Zusammenfassung
Anhand einer Übersichstabelle wird das themenbezogene Arbeitsprogramm des TC 112 „Holzwerkstoffe” sowie der heute erreichte Bearbeitungsstand dargelegt.
Die grundlegenden Prüfnormen sind weitgehend fertiggestellt. Die Anforderungsnormen bei Spanplatten und OSB-Platten sind im Entwurfsstadium (prEN), die für MDF-Platten ist noch in Diskussion.
Im schon verabschiedeten Teil 1 „Allgemeine Anforderungen” der Spanplattennormenserie EN 312 sind 2 Formaldehyd-Klassen gebildet worden; eine nationale A-Abweichung wurde verankert, die den Bezug zur Gefahrstoff-Verordnung herstellt.
Anhand des Dickenbereiches über 13 bis 20 mm werden vergleichend die Eigenschaftsanforderungen für die gebildeten 6 Spanplattentypen vorgestellt.
Es wird sodann über den Stand der Normung der Formaldehyd-Meßmethoden berichtet.
Auf eine Reihe von noch diskutierten Angelegenheiten wird eingegangen: Übernahme der CEN-Normen durch DIN; „Charakteristische Werte” für baurelevante Platteneigenschaften; „Feuchtebeständige Spanplatten”; OSB- und MDF-Plattennormen.
Die Bereiche Holzschutz sowie Produkt- und Produktionsüberwachung und schließlich verwendungsbezogene Normung stellen weitere, z. T. erst begonnene Arbeitsfelder dar.
Abstract
A breakdown of subjects related to the working programme of TC 112 “Wood based panels” and the most up-to-date status is represented in a survey table. Basic test standards have almost been completed. Standards for particleboard and OSB specifications have been drafted (prEN), while those for MDF are still under discussion. For the accepted part 1 “General Specifications” of the particleboard standardization series EN 312 two formaldehyde classes were formed. A national A-deviation was stipulated, which relates to the German “Gefahrstoff-Verordnung” (Hazardous-Material-Regulation). Over a thickness range of between 13 and 20mm a comparison is presented of property specifications for the 6 different particleboard types. This is followed by a report on the status of standardization for formaldehyde determination (assessment, measuring) methods. Mention is made of a number of issues still under discussion such as the replacement of national (DIN) by CEN standards; “Characteristic values” for structural properties of wood based boards; “Moisture resistant particleboards”; OSB and MDF standards. Further areas for which standardization work has only recently begun are wood preservation, product and production control and lastly, application-related standardization.
Literatur
Mobil Spanplatten Symposium am 2. Juni 1989 in Grafenau
Author information
Authors and Affiliations
Additional information
Herrn Prof. Dr. H. Schulz anläßlich seines Ausscheidens aus dem Dienst gewidmet
Referat auf dem Holzwerkstoffsymposium, der Mobil Oil AG am 11. 9. 1992 in Braunlage
Rights and permissions
About this article
Cite this article
Barghoorn, A.W. Stand der CEN-Normung auf dem Gebiet der Span- und MDF-Platten. Holz als Roh-und Werkstoff 51, 187–192 (1993). https://doi.org/10.1007/BF02628278
Issue Date:
DOI: https://doi.org/10.1007/BF02628278