Abstract
This paper describes typical processes used in North America for tensioning and leveling circular saws. It concentrates on the methods used to adjust the tensioning and leveling state of a circular saw, to achieve optimal operating conditions. The paper gives practical details of the adjustment processes involved and explains the theory of how they work.
Zusammenfassung
Dieser Beitrag beschreibt typische Methoden, die in Nordamerika zum Spannen und Ausrichten von Kreissägeblättern verwendet werden. Der Schwerpunkt liegt auf praktische Methoden zum Verbessern des Spannungszustandes und der Ausrichtung, so daß ein optimales Sägeverhalten erreicht werden kann. Praktische Hinweise der einzeinen Methoden und theoretische Frläuterungen ihrer Wirkensweise werden dargestellt.
Similar content being viewed by others
Literature
Schajer, G. S. 1992: North American Techniques for Circular Saw Tensioning and Leveling: Part I. Practical Measurement Methods. Holz als Roh- und Werkstoff 50 (1992) 111–116
Westergaard, R. 1986: Saw Performance Critical for Sawmill Efficiency, Research Shows. Logging and Sawmilling Journal. 17: 22–23.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schajer, G.S. North American techniques for circular saw tensioning and leveling: Practical adjustment methods. Holz als Roh-und Werkstoff 50, 153–157 (1992). https://doi.org/10.1007/BF02663257
Issue Date:
DOI: https://doi.org/10.1007/BF02663257