References
J.E. Miller and F.E. Schmidt: “Slurry Erosion: Uses, Application, and Test Methods,”ASTM STP # 946, West Conshohocken, PA, 1987.
F.E. Schmidt: “Selecting Materials for a Widget,”Practical Failure Analysis, 2001,1(2), pp.4–6.
ASTM G40-90a, Standard Terminology Relating to Wear and Erosion, vol. 03.02, ASTM, West Conshohocken, PA, 1994, pp. 150–55.
R.M. Voitik: “Realizing Bench Test Solutions to Field Tribology Problems by Utilizing Tribological Aspect Numbers” inTribology: Wear Test Selection for Design and Application, STP 1199, ASTM, West Conshohocken, PA, 1993, pp. 45–9.
H.M. Anderson and F.E. Schmidt: inASTM Manual on Fuels, Lubricants and Standard: Application and Interpretation, MNL #37, ASTM, West Conshohocken, PA, July 2002 (in press).
H.M. Anderson: “The Use of Tribological Aspect Numbers in Bench Test Selection — A review Update,”STP 1404, ASTM, West Conshohocken, PA, 2001, pp. 283–95.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schmidt, F. Point. Practical Failure Analysis 2, 6–8 (2002). https://doi.org/10.1007/BF02715409
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02715409