Zusammenfassung
Zur Verbesserung der Sortierung von Bauholz werden Prüfmethoden gesucht, die einerseits aussagekräftige Resultate liefern und andererseits sich durch cinfache handliche Geräte ausführen lassen. Eine größere Testeserie zeigte, daß sich eine Schraubenauszug-Testmethode nicht als Sortierhilfe eignet, da die Resultate keine genügende Aussagekraft bsitzen.
Abstract
To improve the grading of lumber, test methods are required giving representative results. The test devices should preferably be simple and handy. A sizable test series shows that a screw withdrawal test is an inadequate method as the results reflect bending and shear strength only to a minor extent.
Literatur
Eckelmann, C.A. 1973: Holding strength of serews in wood and woodbase materials. Rescarch Bulletin No. 895. Purdue University, West Lafayette
Eckelmann, C.A. 1975: Screwholding performance in hardwoods and particleboard. Eorest Prod. J. 25 (6):30–35
Eckelmann, C.A. 1978: Predicting withdrawal strength of shatmetal-type serews in selected hardwoods. Forest Prod. J. 28 (8):25–28
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Meierhofer, U. Schraubenauszugfestigkeit und Tragfähigkeit von Fichten- und Tannenholz. Holz als Roh-und Werkstoff 46, 15–17 (1988). https://doi.org/10.1007/BF02630549
Issue Date:
DOI: https://doi.org/10.1007/BF02630549