Zusammenfassung
Reines, nicht modifiziertes, sowie mit handelsüblichem Harnstoff-Formaldehydharz modifiziertes Pinus-halepensis-Tanninharz wurden als Bindemittel für einschichtige Laborspanplatten eingesetzt. Der Zusatz von 10% Harnstoff-Formaldehydharz im Tanninextrakt verbesserte die üblichen Spanplatteneigenschaften (Biege- und Querzugfestigkeit, Dickenquellung und Wasseraufnahme) und die Wettterbeständigkeit im Vergleich zu denen aus reinem Tanninharz. Höhere Harnstoff-Formaldehydharz-Anteile (20% und 50%) im Tanninharz wirkten negativ auf die mechanischen Eigenschaften und die Naßquerzugfestigkeit der Spanplatten während die hygroskopischen Eigenschaften (Quellung und Wasseraufnahme) leicht verbessert wurden.
Abstract
Tannins from pine bark (Pinus halepensis Mill.), unmodified or in combination with urea-formaldehyde (UF) resin were used as binders for one-layer experimental particleboards. The addition of 10% UF-resin in tannin improved the basic properties (bending and internal bond strength, thickness swelling and water absorption) as well as the wet bonding strength of the boards when compared with those glued with unmodified tannin resin. Glue formulations containing higher amounts of UF resin (20% or 50%) reduced the mechanical properties and wet bonding strength of the boards while hygroscopic properties (swelling and water absorption) were slightly improved.
Literatur
Anderson, B.A.; Breuer, J.R.; Nicholls, A.G. 1961: Bonding particleboards with bark extracts. Forest Prod. J. 11:226–227
Anderson, B.A.; Wu, K.-T.; Wong, A. 1974: Utilization of Ponderosa pine bark and its extract in particleboard. Forest Prod. J. 24:48–53
Ayla, C.; Weissmann, G. 1982: Verleimungsversuche mit Tanninformaldehydharzen aus Rindenextrakten von Pinus brutia Ten. Holz Roh-Werkstoff 40:13–18
Dalton, L.K. 1950: Tannin-formaldehyde resins as adhesives for wood. Australian J. Appl. Sci. 1:54–70
Deppe, H.-J. 1979: Tanninharze als Klebestoffe in der Spanplattenherstellung. Vorträge und Diskussionen der 37. Sitzung der Technischen Kommission der FESYP:28–34
Dix, B.; Marutzky R. 1983: Untersuchungen zur Gewinnung von Polyphenolen aus Nadelholzrinden. Holz Roh-Werkstoff 41:45–50
Dix, B.; Marutzky, R. 1984: Verteimung von Spanplatten mit Tannin-Formaldehydharzen aus dem Rindenextrakt von Pinus radiata. Holz Roh-Werkstoff 42:209–217
Dix, B.; Marutzky R. 1988: Tanninformaldehydharze aus den Rindenextrakten von Fichte (Picca abies) und Kiefer (Pinus sylvestris). Einsatz der Rindenextrakte als Bindemittel und Bindemittelzusatz in Holzwerkstoffen. Holz Roh-Werkstoff 46:19–25
Drilje, R.M. 1975: El extracto de quebracho como materia para adhesivos de paneles basados en madera. FAO World Consullation on Wood Based Panels. New Dehli, India
Gnamm, H. 1979: Die Gerbstoffe und Gerbmittel. Stuttgart. Wiss. Verlagsgesellschaft
Grigoriou, A.; Voulgaridis, H.; Passialis, C. 1987: Plywood bonding agents from bark extractives of Pinus halepensis Mill. Holzforsch. Holzverwert. 39:9–11
Hall, B.R.; Leonard, H.J.; Nicholls, A.G. 1960: Bonding particleboards with bark extracts. Forest. Prod. J. 10:263–272
Kavvouras, P. 1985: Bark extractives from Pinus halepensis and Pinus brutia as constituents of wood products bonding agents. I. Effects of extraction on the extractive yield and quality of formaldehyde requirement in reaction of extractives with HCHO. Forest Research, VI:21–42
Kavvouras, P. 1987: Particleboard glue from bark extractives of Pinus halepensis Mill. (in Greek). Scientific Meeting on Pinus halepensis and Pinus brutia Forests, 30 Sept.–2 Oct. 1987, Chalidiki, Greece
Knowles, E.; White, T. 1954: Tannin extracts as raw materials for the adhesives and resins industries. Adhesives and Resins 10:226–228, 11:255-258
Lüri, H.; Sairanen, H.; Kilpeläinen, H.; Kivistö, A. 1982: Bark extactives from spruce as constituents of plywood bonding agents. Holz Roh-Werkstoff 40:51–60
Passialis, C.; Grigoriou, A.; Voulgaridis, H. 1988: Verleimung von Spanplatten mit Rindenextrakten der Pinus halepensis Mill. Holzforsch. Holzverw. 40:50–52
Pizzi, A. 1979: Wattle-Base adhesives for exterior grade particleboards. Forest Prod. J. 28:42–47
Pizzi, A. 1980: Pine Tannin adhesives for particleboard. Holz Roh-Werskstoff 40:293–301
Plomley, K.F.; Gottstein, W.J.; Hillis, E.W. 1957: Tannin-Formaldehyde adhesives. C.S.I.R.O. (Australia). Forest Prod. Newsletter. No. 234:648
Sayman, H. 1978: The Chemistry and development of Wood adhesives from Wattle extract. Vortr. Refresh. Course Univers. Stellenbosch, Südafrika.
Stashevski, A.-M.; Deppe, H.-J. 1973: Zur Verwendung von Tanninharzen als Bindemittel für die Holzplattenherstellung. Holz Roh-Werkstoff 31:417–419
Tisler, V.; Ayla, C.; Weissmann 1983: Untersuchung der Rindenextrakte von Pinus halepensis Mill. Holzforsch. Holzverw. 35:113–116
Tsoumis, G. 1980: Forest Utilization in Greece. Thessaloniki.
Voulgaridis, E.; Grigoriou, A.; Passaalis, C. 1985: Investigations on bark extractives of Pinus halepensis Mill. Holz Roh-Werkstoff 43:269–272
Weissmann, G.; Ayla, C. 1980: Untersuchung der Rindenextrakte von Pinus brutia ten. Holz Roh-Werkstoff 38:307–312
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Grigoriou, A. Einsatz unmodifizierten und mit Harnstoff-Formaldehydharz modifizierten Rindenextraktes von Pinus halepensis Mill. als Bindemittel für Spanplatten. Holz als Roh-und Werkstoff 48, 377–380 (1990). https://doi.org/10.1007/BF02634526
Issue Date:
DOI: https://doi.org/10.1007/BF02634526