M and Whiteman J A 1979The Metal Science 14 187Google Scholar
  56. Shimazaki Y and Thompson E G 1981Int. J. Numerical Meth. Eng. 17 97CrossRefGoogle Scholar
  57. Thomsen E G, Young C Y and Kobayashi S 1965Mechanics of plastic deformation in metal processing (New York: Macmillan)Google Scholar
  58. Wellstead P E 1979Introduction to physical systems modelling (London: Academic Press)Google Scholar
  59. Yada H 1987Proc. int. symp accelerated cooling of rolled steel (eds) G E Raddle and A F Crawley (Winnepeg, Canada: Pergamon Press)Google Scholar
  60. Yoshida H, Yosifusi A, Kosiki S and Saike M 1991ISIJ International 31 571Google Scholar
  61. Ziegler H 1963Progress in solid mechanics (eds) I N Sneddon and R Hill (Amsterdam, The Netherlands: North-Holland Publishing Co.)4 93Google Scholar
  62. Zhao D, Tuler I R and Lloyd 1992Scr. Metall. Mater. 27 41CrossRefGoogle Scholar

Copyright information

© the Indian Academy of Sciences 1996

Authors and Affiliations

  • V V Kutumarao
    • 1
  • T Rajagopalachary
    • 1
    • 2
  1. 1.Department of Metallurgical EngineeringBanaras Hindu UniversityVaranasiIndia
  2. 2.Department of Metallurgical EngineeringJawaharlal Nehru Technological UniversityHyderabadIndia

Personalised recommendations