Abstract
The dielectric and electromechanical properties of lead zirconate titanate [Pb(Zr, Ti)O3] ceramic added with neodymium oxide have been systematically studied employing the vector impedance spectroscopic (VIS) technique. The specimens were prepared using the mixed oxide route by adding different mol% of Nd2O3 (01 to 7mol%) in [Pb(Zr, Ti)O3] near morphotropic phase boundary. Piezoelectric equivalent circuit parameters R, L, Ca in series and Cb in parallel have been determined by simulating /Z/ and Θ plots. Electromechanical coupling coefficients and strain constants for the radial modes show a peak at about 3 mol%, the dielectric constant peaks at about 1 mol% and voltage constants peak at about 0–75 mol% of Nd2O3.
Similar content being viewed by others
References
Heywang W and Thomann H 1984Ann. Rev. Mater. Sci. 14 27
IRE Standards on Piezoelectric Crystals 1957Proc. IRE 45 354
IRE Standards on Piezoelectric Crystals 1961Proc. IRE 49 1161
Jaffe B, Cook W R and Jaffe H 1971Piezoelectric ceramics (London: Academic Press)
Katiyar V K, Srivastava S L and Singh Janardan 1994J. Appl. Phys. 76 1131
Katiyar V K, Srivastava S L and Singh Janardan 1997Ferroelectrics 193 21
Moulson A J and Herbert J M 1990Electroceramics (London: Chapman and Hall)
Tandon R P, Singh V and Swami N N 1992J. Mater. Sci. Lett. 11 327
Thomann H 1972Ferroelectrics 4 141
Troccaz M, Gonnard P and Eyraud L 1978Ferroelectrics 22 17
Wu Long, Lee Chung-Chang, Wu Tien Shou and Wei Chung-Chuang 1982Ferroelectrics 41 157
Xue W R, Schulze W A and Newnham R E 1990J. Am. Ceram. Soc. 73 1783
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Singh, J., Soni, N.C. & Srivastava, S.L. Dielectric and piezoelectric properties of neodymium oxide doped lead zirconate titanate ceramics. Bull Mater Sci 26, 397–399 (2003). https://doi.org/10.1007/BF02711183
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02711183