Zusammenfassung
Das Spannungs-und Verformungsproblem von Deckentafeln aus Holzrippen und Holzwerkstoffen wird mit der Methode der finiten Flemente (FE) unter Verwendung verschiedener Berechnungsmodelle gelöst. Die Besonderheiten der verwendeten Methode und des Berechnungsprogramms sowie Beispiele für Lösungen werden gegeben. Ein Vergleich der Resultate mit der bisherigen vereinfachten Berech-nungsmethode und mit den Resultaten der experimentellen Untersuchung wird durchgeführt.
Abstract
The problem of stresses and deformations in roof building panels from solid wood and wood based boards can be solved by applying the finite element method (FEM), using different computation models. The characteristics of this method and of the respective computer program, as well as some examples for solutions are given. A comparison is made between results acheived by a known simplified calculation method on the one hand and results of the experimental research on the other.
Literatur
Bathe, E.J., Wilson, E.L., Peterson, L.F. 1973: SAP IV, a structural analysis program for static and dynamic response of linear systems. Report EERC 73-11, Univ California, USA
CNS 73 1701: Design of wood structures. 3rd Ed., August 1984
DIN 1052: Holzbauwerke. Holztafeln. Berechnung und Ausführung. Teil III. April 1988
Foschi, R.O. 1969: Stress distribution, in plywood stressed skin panels with longitudinal stiffeners. Publication No. 1261, Department of Fisheries and Forestry, Canadian Forestry Service Ottawa, Canada
Mistler, H.L. 1977: Zur Berechnung der mittragenden Plattenbreite doppelschaliger Tafelemente. Holz Roh-Werkstoff 35:95–98
Möhler, K.; Abdel-Saydel, G.; Ehlbeck, J. 1963: Zur Berechnung doppelschaliger gelemter Tafelelmente. Holz Roh-Werkstoff 21:328–333
Najdekr, M. 1983: Actual behavior of full-size wood panels. Dis. Techn. Univ. Bratislava ČSSR
Smith, I. 1979; Analysis of plywood stressed skin panels with rigid or semirigid connections. Timber Research and Development Association (TRADA) Report 1/79
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Najdekr, M. Zur Analyse geleimter doppelschaliger Holztafel-Elemente. Holz als Roh-und Werkstoff 47, 61–66 (1989). https://doi.org/10.1007/BF02628615
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02628615