Abstract
Samples from 10 years oldLeucaena leucocephala grown in plantation in Morogoro (Tanzania) were studied to determine suitable Kraft pupling conditions and pulp properties for paper production. For comparison,Eucalyptus wood already being used by Southern Paper mills in Tanzania was also analysed. Analysis followed ISO and Scandinavian standards. The results showed thatL. leucocephala had an average basic density of 540 kg/m3 and an average fibre length of 1.125 mm with low decigrex number. Compared toEucalyptus, L. leucocephala needed tougher cooking conditions. Kraft pulping ofL. leucocephala with 20% effective alkali content and 2000 H-factor afforded a yield of 49.5% at a kappa number of 28.L. leucocephala wood likeEucalyptus needed low refining energy to improve some of its properties. Papersheets made fromL. leucocephala pulp had low tearing strength, average tensile strength, high opacity and TEA-strength with good formation. IncorporatingL. leucocephala pulp with other pulp types in paper making is recommended.
Zusammenfassung
An Proben von 10-jährigenLeucaena leucocephala aus Plantagenanbau in Tansania wurden geeignete Bedingungen für den Kraft-Aufschluß und die Papierherstellung untersucht. Zum Vergleich wurde auch Eukalyptusholz herangezogen, das bereits zur Papierherstellung in Tansania eingesetzt wird. Methoden nach ISO-Normen und skandinavischen Standards wurden angewendet,L. Leucocephala hatte eine mittlere Rohdichte von 540 kg/m3, eine durchschnittliche Faserlänge von 1,125 mm bei niedriger decigrex-Zahl. Im Vergleich mitEukalyptus benötigteL. leucocephala härtere Aufschlußbedingungen. Mit 20% effektivem Alkalianteil und einem H-Faktor=2000 wurden Ausbeuten von 49,5% erzielt bei einer Kappazahl von 28. Der Zellstoff ausL. leucocephala benötigte, ähnlich wieEukalyptus-Zellstoff nur geringe Mahlenergie, um seine Eigenschaften zu verbessern. Das entsprechende Papier zeigte niedrige Reißfestigkeit, durchschnittliche Zugfestigkeit, hohe Opazität und gute Blattbildung. Für die Papierherstellung kann eine Zumischung zu anderen Zellstoffen empfohlen werden.
Similar content being viewed by others
References
Barker G. R.: Paper making properties of young hardwoods. Tappi, August, 1974 Vol. 57, No. 8
Britt, K. W.: Handbook of Pulp and paper technology. 2nd. edn. Van Nostrand Reinhold company, NY., 1970
Lulandala, L. L.: Intercropping Leucaena leucocephala with maize and beans. Unpublished PhD thesis, Sokoine University of Agriculture Morogoro, Tanzania, 1985
National Academy of Sciences.: Leucaena: Promosing forage and tree crop for the tropics. Washington, 1977
Rydholm, S. A.: Pulp and paper interscience publishers, John Wiley and sons, N.Y., 1965
SCAN C1: 59 Kappa number of pulp
SCAN C18: 65 Disintegration of chemical pulp for testing
SCAN C19: 65 Determination of drainage resistance (°SR)
SCAN C24: 67 Beating in PFI mill
SCAN P2: 75 Conditioning of paper for testing
SCAN C26: 76 Forming handsheets
SCAN M6: 69 Fibre fractionation of mechanical pulp in the Mcnett apparatus
Smook, G. A.: Handbook for Pulp and paper technologists, TAPPI, Atlanta, USA, 1982
TAPPI: T 234 su-67 Coarseness of pulp fibres
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gillah, P.R., Ishengoma, R.C. Kraft pulping ofLeucaena leucocephala grown in Morogoro, Tanzania. Holz als Roh-und Werkstoff 51, 353–356 (1993). https://doi.org/10.1007/BF02663808
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02663808